Supply, Installation and maintenance of a PEM Electrolyser for Hydrogen Production at JRC Ispra
Italia · Ispra (VA) · cómo licitar aquí →
Su camino hasta la presentación
- Plazo de presentación de ofertas: 1 de octubre a las 00:00 — quedan 14 días.
- El lugar de presentación consta en el anuncio de licitación (enlace a la derecha).
- Oferta y documentación acreditativa en: BUL, CES, DAN, DEU, ELL, ENG, SPA, EST, FIN, FRA, GLE, HRV, HUN, ITA, LIT, LAV, MLT, NLD, POL, POR, RON, SLK, SLV, SWE.
- Reúna la documentación acreditativa: los criterios de solvencia figuran más arriba en esta página y, para muchos de ellos, el análisis le indica cómo obtenerlos.
Clement Lo que dicen las cifras sobre este órgano de contratación
- El 51 % de las adjudicaciones recayó en empresas extranjeras (89 adjudicaciones con país del adjudicatario conocido). Media del sector: 2 %.n = 89
- El 17 % de las adjudicaciones de este órgano de contratación recayó en empresas que ya habían ganado aquí antes (89 adjudicaciones desde 2023, repartidas entre 73 empresas). El 83 % recayó en nombres nuevos.n = 89 adjudicaciones desde 2023
- La adjudicación se cerró en una mediana del 97 % del valor estimado (7 adjudicaciones con estimación e importe) — quien calcula sobre la estimación suele quedar aquí en el punto justo. Sector: 81 %.n = 7
- El procedimiento mediano reunió 3 ofertas (89 procedimientos con número de ofertas); en el 26 % se quedó en un único licitador. Sector: mediana de 2 ofertas.n = 89
- El 94 % de las ofertas presentadas procedía de otros países (10 procedimientos con desglose de ofertas), contando todos los licitadores y no solo a los adjudicatarios.n = 10
A partir de las adjudicaciones documentadas de este órgano de contratación; los valores de referencia proceden del mismo sector y del mismo país. Ni previsión ni asesoramiento jurídico. Datos a 13/09/2026.
Licitadores extranjeros
En Italia · Maquinaria industrial, 16 contratos de los últimos 3 años se adjudicaron a empresas extranjeras (de 1415 adjudicaciones registradas).
Concurrencia habitual: mediana de 1 (sobre 4 adjudicaciones).
Qué busca el órgano de contratación
El resumen en español está en preparación. La descripción oficial que figura debajo está en el idioma original (DE).
Ver la descripción original (DE)
The procurement entails the design, manufacturing, delivery, installation, and commissioning of a Proton Exchange Membrane (PEM) electrolysis system for hydrogen production at the JRC Ispra site. The core of the system is a 50 Nm3/h electrolyser (which must be upgradable to 100 Nm3/h) that delivers hydrogen at an outlet pressure of 30 barg. The main equipment will be delivered in a containerized/skid version divided into three specific areas: a control panel area with the AC/DC converter, a water purification unit, and an ATEXclassified area containing the stacks and gas purification treatment. In addition to the containerized unit, the scope of supply includes several external components: An MV/LV transformer A thermal management system (dry cooler) A lowpressure hydrogen storage system consisting of a cylinder rack at 30 bar with a total volume of 5 m3 A gas blender installed on the outlet piping after the storage Finally, the procurement includes a comprehensive service package covering the Factory Acceptance Test (FAT), Site Acceptance Test (SAT), ATEX verification, staff training, two years of spare parts, and a 3year maintenance contract. Reason for Purchasing The primary objective of this procurement is to produce green hydrogen by harnessing the renewable energy generated from the JRC Ispra site's internal photovoltaic (PV) plant. Currently, the site has a 1.35 MWp PV installation, which is planned to be expanded to 2 MWp and eventually 3 MWp in the future. Instead of using battery systems, the JRC intends to use the excess energy from this PV plant to power the electrolyser for selfconsumption. The hydrogen produced will then be blended into the natural gas pipeline (up to a 10% volume blend) to feed the site's cogenerators. A dedicated technical sizing analysis concluded that a modular 2x250 kW electrolyser is the optimal choice, as it offers the best compromise between the available PV power, the number of operating hours, and the demand from the cogenerators across current and future PV expansion scenarios
Criterios de solvencia — en los pliegos de la licitación
El órgano de contratación indica en el anuncio de licitación que los criterios de solvencia figuran en los pliegos (enlace a la derecha) y no en el formulario europeo. El análisis de documentos que aparece más abajo los extrae de ahí — oferta y documentación acreditativa en BUL, CES, DAN, DEU, ELL, ENG, SPA, EST, FIN, FRA, GLE, HRV, HUN, ITA, LIT, LAV, MLT, NLD, POL, POR, RON, SLK, SLV, SWE.
Contrato
Quién ha ganado aquí hasta ahora
| Empresa | Adjudicaciones | Periodo |
|---|---|---|
| AVL ITALIA SRL | 4 | 2025 |
| TECHNOLOGY NUCLEAR ELECTRONICS SRL | 3 | 2024–2025 |
| CAMPOVERDE SRL | 3 | 2024 |
| VVA MARKET RESEARCH SRL | 3 | 2023–2025 |
| TRANSNUBEL · BRUSSEL | 3 | 2024 |
Con qué frecuencia licita esto este órgano de contratación
Quien conoce el ritmo se prepara en lugar de reaccionar.