Friedrich & ClementBETA

Jak składać oferty w tym kraju: platformy, terminy, progi →

Ili hyrer/hyrel

DENiemcy · Kassel

Państwa droga do złożenia oferty

  1. Termin składania wniosków o dopuszczenie do udziału: 19 listopada 12:00 — zostało 18 dni. Postępowanie dwuetapowe: do tego terminu składa się wniosek o dopuszczenie do udziału (dokumenty potwierdzające spełnienie warunków). Ofertę składają tylko wykonawcy zaproszeni po kwalifikacji.
  2. Miejsce składania wskazano w ogłoszeniu (link na tej stronie).
  3. Oferta i dokumenty w języku: niemiecki, angielski.
  4. Proszę skompletować dokumenty i skorzystać z analizy na tej stronie: wymienia warunki, a przy znanych zaświadczeniach drogę ich uzyskania.
Zestawione automatycznie z ogłoszenia i dokumentacji — bez gwarancji; wiążące jest brzmienie postępowania.

Czego szuka zamawiający

Celem projektu jest Inspekcja In-Line (ILI) do oceny stanu technicznego gazociągu przed przejściem z eksploatacji gazu ziemnego (NG) na eksploatację wodoru. · W przypadku odcinków rurociągu 1 do 3 bierze się pod uwagę czyszczenie mechaniczne z wykorzystaniem np. dwukierunkowego czyszczenia świń. Zakłada się, że na każdy odcinek rurociągu wymagane są cztery (4) wybiegi dla świń czyszczących. W przypadku pierwszego przejazdu świń czyszczących na sekcję musi być oferowana dwukierunkowa świnia, która musi potwierdzać przejście świni za pomocą mechanicznej lub inteligentnej tabliczki pomiarowej. · W przypadku odcinków gazociągu 1 do 3 mapowanie rurociągu rozważa się na całym odcinku lub na określonym jego podsekcji. Należy zapewnić co najmniej dwadzieścia (20) AGM na sekcję. Inercyjne dane pomiarowe są brane pod uwagę przy analizie odkształcenia gięcia, która jest oferowana jako usługa…

Pokaż pełny opis

… łączona. W odniesieniu do odcinków gazociągów 1–3 technologie ILI uwzględniają następujące anomalie rurociągów: · Oferowane usługi uwzględniają wewnętrzne i zewnętrzne wykrywanie utraty metalu i wymiarowanie w prostych rurach, belkach polowych i gorących. W przypadku połączenia technologii ILI wdrożonych na co najmniej jednym narzędziu ILI, które umożliwia łączoną analizę danych prowadzącą do lepszej perforacji w porównaniu z poszczególnymi technologiami ILI, technologie te są oferowane jako usługa łączona i jako takie są podkreślane. · Oferowane usługi powinny uwzględniać wykrywanie i wymiarowanie geometrycznych odchyleń od normy prostej rury i zakrętów. Oferowane usługi uwzględniają wykrywanie i dobór wielkości zorientowanych osiowo pęknięć i anomalii podobnych do pęknięć. Definicja terminów jest zgodna z publicznie dostępną zalecaną praktyką Forum Operatorów Rurociągów POF 100 edition 2021. · Oferowane usługi uwzględniają wykrywanie i dobór miejscowych zmian twardości materialnej rury w odniesieniu do średniej twardości materiału na złącze oraz przekroczenie górnego i dolnego progu w zależności od oferowanej wydajności narzędzia. · Oferowane usługi uwzględniają wykrywanie zmienności wytrzymałości plastyczności materiału rury na złącze w odniesieniu do dostępnych zapisów materiału rury na złącze. · Oferowane usługi uwzględniają pomiar obciążenia osiowego na całej długości przekroju. Usługa jest oferowana jako połączona usługa ILI, oparta na odkształceniu ocena sprawności dla usługi oraz, w miarę możliwości, całkowita ocena odkształcenia, w tym wyniki oceny odkształcenia zginającego (zob. część 2). Próbki rur i dane próbek rur mogą być dostarczane z góry, jeśli to konieczne, aby zwiększyć oferowaną wydajność.

Tłumaczenie maszynowe (eTranslation UE) — oficjalna treść przez link PDF.

