Jak składać oferty w tym kraju: platformy, terminy, progi →
Dynamiczny system pozyskiwania materiałów zamiennych do rowerów i stacji usługi roweru publicznego BICIMAD (11 Kategorii)
Sistema dinámico de adquisición de materiales de repuesto para bicicletas y estaciones del servicio de bicicleta publica BICIMAD (11 Categorías) — tytuł oryginalny
Państwa droga do złożenia oferty
- Termin składania wniosków o dopuszczenie do udziału: 1 marca 2028 23:59 — zostało 487 dni. Postępowanie dwuetapowe: do tego terminu składa się wniosek o dopuszczenie do udziału (dokumenty potwierdzające spełnienie warunków). Ofertę składają tylko wykonawcy zaproszeni po kwalifikacji.
- Ofertę składają Państwo na PLACSP — Plataforma de Contratación del Sector Público — nie u nas i nie e-mailem. ↗ Składanie przez Plataforma de Contratación (PLACSP): rejestracja plus uznany certyfikat cyfrowy / podpis eIDAS — jako oferent z UE warto zadbać o to wcześnie, trwa to zwykle kilka dni. Konto i podpis proszę załatwić najpierw — nie w dniu składania.
- Proszę skompletować dokumenty i skorzystać z analizy na tej stronie: wymienia warunki, a przy znanych zaświadczeniach drogę ich uzyskania.
Zamówienie
Rodzaj zamówienia
Clement Co liczby mówią o tym zamawiającym
- W tej branży zamawiający udziela zamówień mniej więcej co 2 mies. (663 zamówień, ostatnio październik 2026) — kolejnego można się spodziewać około grudzień 2026. Ostatnie zamówienie otrzymała firma ARVAL SERVICE LEASE, S.A.U.n = 663
- 68% zamówień tego zamawiającego trafiło do firm, które już wcześniej tu wygrały (4095 zamówień od 2013, rozłożonych na 850 firm). 32% trafiło do nowych firm.n = 4095 udzielonych zamówień od 2013
- 43% złożonych ofert pochodziło od małych i średnich firm (603 postępowań ze strukturą ofert). Branża: 68%.n = 603
- Mediana: 2 ofert na postępowanie (2332 postępowań z liczbą ofert); w 29% został jeden oferent. Branża: mediana 2 oferty.n = 2332
- Cena zwycięskiej oferty wyniosła w medianie 80% wartości szacunkowej (1106 zamówień z szacunkiem i wartością) — kalkulacja na poziomie szacunku jest tu zwykle za wysoka. Branża: 82%.n = 1106
Na podstawie udokumentowanych zamówień tego zamawiającego; wartości porównawcze z tej samej branży i kraju. To nie prognoza ani porada prawna. Stan na 31.10.2026.
Dokumentacja przetargowa w skrócie
Najważniejsze z dokumentacji przetargowej, sprawdzone zdanie po zdaniu z dokumentami. Przy ofercie liczą się oryginalne dokumenty.
Napędzane przez eBriefing – technologia językowa UE. Friedrich jest niezależną usługą, a nie ofertą UE.
✓ potwierdzone w dokumentach · ❓ nie znaleziono w dokumentach lub informacja ogólna · Dostępne w języku: angielski.
Dynamic Purchasing System for BiciMAD Spare Parts (EMT Madrid)
The input text concerns a Spanish public procurement procedure by Empresa Municipal de Transportes de Madrid, S.A.
(EMT) for the BiciMAD public bicycle system.
It describes a Sistema Dinámico de Adquisición (Dynamic Purchasing System, SDA) for spare parts and materials for bicycles and stations, from the point of view of Spanish contracting law (Ley 9/2017 de Contratos del Sector Público) and municipal instructions of the Ayuntamiento de Madrid.
The country context is therefore Spain, with explicit references to Spanish legal provisions, the Platforma de Contratación del Sector Público and EMT’s internal procedures.
Such as in the general background, the SDA covers “materiales de repuesto para bicicletas y estaciones del servicio de bicicleta pública BICIMAD” divided into 11 categories (batteries, carenado, electronics, ferretería, llantas, motor, neumáticos, tornillería, transmisión, tren motriz, vinilo).
The overall contract is a supply contract (Tipo de contrato: Suministros, subtipo Adquisición) with an estimated value of 5,003,659.71 EUR and a base tender budget of 2,905,146.95 EUR (without VAT).
The execution period for the SDA is 2 years, from 01/03/2026 to 01/03/2028, with deliveries to the BiciMAD warehouse at the Centro de Operaciones Fuencarral in Madrid (Mauricio Legendre 40–42).
A detailed budget table distributes the base budget by year and by category, indicating the annual value and the quantities in euros per category.
Such as indicated for companies like GURPILAN, FERRETERÍA IBERMADRID or TRIDIMAGEN, bidders must submit: Anexo I (general declarations on capacity, prohibitions, group relations, foreign jurisdiction), Anexo II, Anexo X (declaración responsable de seguro de responsabilidad civil), and specific declarations of economic and technical solvency.
Economic solvency is evidenced by a declaración responsable on turnover (volumen anual de negocios) for the last three financial years, with a minimum amount per category (e.g. 422,208.27 EUR for Category 1 batteries, 105,931.50 EUR for Category 11 vinilo) and cumulative amounts when applying for several categories.
