Friedrich & ClementBETA

Cómo licitar en este país: plataformas, plazos, umbrales →

Sistema Dinàmic d'Adquisició de subministrament de materials i productes d'ús corrent per part de les diferents àrees de l'Ajuntament de Castelló

ESEspaña · CastellóPOR DEBAJO DEL UMBRAL — NO ESTÁ EN TED
Plazo inusualmente lejano. Así figura en el anuncio. Suele tratarse de un procedimiento de participación continua o de un acuerdo marco largo. Prevalece el texto del órgano de contratación: el enlace lleva a él.

Su camino hasta la presentación

  1. Plazo de presentación de solicitudes de participación: 30 de mayo de 2028 a las 14:00 — quedan 576 días. Procedimiento en dos fases: hasta este plazo se presenta la solicitud de participación (acreditación de solvencia). Solo las empresas seleccionadas son invitadas después a presentar oferta.
  2. La oferta se presenta en PLACSP — Plataforma de Contratación del Sector Público, no aquí ni por correo electrónico. ↗ La presentación se hace en la Plataforma de Contratación del Sector Público (PLACSP): alta como licitador y certificado digital reconocido o firma electrónica cualificada eIDAS. Resuélvalo con antelación, la obtención suele llevar varios días. Resuelva primero el alta y la firma electrónica, no el día de la presentación.
  3. Reúna la documentación acreditativa y use el análisis de solvencia de esta página: enumera los requisitos y, para los certificados conocidos, la vía de obtención.
Recopilado automáticamente a partir del anuncio de licitación y de los pliegos. Datos sin garantía; prevalece el tenor literal del procedimiento de contratación.

Contrato

TipoSuministros
Valor estimadono publicado — habitual en contratos por debajo de los umbrales
Publicado18 jul 2025
ProcedimientoProcedimiento restringido

Tipo de prestación

30 · Equipos de oficina e informáticos37 · Artículos musicales y deportivos39 · Mobiliario y equipamiento15 · Alimentación y bebidas
CPV 30100000 · 37000000 · 39800000 · 39700000 · 15900000 · 15000000 · 39200000

Clement Lo que dicen las cifras sobre este órgano de contratación

  • El 6 % de las adjudicaciones de este órgano de contratación recayó en empresas que ya habían ganado aquí antes (1667 adjudicaciones desde 2018, repartidas entre 827 empresas). Es bastante menos de lo habitual en el sector (62 %): este órgano de contratación cambia de proveedor más a menudo que los demás.n = 1667 adjudicaciones desde 2018
  • En este sector el órgano de contratación adjudica aproximadamente cada 2 meses (23 adjudicaciones, la última en mayo de 2026); a ese ritmo, la siguiente correspondía alrededor de julio de 2026. La última adjudicación recayó en AUTOSERVICIO L AGUSTINO S L U.n = 23
  • El procedimiento mediano reunió una sola oferta (1517 procedimientos con número de ofertas); en el 86 % se quedó en un único licitador. Sector: mediana de 3 ofertas.n = 1517
  • El 97 % de las ofertas presentadas procedía de pequeñas y medianas empresas (22 procedimientos con desglose de ofertas). Sector: 69 %.n = 22
  • La adjudicación se cerró en una mediana del 85 % del valor estimado (680 adjudicaciones con estimación e importe) — quien calcula sobre la estimación suele quedar aquí por encima. Sector: 77 %.n = 680

A partir de las adjudicaciones documentadas de este órgano de contratación; los valores de referencia proceden del mismo sector y del mismo país. Ni previsión ni asesoramiento jurídico. Datos a 01/11/2026.

Los pliegos de un vistazo

Lo esencial de los pliegos, contrastado frase a frase con los documentos. Para su oferta, cuentan los documentos originales.

Impulsado por eBriefing, tecnología lingüística de la UE. Friedrich es un servicio independiente, no una oferta de la UE.

✓ figura en los pliegos · ❓ no encontrado en los pliegos o indicación general · Disponible en inglés.

Dynamic Acquisition System of the Municipality of Castelló – Conditions for participation and contractual performance

The input text describes, from the perspective of the Spanish Public Administration (Municipality of Castelló, Spain), the establishment and operation of a Dynamic Acquisition System (DAS) for the supply of materials and products of current use.