Zamówienie

RodzajUsługi
Wartość szacunkowawartość nieopublikowana
Opublikowano20 paź 2026
TrybNegocjacje z ogłoszeniem
części: 16Zastrzeżone dla MŚP

Rodzaj zamówienia

76 · Usługi dla sektora naftowego i gazowego
CPV 76600000

Clement Co liczby mówią o tym zamawiającym

  • 47% zamówień tego zamawiającego trafiło do firm, które już wcześniej tu wygrały (52 zamówień od 2024, rozłożonych na 28 firm). 53% trafiło do nowych firm.n = 52 udzielonych zamówień od 2024
  • Mediana: 2 ofert na postępowanie (40 postępowań z liczbą ofert); w 45% został jeden oferent. Branża: mediana 2 oferty.n = 40
  • 2% zamówień trafiło do firm z zagranicy (52 zamówień ze znanym krajem wykonawcy). Średnia branżowa: 6%.n = 52
  • W 11 postępowaniach z ustrukturyzowanymi warunkami udziału zamawiający najczęściej wymagał: Wpis do rejestru handlowego (9 z 11), Ubezpieczenie OC zawodowej (7 z 11), Referencje: usługi (6 z 11), Średni minimalny roczny obrót (6 z 11).n = 11
  • Od ogłoszenia do udzielenia zamówienia mija tu w medianie 61 dni (11 postępowań).n = 11

Na podstawie udokumentowanych zamówień tego zamawiającego; wartości porównawcze z tej samej branży i kraju. To nie prognoza ani porada prawna. Stan na 01.11.2026.

Clement
W porównywalnych zamówieniach tej branży w kraju (104 ze znaną liczbą ofert) wpływały zwykle tylko 2 oferty — solidna oferta ma realne szanse.
Referencje i zaświadczenia z Państwa kraju liczą się w całej UE pełnoprawnie — po to jest europejskie prawo zamówień.

