Friedrich & ClementBETA

Soumissionner dans ce pays : portails, délais, seuils →

Passation de contrats pour les services de construction et d'assemblages métalliques

Contratación de los servicios de construcciones y montajes metálicos — titre original

ESEspagne · Cartes
Publié il y a plus d'un an (8 août 2025). Selon la source, la procédure est toujours ouverte. Vérifiez auprès de l'acheteur qu'elle est toujours en cours avant de remettre une offre.

Votre chemin vers le dépôt

  1. Date limite de réception des candidatures : 13 août 2027 à 23:59 — encore 286 jours. Procédure en deux étapes : avant cette date, vous déposez une candidature (justificatifs de capacité). Seuls les candidats retenus sont ensuite invités à remettre une offre.
  2. Le dépôt se fait sur PLACSP — Plataforma de Contratación del Sector Público — pas ici, pas par e-mail. ↗ Dépôt via la Plataforma de Contratación (PLACSP) : inscription plus certificat numérique reconnu / signature eIDAS — à préparer tôt, comptez plusieurs jours. Réglez compte et signature d'abord — pas le jour du dépôt.
  3. Réunissez vos justificatifs — utilisez l'analyse d'éligibilité sur cette page : elle liste les exigences et le chemin d'obtention des attestations connues.
Assemblé automatiquement depuis l'avis et le dossier — sans garantie ; seul le libellé du marché fait foi.

Marché

TypeServices
Montant estimé427 094 €
Publié le8 août 2025
ProcédureProcédure restreinte

Type de prestation

50 · Entretien & réparation
CPV 50800000

Clement Ce que les chiffres disent de cet acheteur

  • 100 % des offres reçues venaient d'autres pays (188 procédures avec répartition des offres) — tous les candidats, pas seulement les titulaires. Secteur : 2 %.n = 188
  • Dans ce secteur, l'acheteur attribue environ chaque mois (144 attributions, la dernière en octobre 2026) — la prochaine est attendue vers décembre 2026 à ce rythme. La dernière attribution est allée à VEOLIA SERVICIOS NORTE, SAU.n = 144
  • 51 % des attributions de cet acheteur sont allées à des entreprises qui avaient déjà gagné ici (784 attributions depuis 2018, réparties sur 336 entreprises). 49 % sont allées à de nouveaux noms.n = 784 attributions depuis 2018
  • En médiane, 2 offres par procédure (261 procédures avec nombre d'offres) ; 28 % se sont terminées avec un seul candidat. Secteur : 2 offres en médiane.n = 261
  • 77 % des offres reçues venaient de PME (188 procédures avec répartition des offres). Secteur : 59 %.n = 188

À partir des attributions documentées de cet acheteur ; valeurs de comparaison du même secteur et du même pays. Ni prévision, ni conseil juridique. Au 01/11/2026.

Le dossier de consultation en bref

L'essentiel du dossier de consultation, vérifié point par point dans les documents. Pour votre offre, seuls les documents originaux font foi.

Propulsé par eBriefing – technologie linguistique de l'UE. Friedrich est un service indépendant, pas une offre de l'UE.

✓ figure dans les documents · ❓ introuvable dans les documents ou indication générale · Disponible en anglais.

Contract for metallic constructions and assemblies for MARE S.A. (Cantabria, Spain)

The input text concerns a public procurement procedure in Spain launched by Medio Ambiente, Agua, Residuos y Energía de Cantabria, S.A.

(MARE S.A.), a regional public company of the Autonomous Community of Cantabria.

It is framed under EU public procurement rules (Directive 2014/24/EU) and advertised both on Spain’s Plataforma de Contratación del Sector Público and in the EU’s TED (DOUE).

The contract sets up a Sistema Dinámico de Adquisición (Dynamic Purchasing System – SDA) for services related to metallic constructions and assemblies on various environmental infrastructures in Cantabria.

The scope of the contract is described as services of “construcciones y montajes metálicos” (metal structures, roofs, enclosures and boilerwork) on installations owned by MARE or assigned to it.

These include, such as wastewater treatment plants (EDAR), pumping stations, transfer plants (PL.), and other facilities (e.g.

Vertedero de Meruelo, El Mazo, Hospitalillo).

The estimated contract value is 726,060.25 EUR (IVA excluded) with a base tender budget of 427,094.26 EUR (516,784.06 EUR with IVA) for an initial duration of two years, plus one possible one‑year extension, leading to a maximum execution budget of 640,641.39 EUR and a maximum contract value of 726,060.25 EUR including a 20% modification margin.

The period of execution is from 13/08/2025 to 13/08/2027, and the SDA is valid until 13/08/2027.