It is based on Law 9/2017 on Public Sector Contracts (LCSP) and its regulations, and regulates both the access of companies to the system and the award and execution of specific supply contracts.

No other countries are mentioned except generic references to Community and non-Community companies that want to contract with the Spanish Administration.

Regarding what the tenderer must submit and the minimum requirements, the text establishes that interested companies must submit a "Request to participate" (About/File 1) in accordance with the model in Annex I, accompanied by a Responsible Declaration in accordance with the European Single Procurement Document (ESPD) according to Article 140 LCSP.

In addition, they must prove capacity to act (writing of constitution and statutes registered, DNI and registration in IAE, registration in foreign registers, etc.), specific professional authorization when appropriate, and be aware of tax obligations and with the Social Security, and the City Council can check it ex officio unless expressly opposed.

For economic solvency, annual turnover in the CPV domain of the category is required at least equal to the estimated annual value of that category; this is evidenced, for example, by standardised models of depositing accounts in the Commercial Register or inventory books/tax settlements.

For technical solvency, it is required to have made supplies of the same or similar nature in the last three years, indicating the amount, date and recipient, or quality control certificates for start-ups, accredited by customer certificates or responsible declaration.

It provides for the accumulation of solvency in joint ventures, the use of external means with commitment according to Article 75 LCSP and, as an important exception, the exemption from proving economic and technical solvency for supply contracts with an estimated value of less than € 35,000, both for access to the DPS and for the award of contracts based on it.

The overall estimated value of the system amounts, for example, to €464,270.45 net of VAT (€561,767.24 including VAT), broken down by category, which sets annual estimated values, such as €9,865.57 for stationery and office or €55,462.26 for food.

The minimum time limit for the submission of tenders in each based call for tenders is 10 days from the sending of the invitation (half-decreasable in urgent processing), while the time limit for submitting requests to participate in the DPS is 30 calendar days from the publication of the notice.

As regards award criteria and weighting, the specifications provide as a general rule for Option A, which consists of awarding the lowest price, with a maximum valuation of 100 points, to the minimum value tender, applying an inversely proportional formula Vi = (Omin/Oi)*100; if there is only one tenderer without a withdrawal, 50 points are awarded to him, and if he does not submit a withdrawal in competition, 0 points are awarded to him.

Mostrar las 21 indicaciones

Option B is also considered where the technical unit justifies other criteria: the price is valued with a maximum of 70 points (Vi = (Omin/Oi)*70) and up to 30 additional points are attributed to objective economic or qualitative criteria, always subject to automatic and detailed valuation with their weighting in the invitation.

As a tiebreaker criterion, it is indicated, for example, to value companies with social and labor measures that favor equal opportunities between women and men, or, in another section, to the bidders with the highest number and percentage of permanent workers with disabilities in the workforce; abnormally low tenders are defined in accordance with Article 149 LCSP and Article 85 RGLCAP (10-25% thresholds according to the number of tenderers).

It is a reason for exclusion to bid above the type of tender or with guarantee periods below the minimum.

As regards special risks and conditions, the DPS does not require a definitive guarantee for specific contracts, given that their individual estimated value is less than €15 000 net of VAT, and does not provide for price revisions.

As special conditions of execution, social obligations are emphasized (safety and health at work, application of the sectoral/territorial collective agreement, payment of wages, compliance with the commitments offered), environmental (minimize waste and ensure correct management), and fiscal transparency (declare and fully tax profits without illicit relations with tax havens).

As regards contradictions or corrections within the documents, the specification itself clarifies that, in the event of discrepancies between it and other contractual documents, the provisions of the tender specifications prevail.

There are apparent divergences in the required solvency: on the one hand, it is stated, given the contractual nature, that it is necessary to prove economic, financial and technical solvency with an annual turnover equal to or greater than the estimated annual value of the category; on the other hand, it is indicated that, in accordance with Articles 92 and 159.6.b LCSP and 11 RGLCAP, candidates are exempted from proving economic and technical solvency because the derived contracts do not exceed the threshold of the abbreviated simplified procedure, and additionally a specific exemption is established for supply contracts whose estimated value does not exceed € 35 000.

