Development of project documentation for the construction of a municipal road from ul. Saperów Tczewskich to ul. Kilińskiego, including road lighting and drainage

… a continuation of the pedestrian path from section A-B should be designed to connect it to the existing pavement at the northern entrance of the city park. The planned road should be connected to the existing road network by intersections and ordinary exits. Pedestrian crossings in the required areas and road markings should also be designed. Due to the limitations in the width and area of the area belonging to the Contracting Authority, the investment described above will require obtaining a decision authorising the implementation of a road investment. Length of the A-B section about 350 m, length of the B-C section about 150 m, length of the C-D section about 390 m, total length about 890 m. For the whole task, one decision should be obtained for the implementation of the road investment. 3. Parameters for designed roads: • Technical class – D • Traffic category – KR1 • Number of lanes – 2 (per segment) A-B) • Na odc. B-C and C-D, possibly a two-way single-lane road 1) Regardless of the solutions presented in the above-mentioned concept, all road elements should be designed in accordance with the applicable regulations. The planned road should be connected to the existing road network by intersections or public exits. 2) The drainage method suggested by the Ordering Party is the drainage of rainwater to the designed rainwater sewer with drainage to the existing ditch or evaporation tank. The documentation should meet the requirements of the applicable legal regulations in this area. 3) The collisions of the planned road with the physical infrastructure equipment shall be resolved by designing the necessary spacers/reconstruction/protection of the infrastructure in consultation with the network managers (if any). 4) The scope also includes obtaining on behalf of the Ordering Party the necessary decisions, contracts and conditions in order to have the right to dispose of the land by the Ordering Party for construction purposes, as well as possible obtaining (if required by separate provisions) an environmental decision, water permit and obtaining the necessary arrangements and conditions for the implementation of the subject of the contract. 4. Range of road lighting: 1) Application to PGE to obtain the conditions for connection to the power grid or increase the power for the existing lighting connection at ul. Saperów Tczewskich 2) Development of design documentation for building and executive permits. 3) The location of the lighting network on the side of the pavement. 4) Lighting Construction Guidelines: a) - led luminaires with reactive power compensation, b) - aluminum poles, c) - astronomical clock control, d) - illuminance according to the norm for municipal roads. 5. Dehydration range: 1) Obtaining a water permit to drain rainwater. 2) Preparation of project documentation for the decision authorising the implementation of the road and executive investment. 6. Pedestrian string: 1) design a pedestrian path in accordance with applicable regulations, 2) width, location and type of surface to be agreed with the Ordering Party at the stage of conceptual design The Designer will be obliged to obtain on behalf of the Ordering Party the final and legal