So bietet man in diesem Land: Portale, Fristen, Schwellenwerte →
Ili hyrer/hyrel
DEDeutschland · Kassel
Ihr Weg zur Abgabe
- Frist für Teilnahmeanträge: 19. November um 12:00 — noch 18 Tage. Zweistufiges Verfahren: Bis zu dieser Frist reichen Sie einen Teilnahmeantrag ein (Eignungsnachweise). Ein Angebot gibt nur ab, wer danach ausgewählt und dazu aufgefordert wird.
- Die Abgabestelle steht in der Bekanntmachung (Link auf dieser Seite).
- Angebot und Nachweise in: Deutsch, Englisch.
- Nachweise sammeln — nutzen Sie die Eignungs-Analyse auf dieser Seite: sie listet die Anforderungen und zu bekannten Bescheinigungen den Beschaffungsweg.
Automatisch zusammengestellt aus Bekanntmachung und Unterlagen — Angaben ohne Gewähr, verbindlich ist der Wortlaut des Verfahrens.
Was der Auftraggeber sucht
Ein Energieunternehmen braucht technische Inspektionen (ILI) von drei Rohrabschnitten einer Gasleitungsanlage, um diese später auf Wasserstoff umzustellen.
- Vier (4) Durchläufe mit Reinigungspigs pro Abschnitt, beim ersten Durchlauf muss ein bi-direktionales Pig mit mechanischer oder intelligenter Messlehre den Rohrdurchgang nachweisen
- Mindestens zwanzig (20) Inspektionsmessgeräte (AGM) pro Abschnitt; Messung von Biegeverformung und inneren/äußeren Materialverlust, Geometrieabweichungen, Risse, Härte- und Festigkeitsvariationen im Rohr
- Messung der axialen Dehnung über gesamte Abschnittslängen mit kombinierter Fitness-For-Service-Bewertung nach POF 100 edition 2021
Vereinfacht aus der amtlichen Bekanntmachung — der Wortlaut folgt darunter.
Die deutsche Zusammenfassung wird vorbereitet. Unten die amtliche Beschreibung in der Originalsprache (EN).
Originalbeschreibung zeigen (EN)
The purpose of the project is In-Line Inspection (ILI) for pipeline technical condition assessment prior to the transition from natural gas (NG) to hydrogen operation. · For the pipeline sections 1 to 3 mechanical cleaning using i.e. bi-directional cleaning pigs is considered. Four (4) cleaning pig runs shall be assumed to be required per pipeline section. For the very first cleaning pig run per section a bi-directional pig must be offered which shall proof pig passage by either mechanical or intelligent gauge plate(s). · For the pipeline sections 1 to 3 mapping of the pipeline is considered over the entire section or a to be determined sub-section of it. A minimum of twenty (20) AGMs must be provided per section. Inertial measurement data are considered for bending strain analysis which shall be offered as a combined service. For the pipeline sections 1 to 3 the following pipeline anomalies shall be addressed by ILI technologies: · Offered services shall consider internal and external metal-loss detection and sizing in straight pipe, field- and hot-bends. In case a combination of ILI technologies implemented on one or more ILI tools which enable a combined data analysis leading to a superior perfor-mance compared to individual ILI technologies, the technologies shall be offered as a com-bined service and shall be emphasized as such. · Offered services shall consider detection and sizing of geometric deviations from the norm of straight pipe and in bends. · Offered services shall consider detection and sizing of axially oriented crack and crack-like anomalies. The definition of terms is according to the publicly available Pipeline Operators Forum Recommended Practice POF 100 edition 2021. · Offered services shall consider detection and sizing of localized variations of the pipe materi-al hardness with respect to the mean material hardness per joint and exceeding an upper and lower bound threshold depending on the offered tool performance. · Offered services shall consider detection of pipe material yield strength variation per joint with respect to available pipe material records per joint. · Offered services shall consider measurement of the axial strain along the entire section lengths. The service shall be offered as a combined service of ILI, strain-based Fitness-For-Service assessment and, if possible, a total strain assessment including bending strain as-sessment results (see Lot 2). Pipe samples and pipe sample data can be provided upfront if needed to enhance the offered performance.