Technical solvency is evidenced by a declaration listing similar supplies in the last 3 years (import, date, recipient), supported by certificates from public entities or private clients, with minimum amounts per category (e.g. 197,030.53 EUR for Category 1, 4,845.65 EUR for Category 4, 118,927.46 EUR for Category 5, 212,851.33 EUR for Category 7).
For UTEs (joint ventures) each member must submit all required documents plus Anexo III (solidarity commitment) and Anexo IV (integración de solvencia con medios externos, joint responsibility).
Pokaż wszystkie (24)
Regarding award criteria and weighting, the input text makes clear that, for specific contracts under the SDA, EMT will apply a single award criterion: price.
Such as explained in the justification section (Art. 116.4.c LCSP), price is given a 100% weighting and evaluated by a linear formula: P_l = (O_b / O_l) × 100, where O_b is the lowest valid offer, O_l is the offer being evaluated, and P_l the points awarded.
This ensures proportional scoring based solely on the discount offered.
The CPV codes listed for the SDA give the technical scope (bicycles, motors, electrical equipment, adhesives, ferretería, transmission elements, etc.), while the public notice fragments for Category 11 (vinilo) show that the criteria of solvency defined in the PCG are also reflected in the electronic tender notice, although the notice text itself ambiguously labels solvency compliance as a “criterion” with a 100 weighting in the contracting platform.
As to risks and special conditions, the text outlines several obligations that create risk allocation for bidders.
Such as the compulsory future insurance: bidders must sign Anexo X committing, if awarded a specific contract, to take out and maintain a general civil liability insurance for third-party damage with a minimum coverage equal to the estimated value of the specific contract per claim and year.
Any deductible (“franquicia”) in the policy must be borne by the contractor, and EMT may recover deductible amounts either by direct payment, invoice deduction, or retention of the performance guarantee where applicable.
There is also a special environmental execution condition: the contractor must use materials and work systems that are environmentally friendly and protect health and safety.
Each individual requerimiento to bidders has its own 3-day deadline for clarifications and document completion via PLYCA, and contact is centralized through EMT’s phone number; no site visit or question deadline for the initial SDA admission is explicitly described in the excerpts.
On contradictions or corrections within the documents, the main apparent tension arises from how award criteria are displayed in the external platform versus the internal PCG.
Such as in the Category 11 notice, the Platform of Contracting shows “Cumplir los criterios de solvencias establecidos en el PCG: Otros – Ponderación 100” under “Criterios de adjudicación,” which could suggest solvency as an award criterion; however, the PCG and the internal memory (Memoria justificativa, page 14) clearly state that the only award criterion is price (100% weighting) and that solvency is a participation requirement, not a scored criterion.
Similarly, where bidder-specific requerimientos add clarifications (e.g. reminding that amounts must match the solvency tables on page 18 of the PCG, or that illegible documents must be replaced), these are corrections of incomplete submissions rather than changes to the underlying rules, and the governing statements remain those in the PCG and the approved memorum.
Wiążąca jest wyłącznie dokumentacja zamawiającego. Stan: 20.10.2026
Analiza warunków udziału z dokumentacji
Kto dotąd wygrywał u tego zamawiającego
Wszystkie rodzaje zamówień tego zamawiającego — nie tylko ta branża. Miasto kupuje oprogramowanie i wozy strażackie w tym samym dziale zamówień.
| Wykonawca | Udzielone zamówienia | Okres |
|---|---|---|
| CAR ET BUS MAINTENANCE IBÉRICA, S.L. | 154 | 2018–2026 |
| MERCAMBIOS, S.L. | 112 | 2018–2025 |
| ICAR DISTRIBUCIONES FERRETERAS S.L. · Valdemoro | 97 | 2023–2026 |
| DISA PENÍNSULA S.L.U. | 95 | 2024–2026 |
| GALP ENERGIA ESPAÑA S.A.U. | 91 | 2018–2023 |
Jak często ten zamawiający ogłasza takie zamówienia
Taktyka
Gdy ten zamawiający udzielał zamówień w tej branży, zwykle wpływały tylko jedna lub dwie oferty. Solidna oferta ma tu realne szanse. (Na podstawie zakończonych udzieleń: 199 — nie dotyczy tego postępowania.)
To postępowanie daje 731 dni między publikacją a terminem — w tym kraju zwykle 27 (mediana z 7300 postępowań). Znacznie dłużej niż zwykle — czas na staranną, a nie pośpieszną ofertę.
Oferenci zagraniczni
W kategorii Hiszpania · Pojazdy i środki transportu firmy zagraniczne wygrały 344 zamówienia w ciągu 3 lat (z 39 550 odnotowanych) — głównie: Włochy, Niemcy, Francja.
Jak złożyć ofertę
Poradnik: jak złożyć ofertę na PLACSP — Plataforma de Contratación del Sector Público (Spanien) → Rejestracja, podpis, opłaty — na podstawie podręcznika operatora.
Proszę nie przegapić następnego
Friedrich znajduje takie przetargi dla Państwa — codziennie o 7:30, każdy sprawdzony przez Claude (Anthropic), i uczy się z Państwa opinii, czym naprawdę zajmuje się Państwa firma.
Zarejestruj się