Co należy wykazać — warunki udziału

›
Wpis do rejestru handlowego
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverifi… czytaj całośćzwiń
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverified copy), provided that the tenderer is registered in the professional or commercial register. In case of non-registration: The submission of a business registration (for foreign tenderers: or equivalent). The proof must identify at least the persons authorized to represent the company. The proof may be submitted in (non-certified) photocopy/photocopy (PDF), but must be clearly legible and formulated in German or English (if necessary, translated). The proof must not be older than 12 months at the time of publication of this announce-ment. Refer to Attachment A.1 Forms and Proofs (Suitability), Proof 1.
›
Wpis do rejestru handlowego
PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB … czytaj całośćzwiń
PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB is possible. See Attachment A.1 Forms and Certificates (Suitability), Form 3.1 (or Form 3.2).
›
Wpis do rejestru handlowego
PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). - PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). See Attachment A.1 Forms and Certificates (Suitability), Form 8.
›
Wpis do rejestru handlowego
PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. - PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. See Attachment A.1 Forms and Certificates (Suitability), Form 9 (or Form 10).
›
Minimalny obrót w zakresie zamówienia
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a compan… czytaj całośćzwiń
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a company has not been active on the market for three years, it shall provide a business plan for the missing years, stating the expected annual revenue. Minimum requirement (failure to meet will result in exclusion): The annual revenue in EUR (net) for each of the last 3 (three) completed fi-nancial years, broken down by lot, must be for Lot 1, at least 480.000,00 EUR. for Lot 2, at least 100.000,00 EUR. for Lot 3, at least 1.300.000,00 EUR. for Lot 4, at least 500.000,00 EUR. for Lot 5, at least 10.000.000,00 EUR. for Lot 6, at least 900.000,00 EUR. for Lot 7, at least 700.000,00 EUR. for Lot 8, at least 900.000,00 EUR. for Lot 9, at least 160.000,00 EUR. for Lot 10, at least 50.000,00 EUR. for Lot 11, at least 200.000,00 EUR. for Lot 12, at least 150.000,00 EUR. for Lot 13, at least 1.000.000,00 EUR. for Lot 14, at least 220.000,00 EUR. for Lot 15, at least 160.000,00 EUR. for Lot 16, at least 220.000,00 EUR. If the applicant wishes to submit a tender for several lots, the minimum requirements must be met cumulatively. This means that, for a tender covering all 16 lots, evidence of an annual revenue of EUR 17.040.000,00 (net) must be provided for each of the last three (3) completed financial years. Refer to Attachment A.1 Forms and Certificates (Suitability), Form 6.
›
Ubezpieczenie OC zawodowej
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standar… czytaj całośćzwiń
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standard insurance for personal injury, property and financial damages. Minimum requirement (failure to meet will result in exclusion): The amount of liability cover for personal injury, property damage and financial loss must be at least EUR 10 million per insurance year. If insurance with these coverage levels does not currently exist, it is sufficient to sub-mit 1. a self-declaration by the tenderer that it is prepared to take out ap-propriate insurance at the first request of the contracting entity in the event of a contract award and 2. an irrevocable declaration by an insurer (in non-verified copy) that it is willing to take out the corresponding insurance. The proof can be presented in photocopy/photocopy (PDF), but must be clearly legi-ble. The proof must not be older than 12 months at the time of the expiry of the dead-line for submitting offers. Refer to Attachment A.1 Forms and proof (suitability), Proof 2.
›
Referencje: usługi
TL1: References - TL1: Information on the performance of relevant and comparable services (refer-ences) in the last six (6) years since the publication of the announcement. The refer-ence must be comparable to the service to be contracted here in terms of type… czytaj całośćzwiń
TL1: References - TL1: Information on the performance of relevant and comparable services (refer-ences) in the last six (6) years since the publication of the announcement. The refer-ence must be comparable to the service to be contracted here in terms of type, scope and level of difficulty. To demonstrate comparability, references must contain at least the following infor-mation: 1. Reference title 2. Client (If the client may not be named for data protection reasons, it is sufficient to categorize the client (research, industry, other sectors of the contracting enti-ty) and to confirm that the reference is comparable to the tendered service.) 3. Contact person incl. contact details (e.g., e-mail, telephone number) (If the contact person may not be named for data protection reasons, it is suffi-cient to categorize the client (research, industry, other sectors client) and con-firm that the reference is comparable to the tendered service.) 4. Brief description of the ILI service(s) performed 5. Inspected pipeline section outer diameter 6. Nominal wall thickness 7. Seamweld type 8. Length 9. Pipeline medium 10. Medium flow conditions 11. Mean operating pressure during inspection 12. Order value in EUR (net) 13. Execution period Minimum requirement (failure to meet will result in exclusion): There are at least 2 relevant (comparable) references per Lot and ILI service. Refer to Attachment A.1 Forms and Certificates (Eligibility), Form 7.
›
Niezależny certyfikat jakości (np. ISO 9001)
TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent - TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent. Minimum requirement (failure to meet will result in exclusion): Proof of valid certificatio… czytaj całośćzwiń
TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent - TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent. Minimum requirement (failure to meet will result in exclusion): Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent must be submitted. Refer to Attachment A.1 Forms and Certificates (Eligibility), Proof 3.
›
Wpis do rejestru handlowego
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverifi… czytaj całośćzwiń
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverified copy), provided that the tenderer is registered in the professional or commercial register. In case of non-registration: The submission of a business registration (for foreign tenderers: or equivalent). The proof must identify at least the persons authorized to represent the company. The proof may be submitted in (non-certified) photocopy/photocopy (PDF), but must be clearly legible and formulated in German or English (if necessary, translated). The proof must not be older than 12 months at the time of publication of this announce-ment. Refer to Attachment A.1 Forms and Proofs (Suitability), Proof 1.
›
Wpis do rejestru handlowego
PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB … czytaj całośćzwiń
PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB is possible. See Attachment A.1 Forms and Certificates (Suitability), Form 3.1 (or Form 3.2).
›
Wpis do rejestru handlowego
PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). - PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). See Attachment A.1 Forms and Certificates (Suitability), Form 8.
›
Wpis do rejestru handlowego
PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. - PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. See Attachment A.1 Forms and Certificates (Suitability), Form 9 (or Form 10).
›
Minimalny obrót w zakresie zamówienia
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a compan… czytaj całośćzwiń
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a company has not been active on the market for three years, it shall provide a business plan for the missing years, stating the expected annual revenue. Minimum requirement (failure to meet will result in exclusion): The annual revenue in EUR (net) for each of the last 3 (three) completed fi-nancial years, broken down by lot, must be for Lot 1, at least 480.000,00 EUR. for Lot 2, at least 100.000,00 EUR. for Lot 3, at least 1.300.000,00 EUR. for Lot 4, at least 500.000,00 EUR. for Lot 5, at least 10.000.000,00 EUR. for Lot 6, at least 900.000,00 EUR. for Lot 7, at least 700.000,00 EUR. for Lot 8, at least 900.000,00 EUR. for Lot 9, at least 160.000,00 EUR. for Lot 10, at least 50.000,00 EUR. for Lot 11, at least 200.000,00 EUR. for Lot 12, at least 150.000,00 EUR. for Lot 13, at least 1.000.000,00 EUR. for Lot 14, at least 220.000,00 EUR. for Lot 15, at least 160.000,00 EUR. for Lot 16, at least 220.000,00 EUR. If the applicant wishes to submit a tender for several lots, the minimum requirements must be met cumulatively. This means that, for a tender covering all 16 lots, evidence of an annual revenue of EUR 17.040.000,00 (net) must be provided for each of the last three (3) completed financial years. Refer to Attachment A.1 Forms and Certificates (Suitability), Form 6.
›
Ubezpieczenie OC zawodowej
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standar… czytaj całośćzwiń
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standard insurance for personal injury, property and financial damages. Minimum requirement (failure to meet will result in exclusion): The amount of liability cover for personal injury, property damage and financial loss must be at least EUR 10 million per insurance year. If insurance with these coverage levels does not currently exist, it is sufficient to sub-mit 1. a self-declaration by the tenderer that it is prepared to take out ap-propriate insurance at the first request of the contracting entity in the event of a contract award and 2. an irrevocable declaration by an insurer (in non-verified copy) that it is willing to take out the corresponding insurance. The proof can be presented in photocopy/photocopy (PDF), but must be clearly legi-ble. The proof must not be older than 12 months at the time of the expiry of the dead-line for submitting offers. Refer to Attachment A.1 Forms and proof (suitability), Proof 2.
Treści wymagań cytowane są w języku oryginału ogłoszenia — wiążące jest brzmienie urzędowe.