Auftrag
AuftraggeberGASCADE Gastransport GmbH →
ArtDienstleistung
Geschätzter WertWert nicht veröffentlicht
Veröffentlicht20. Okt. 2026
VerfahrenVerhandlungsverfahren mit Teilnahmewettbewerb
16 LoseKMU-vorbehalten
Art der Leistung
76 · Dienste für Öl- & Gasindustrie
CPV 76600000
Clement Was die Zahlen über diesen Auftraggeber sagen
- 47 % der Zuschläge dieses Auftraggebers gingen an Unternehmen, die hier schon einmal gewonnen hatten (52 Zuschläge seit 2024, verteilt auf 28 Unternehmen). 53 % gingen an neue Namen.n = 52 Zuschläge seit 2024
- Im Median lagen 2 Angebote je Verfahren auf dem Tisch (40 Verfahren mit Bieterzahl); bei 45 % blieb es bei einem einzigen Bieter. Branche: 2 Angebote im Median.n = 40
- 2 % der Zuschläge gingen an Unternehmen aus dem Ausland (52 Zuschläge mit bekanntem Gewinnerland). Branchenschnitt: 6 %.n = 52
- In 11 Verfahren mit strukturierten Eignungskriterien verlangte dieser Auftraggeber am häufigsten: Eintragung im Handelsregister (9 von 11), Betriebs-/Berufshaftpflichtversicherung (7 von 11), Referenzen: Dienstleistungen (6 von 11), Durchschnittlicher Mindestjahresumsatz (6 von 11).n = 11
- Von der Bekanntmachung bis zum Zuschlag vergehen hier im Median 61 Tage (11 Verfahren).n = 11
Aus den dokumentierten Zuschlägen dieses Auftraggebers; Vergleichswerte aus derselben Branche und demselben Land. Keine Prognose, keine Rechtsberatung. Stand 01.11.2026.
Clement
Bei vergleichbaren Aufträgen dieser Branche im Land (104 mit bekannter Bieterzahl) gingen meist nur 2 Angebote ein — ein solides Angebot hat echte Chancen.
Was Sie nachweisen müssen — Eignungskriterien
›
Eintragung im Handelsregister
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverifi… vollständig leseneinklappen
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverified copy), provided that the tenderer is registered in the professional or commercial register. In case of non-registration: The submission of a business registration (for foreign tenderers: or equivalent). The proof must identify at least the persons authorized to represent the company. The proof may be submitted in (non-certified) photocopy/photocopy (PDF), but must be clearly legible and formulated in German or English (if necessary, translated). The proof must not be older than 12 months at the time of publication of this announce-ment. Refer to Attachment A.1 Forms and Proofs (Suitability), Proof 1.
›
Eintragung im Handelsregister
PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB … vollständig leseneinklappen
PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB is possible. See Attachment A.1 Forms and Certificates (Suitability), Form 3.1 (or Form 3.2).
›
Eintragung im Handelsregister
PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). - PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). See Attachment A.1 Forms and Certificates (Suitability), Form 8.
›
Eintragung im Handelsregister
PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. - PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. See Attachment A.1 Forms and Certificates (Suitability), Form 9 (or Form 10).
›
Mindestumsatz im Auftragsbereich
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a compan… vollständig leseneinklappen
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a company has not been active on the market for three years, it shall provide a business plan for the missing years, stating the expected annual revenue. Minimum requirement (failure to meet will result in exclusion): The annual revenue in EUR (net) for each of the last 3 (three) completed fi-nancial years, broken down by lot, must be for Lot 1, at least 480.000,00 EUR. for Lot 2, at least 100.000,00 EUR. for Lot 3, at least 1.300.000,00 EUR. for Lot 4, at least 500.000,00 EUR. for Lot 5, at least 10.000.000,00 EUR. for Lot 6, at least 900.000,00 EUR. for Lot 7, at least 700.000,00 EUR. for Lot 8, at least 900.000,00 EUR. for Lot 9, at least 160.000,00 EUR. for Lot 10, at least 50.000,00 EUR. for Lot 11, at least 200.000,00 EUR. for Lot 12, at least 150.000,00 EUR. for Lot 13, at least 1.000.000,00 EUR. for Lot 14, at least 220.000,00 EUR. for Lot 15, at least 160.000,00 EUR. for Lot 16, at least 220.000,00 EUR. If the applicant wishes to submit a tender for several lots, the minimum requirements must be met cumulatively. This means that, for a tender covering all 16 lots, evidence of an annual revenue of EUR 17.040.000,00 (net) must be provided for each of the last three (3) completed financial years. Refer to Attachment A.1 Forms and Certificates (Suitability), Form 6.
›
Betriebs-/Berufshaftpflichtversicherung
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standar… vollständig leseneinklappen
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standard insurance for personal injury, property and financial damages. Minimum requirement (failure to meet will result in exclusion): The amount of liability cover for personal injury, property damage and financial loss must be at least EUR 10 million per insurance year. If insurance with these coverage levels does not currently exist, it is sufficient to sub-mit 1. a self-declaration by the tenderer that it is prepared to take out ap-propriate insurance at the first request of the contracting entity in the event of a contract award and 2. an irrevocable declaration by an insurer (in non-verified copy) that it is willing to take out the corresponding insurance. The proof can be presented in photocopy/photocopy (PDF), but must be clearly legi-ble. The proof must not be older than 12 months at the time of the expiry of the dead-line for submitting offers. Refer to Attachment A.1 Forms and proof (suitability), Proof 2.