Regarding what bidders must submit and minimum qualification requirements, the text repeatedly refers to the Pliego de Cláusulas Administrativas (PCA), specifically clause 2.1.1 on “Presentación de las solicitudes de participación”.

The offer must be submitted electronically via PLACSP in a “Sobre de documentación administrativa” (administrative envelope) for the SDA, containing the documentation required there.

Solvency requirements are defined in the Memoria justificativa: such as economic and financial solvency requiring an annual turnover in the best of the last three closed financial years at least equal to 100% of the annualized maximum value of the SDA; and technical/professional solvency requiring that the bidder has performed, in the year of greatest activity in the last three years, services of similar nature for an amount at least 100% of that annualized maximum value.

Afficher les 52 éléments

Professional habilitation is specified: the bidder must provide certificates of registration in the Registro de Empresas Acreditadas (REA) and in the Registro de Establecimientos Industriales (REI), and any additional specific habilitation mentioned in the Documento de Condiciones Técnicas Particulares for each call under the SDA.

TED/PLACSP summary fields say “indicar ‘no aplica’” for solvency criteria, but immediately clarify that all required documentation is set out in PCA clause 2.1.1, so the practical rule is: follow the PCA/Memoria requirements, not the “no aplica” placeholders.

Award criteria and their weighting are defined as purely formula‑based and split between price and other quantifiable factors.

The main criterion is the economic offer, such as the percentage discount applied to the budget specified in the particular technical conditions of each individual call under the SDA.

For this price criterion, the general “Criterios de valoración” document states a minimum weighting of 80 points and a maximum of 100 points.

In addition, “Otros criterios” (other quantifiable criteria) may be defined in each specific call’s Documento de Condiciones Técnicas Particulares, with a possible range from 0 to 20 points.

The TED/PLACSP notices summarize this as 80% weighting for price and 20% for “Otros”, but the detailed internal document clarifies that exact formulas and points distribution will be set in each specific call, within those ranges.

On risks and special conditions, the documentation mentions several elements.

There is a definitive performance guarantee of 5% of the contract, as stated in the notices.

A specific “PCA Anexo d Régimen Penalizador” (penalty regime) exists, which will define penalties, although the detailed rules are not reproduced in the provided text.

Subcontracting is permitted partially, such as for non‑essential tasks, provided the subcontractor meets the same solvency and professional habilitation requirements; subcontracting of “partidas esenciales o críticas” is not allowed, and any prohibition will be detailed in the particular technical conditions of each call.

Bidders must indicate in their offer the part they intend to subcontract, in line with Cantabria’s social clauses decree (Decreto 75/2019).

Contract assignment (cession) is allowed with prior communication and authorization from MARE, provided the new contractor meets all required conditions.

Special social execution conditions apply: where necessary, the contractor should preferentially hire persons in situations of unemployment with difficulties of integration or at risk of social exclusion, and, if these conditions are not met, justify this and then provide specific occupational health and safety training to all employees assigned to the contract; this is expressly stated not to be an “obligación contractual esencial”.

There is a mention that invoices and payments will not be electronic (no e‑invoicing or e‑payment).

The SDA has a validity period until 13/08/2027; requests to participate are accepted until 18/09/2025 at 12:00, with opening of administrative envelopes on 19/09/2025 at 12:30 at MARE’s central offices in Cartes.

The text does not provide a specific question deadline or mandatory site visit, but indicates that all information and pliegos are available via PLACSP and MARE’s profile.

As for contradictions or corrections, there are a few apparent inconsistencies between summary fields and detailed internal documents, and the hierarchy of applicable statements needs to be clarified.

Such as: the TED/PLACSP fields for solvency state “Criterio de Solvencia Técnica‑Profesional: Otros – Indicar ‘no aplica’” and “Criterio de Solvencia Económica‑Financiera: Cifra anual de negocio – Indicar ‘no aplica’”, whereas the Memoria justificativa clearly requires substantial economic and technical solvency.

Similarly, the notices give fixed 80/20 weighting for price/other criteria, but the internal “Criterios de valoración” document says the price criterion will have between 80 and 100 points and other criteria between 0 and 20 points, with exact points set in each call’s Documento de Condiciones Técnicas Particulares; again, the internal criteria document governs, within the framework that price is dominant and other formula‑based criteria are secondary.

Where dates differ in formulation (e.g.

Answers on the required criteria

Must securities be provided (bid bond, performance or warranty guarantee)? If so: which, in what amount and by when?

Such as regards securities, the contract documentation explicitly states “Garantía Requerida Definitiva Porcentaje 5 %”, meaning a definitive performance guarantee equal to 5% of the contract amount is required.