Dokumenty zamówienia — pobieranie bezpośrednie

⤓
Załącznik 1
Opis przedmiotu zamówienia i załączniki u zamawiającego — zwykle dostępne bez rejestracji
⤓
Warunki administracyjne
Pełne ogłoszenie, brzmienie urzędowe

Kto dotąd wygrywał u tego zamawiającego

Wszystkie rodzaje zamówień tego zamawiającego — nie tylko ta branża. Miasto kupuje oprogramowanie i wozy strażackie w tym samym dziale zamówień.

WykonawcaUdzielone zamówieniaOkres
Andreas Eirich42025–2026
LEOBERSDORFER MASCHINENFABRIK GMBH · 2544 AT42025–2026
Kiese und Sande Ostsee GmbH42024–2025
E&H Ellermann GmbH · Niedenstein32026
RMA Rheinau GmbH & Co.32025
Na podstawie zarejestrowanych udzieleń · stali zwycięzcy znają wymagania tego zamawiającego — to Państwa konkurencja.

Kontakt z zamawiającym

Strona internetowawww.gascade.de
·
Termin — czwartek, 19 listopada 12:00
Termin składania wniosków o dopuszczenie do udziału

Taktyka

Gdy udzielano zamówień w tym kraju i tej branży, zwykle wpływały tylko jedna lub dwie oferty. Solidna oferta ma tu realne szanse. (Na podstawie zakończonych udzieleń: 104 — nie dotyczy tego postępowania.)

To postępowanie daje 31 dni między publikacją a terminem — w tym kraju zwykle 32 (mediana z 20 496 postępowań). Typowy okres dla tego rynku.

Oferenci zagraniczni

W kategorii Niemcy firmy zagraniczne wygrały 6022 zamówienia w ciągu 3 lat (z 725 088 odnotowanych) — głównie: Austria, Polska, Włochy.

Język oferty: Niemiecki, Angielski.

Zmierzone na powiązanych danych o udzieleniach; zagraniczni zwycięzcy działający przez lokalną spółkę liczą się jako krajowi — realny udział jest wyższy.

Jak złożyć ofertę

Poradnik: jak złożyć ofertę na cosinex Vergabemarktplatz / DTVP → Rejestracja, podpis, opłaty — na podstawie podręcznika operatora.

Przeczytaj pełne ogłoszenie — Oryginał + dokumenty
Prowadzi bezpośrednio do tego postępowania na TED — Tenders Electronic Daily. Tam znajdą Państwo opis przedmiotu zamówienia i wszystkie załączniki.
To postępowanie opublikowano na platformach: 2
Wszystkie znane źródła to serwisy ogłoszeniowe. Miejsce składania ofert zamawiający podaje w samym ogłoszeniu.
Przygotować dokumenty — w języku: Niemiecki, Angielski
Kryteria po lewej (14), do tego Państwa cena.
Złożenie oferty przez TED — Tenders Electronic Daily przed terminem
Składanie elektroniczne — przy pierwszym razie proszę zaplanować czas na rejestrację na platformie.
Do platformy zakupowej →Ogłoszenie urzędowe w TED →
Pobieramy dane z milionów ogłoszeń. Jeśli ten link nie działa, prosimy o zgłoszenie — znajdziemy właściwy.

Proszę nie przegapić następnego

Friedrich znajduje takie przetargi dla Państwa — codziennie o 7:30, każdy sprawdzony przez Claude (Anthropic), i uczy się z Państwa opinii, czym naprawdę zajmuje się Państwa firma.

Zarejestruj się