›
Referenzen: Dienstleistungen
TL1: References - TL1: Information on the performance of relevant and comparable services (refer-ences) in the last six (6) years since the publication of the announcement. The refer-ence must be comparable to the service to be contracted here in terms of type… vollständig leseneinklappen
TL1: References - TL1: Information on the performance of relevant and comparable services (refer-ences) in the last six (6) years since the publication of the announcement. The refer-ence must be comparable to the service to be contracted here in terms of type, scope and level of difficulty. To demonstrate comparability, references must contain at least the following infor-mation: 1. Reference title 2. Client (If the client may not be named for data protection reasons, it is sufficient to categorize the client (research, industry, other sectors of the contracting enti-ty) and to confirm that the reference is comparable to the tendered service.) 3. Contact person incl. contact details (e.g., e-mail, telephone number) (If the contact person may not be named for data protection reasons, it is suffi-cient to categorize the client (research, industry, other sectors client) and con-firm that the reference is comparable to the tendered service.) 4. Brief description of the ILI service(s) performed 5. Inspected pipeline section outer diameter 6. Nominal wall thickness 7. Seamweld type 8. Length 9. Pipeline medium 10. Medium flow conditions 11. Mean operating pressure during inspection 12. Order value in EUR (net) 13. Execution period Minimum requirement (failure to meet will result in exclusion): There are at least 2 relevant (comparable) references per Lot and ILI service. Refer to Attachment A.1 Forms and Certificates (Eligibility), Form 7.
›
Unabhängiges Qualitätszertifikat (z. B. ISO 9001)
TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent - TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent. Minimum requirement (failure to meet will result in exclusion): Proof of valid certificatio… vollständig leseneinklappen
TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent - TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent. Minimum requirement (failure to meet will result in exclusion): Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent must be submitted. Refer to Attachment A.1 Forms and Certificates (Eligibility), Proof 3.
›
Eintragung im Handelsregister
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverifi… vollständig leseneinklappen
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverified copy), provided that the tenderer is registered in the professional or commercial register. In case of non-registration: The submission of a business registration (for foreign tenderers: or equivalent). The proof must identify at least the persons authorized to represent the company. The proof may be submitted in (non-certified) photocopy/photocopy (PDF), but must be clearly legible and formulated in German or English (if necessary, translated). The proof must not be older than 12 months at the time of publication of this announce-ment. Refer to Attachment A.1 Forms and Proofs (Suitability), Proof 1.
›
Eintragung im Handelsregister
PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB … vollständig leseneinklappen
PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB is possible. See Attachment A.1 Forms and Certificates (Suitability), Form 3.1 (or Form 3.2).
›
Eintragung im Handelsregister
PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). - PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). See Attachment A.1 Forms and Certificates (Suitability), Form 8.
›
Eintragung im Handelsregister
PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. - PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. See Attachment A.1 Forms and Certificates (Suitability), Form 9 (or Form 10).
›
Mindestumsatz im Auftragsbereich
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a compan… vollständig leseneinklappen
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a company has not been active on the market for three years, it shall provide a business plan for the missing years, stating the expected annual revenue. Minimum requirement (failure to meet will result in exclusion): The annual revenue in EUR (net) for each of the last 3 (three) completed fi-nancial years, broken down by lot, must be for Lot 1, at least 480.000,00 EUR. for Lot 2, at least 100.000,00 EUR. for Lot 3, at least 1.300.000,00 EUR. for Lot 4, at least 500.000,00 EUR. for Lot 5, at least 10.000.000,00 EUR. for Lot 6, at least 900.000,00 EUR. for Lot 7, at least 700.000,00 EUR. for Lot 8, at least 900.000,00 EUR. for Lot 9, at least 160.000,00 EUR. for Lot 10, at least 50.000,00 EUR. for Lot 11, at least 200.000,00 EUR. for Lot 12, at least 150.000,00 EUR. for Lot 13, at least 1.000.000,00 EUR. for Lot 14, at least 220.000,00 EUR. for Lot 15, at least 160.000,00 EUR. for Lot 16, at least 220.000,00 EUR. If the applicant wishes to submit a tender for several lots, the minimum requirements must be met cumulatively. This means that, for a tender covering all 16 lots, evidence of an annual revenue of EUR 17.040.000,00 (net) must be provided for each of the last three (3) completed financial years. Refer to Attachment A.1 Forms and Certificates (Suitability), Form 6.