The applicable interpretation, taking into account the principle of prevalence of the specifications and the detail of the exemption clause, is that the solvency requirement governs as a general rule for access to the DPS and categories, but it is not required to prove it for those specific DPS supply contracts whose estimated value is ≤ € 35,000, a situation that coincides with the raison d'être of the system (expediting recurring small-value contracts).

Likewise, when formal defects are detected in electronic signatures or in the ESPD, the Contracting Bureau applies the anti-formalist principle and allows correction within five working days, tenders being valid once these defects have been corrected; therefore, the Bureau decisions in the minutes rectify and complete the strict application of the initial formal requirements.

Complete los datos de su empresa — le mostraremos si cumple los requisitos de volumen de negocio, seguro y referencias →

Solo son vinculantes los pliegos del órgano de contratación. Fecha: 20/10/2026

Clement
Para este procedimiento de contratación no necesita usted una sociedad mercantil: los empresarios individuales y los profesionales autónomos también pueden licitar (art. 19 Dir. 2014/24/UE). Cuenta la solvencia, no la forma jurídica. Más información en la guía →

Análisis de solvencia a partir de los pliegos

Quién ha ganado hasta ahora con este órgano

Todos los tipos de contrato de este órgano, no solo este sector. Un ayuntamiento compra software y camiones de bomberos en el mismo servicio de compras.

EmpresaAdjudicacionesPeriodo
Ferreteria La Clau62025–2026
AUTOSERVICI L’AGUSTINO, SLU52025–2026
Jordi Benetó Aranda52021–2026
TECHFRIENDLY SL42023–2024
LIMPIEZAS RAFAEL SÁNCHEZ SL42021–2025
Según las adjudicaciones registradas · quienes ganan con regularidad conocen los requisitos de este órgano: esa es su competencia.

Con qué frecuencia este órgano licita algo así

4
2024
15
2025
6
2026
25 procedimientos en esta categoría desde 2019. La contratación pública se repite: quien conoce el ritmo se prepara en lugar de reaccionar.
·
Plazo — martes, 30 de mayo de 2028, 14:00
Plazo de presentación de solicitudes de participación

Táctica

Cuando se adjudicaron contratos en este país y sector, solían llegar unas 3 ofertas. Una competencia normal en este mercado. (Según 5570 adjudicaciones concluidas; no es una afirmación sobre este procedimiento.)

Este procedimiento da 1047 días entre la publicación y el plazo; lo habitual en este país son 26 (mediana de 7730 procedimientos). Mucho más amplio de lo habitual: tiempo para una oferta cuidada en lugar de rápida.

Licitadores extranjeros

En España · Equipos de oficina e informáticos, 23 contratos de los últimos 3 años se adjudicaron a empresas extranjeras (de 28.086 adjudicaciones registradas) — sobre todo de Alemania, Italia, Francia.

Medido sobre datos de adjudicación vinculados; los adjudicatarios extranjeros que licitan a través de una filial nacional cuentan como nacionales, por lo que la proporción real es mayor.

Cómo presentar una oferta

Guía: cómo licitar en PLACSP — Plataforma de Contratación del Sector Público (Spanien) → Registro, firma, tasas: según el manual del operador.

Leer el anuncio completo — Original y documentación
Lleva directamente a esta licitación en PLACSP — Plataforma de Contratación del Sector Público. Allí están los pliegos y todos los anexos.
Reunir la documentación
Certificados, referencias y su precio, según el anuncio.
Presentación a través de PLACSP — Plataforma de Contratación del Sector Público antes del plazo
Presentación electrónica: la primera vez, reserve tiempo para el registro en la plataforma.
A la plataforma de contratación →
Recopilamos datos de millones de anuncios. Si el enlace no funciona, avísenos: nos ocupamos de encontrar el correcto.

No se pierda el próximo

Friedrich encuentra licitaciones como esta por usted — cada mañana a las 7:30, cada una revisada por Claude (Anthropic), y aprende de sus respuestas a qué se dedica de verdad su empresa.

Quiero recibirlas