›
Betriebs-/Berufshaftpflichtversicherung
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standar… vollständig leseneinklappen
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standard insurance for personal injury, property and financial damages. Minimum requirement (failure to meet will result in exclusion): The amount of liability cover for personal injury, property damage and financial loss must be at least EUR 10 million per insurance year. If insurance with these coverage levels does not currently exist, it is sufficient to sub-mit 1. a self-declaration by the tenderer that it is prepared to take out ap-propriate insurance at the first request of the contracting entity in the event of a contract award and 2. an irrevocable declaration by an insurer (in non-verified copy) that it is willing to take out the corresponding insurance. The proof can be presented in photocopy/photocopy (PDF), but must be clearly legi-ble. The proof must not be older than 12 months at the time of the expiry of the dead-line for submitting offers. Refer to Attachment A.1 Forms and proof (suitability), Proof 2.
Die Anforderungstexte stehen in der Originalsprache der Bekanntmachung — verbindlich ist der amtliche Wortlaut.
Vergabeunterlagen — Direktdownload
⤓
Vergabeunterlagen des Auftraggebers
Leistungsbeschreibung und Anlagen beim Auftraggeber — meist ohne Anmeldung einsehbar
⤓
Bekanntmachung als PDF (DE)
Die vollständige Bekanntmachung, amtlicher Wortlaut
Wer bei diesem Auftraggeber bisher gewonnen hat
Über alle Auftragsarten dieses Auftraggebers — nicht nur diese Sparte. Eine Stadt kauft Software und Feuerwehrfahrzeuge beim selben Einkauf.
| Unternehmen | Zuschläge | Zeitraum |
|---|---|---|
| Andreas Eirich | 4 | 2025–2026 |
| LEOBERSDORFER MASCHINENFABRIK GMBH · 2544 AT | 4 | 2025–2026 |
| Kiese und Sande Ostsee GmbH | 4 | 2024–2025 |
| E&H Ellermann GmbH · Niedenstein | 3 | 2026 |
| RMA Rheinau GmbH & Co. | 3 | 2025 |
Aus den erfassten Zuschlägen · wer regelmäßig gewinnt, kennt die Anforderungen dieses Auftraggebers — das ist Ihr Wettbewerb.
·
Frist — Donnerstag, 19. November um 12:00
Frist für Teilnahmeanträge
Taktik
Wenn in diesem Land und dieser Branche vergeben wurde, gingen meist nur ein bis zwei Angebote ein. Ein solides Angebot hat hier echte Chancen. (Erfahrungswert aus 104 abgeschlossenen Vergaben — keine Aussage über dieses Verfahren.)
Dieses Verfahren gibt 31 Tage zwischen Veröffentlichung und Frist — üblich in Deutschland sind 32 (Mittel aus 20.496 Verfahren). Ein normales Fenster für diesen Markt.
Bieter aus dem Ausland
In Deutschland gingen 6.022 Aufträge der letzten 3 Jahre an ausländische Firmen (von 725.088 erfassten Vergaben) — vor allem aus Österreich, Polen, Italien.
Angebotssprache: Deutsch, Englisch.
Gemessen an verknüpften Vergabedaten; ausländische Gewinner mit inländischer Tochtergesellschaft zählen als Inländer — die echte Quote liegt höher.
So bewerben Sie sich
Anleitung: So bewerben Sie sich auf cosinex Vergabemarktplatz / DTVP → Registrierung, Signatur, Gebühren — aus dem Bieterhandbuch des Betreibers.
Ganze Bekanntmachung lesen — Original + Unterlagen
Führt direkt zu dieser Ausschreibung auf TED — Tenders Electronic Daily. Dort stehen die vollständige Leistungsbeschreibung und alle Anlagen.
Dieses Verfahren ist auf 2 Portalen veröffentlicht
Alle bekannten Quellen sind Bekanntmachungsdienste. Die Abgabestelle nennt der Auftraggeber in der Bekanntmachung selbst.
TEDBekanntmachungÖffentliche Vergabe (Datenservice)Bekanntmachung
Nachweise zusammenstellen — in Deutsch, Englisch
Die 14 Kriterien links, dazu Ihr Preis.
Abgabe über TED — Tenders Electronic Daily vor Fristablauf
Elektronische Abgabe — beim ersten Mal Zeit für die Portal-Registrierung einplanen.
Wir holen Daten aus Millionen Bekanntmachungen. Falls der Link hier nicht funktioniert, melden Sie es — wir kümmern uns darum, den richtigen zu finden.
Die nächste nicht verpassen
Solche Ausschreibungen schickt Friedrich jeden Morgen um 7:30 Uhr als KI-geprüfte Auswahl — Claude von Anthropic prüft, ob sie zur Firma passen, und lernt aus jeder Rückmeldung.
Jetzt registrieren