There is no mention in the extracted text of a separate bid bond or warranty guarantee beyond this definitive guarantee.

The exact timing (i.e. by when the guarantee must be constituted) is not specified in the excerpts and is referred generally to the Pliego de Cláusulas Administrativas (PCA), which must be consulted for details on submission deadlines and modalities of the performance bond.

Is subcontracting allowed? If so: with which limits and which disclosure duties?

Such as subcontracting, the “Memoria justificativa” includes a dedicated section 10 “Subcontratación” stating that the adjudicatario (contractor) may subcontract part of the service to third parties provided that the subcontractor meets the same solvency and specific professional qualification requirements as the bidders.

It also specifies that essential or critical parts of the contract may not be subcontracted and must be executed directly by the main contractor; which specific tasks are deemed essential will be defined in the Documento de Condiciones Técnicas Particulares for each individual contract under the SDA.

It is explicitly mandatory for bidders to indicate in their offer which part of the contract they intend to subcontract, in line with Article 47 of Decree 75/2019 of Cantabria on social clauses in public procurement.

Is there a site visit, and is attendance mandatory? If so: when?

Such as site visits, the text lists “Lugar Oficinas centrales de MARE” and the date and time for “Apertura sobre administrativo” (opening of the administrative envelope) and other events, marked as “Tipo de Acto: Privado”.

However, there is no reference to any “visita a las instalaciones” or site visit, nor any indication that a visit is planned or mandatory.

Therefore, based on the provided text, no site visit requirement or attendance obligation is specified; if such a requirement exists, it would have to be detailed in the technical specifications (PPT) or the particular conditions of each specific call under the SDA, which are not fully reproduced here.

In which language must the tender and the supporting documents be submitted, and are documents in other languages accepted?

Such as the language of submission, the documents and notices are entirely in Spanish and refer to Spanish legal instruments and the Spanish public procurement platform (Plataforma de Contratación del Sector Público, PLACSP).

The excerpts do not explicitly state “el idioma de la oferta será el castellano” or similar, nor do they mention acceptance of documents in other languages.

Under Spanish practice, the default is that tenders and supporting documents must be in Spanish, and any acceptance of other languages or requirement for translations would normally be indicated in the PCA or technical specifications, but this is not spelled out in the text provided.

How long is the bidder bound by the tender (validity period), and is there a deadline for bidder questions? If so: until when?

Such as tender validity and deadlines for bidder questions, the excerpts give several time-related elements: overall contract duration of two years with possible one-year extension; the SDA validity until 13/08/2027; and the deadline for “Recepción de Solicitudes de Participación” (applications to join the SDA) of 18/09/2025 at 12:00, as well as the date for opening the administrative envelope (19/09/2025 at 12:30).

However, there is no explicit clause on how long bidders are bound by their tenders (offer validity period) and no clear deadline for asking questions or requesting clarifications in the available text.

These aspects are repeatedly said to be “según lo dispuesto en el pliego” (according to what is set out in the PCA), so they must be obtained directly from the Pliego de Cláusulas Administrativas for this procedure.

Further details

Services contract for metallic constructions and assemblies under a dynamic purchasing system (SDA) in Cantabria, Spain

The input text concerns a Spanish public procurement procedure for “Servicios de construcciones y montajes metálicos” (services of metallic constructions and assemblies) promoted by Medio Ambiente, Agua, Residuos y Energía de Cantabria, S.A.

(MARE S.A.), a regional public company in Cantabria, Spain.

It describes a services contract (maintenance and repair) tendered via a restricted procedure linked to a Sistema Dinámico de Adquisición (SDA, dynamic purchasing system) and refers repeatedly to Spanish law and Cantabrian regional regulations, so the point of view is clearly that of Spanish public procurement rules.

Complétez les informations de votre entreprise — nous indiquerons si vous remplissez les exigences de chiffre d'affaires, d'assurance et de références →

Seuls les documents de l'acheteur font foi. Mis à jour: 17/10/2026

Clement
Sur les 23 derniers marchés comparables de cet acheteur (même secteur), seulement 2 offres arrivaient en général — une offre solide a de vraies chances.
Vos références et attestations nationales comptent pleinement dans toute l'UE — c'est le sens du droit européen des marchés.

Analyse d'éligibilité à partir du dossier

Qui a déjà gagné chez cet acheteur

Tous types de marchés de cet acheteur confondus — pas seulement ce secteur. Une ville achète logiciels et véhicules d'incendie au même service achats.

EntrepriseAttributionsPériode
SUMINISTROS MENDATA S.L.222020–2026
SULZER PUMPS WASTEWATER SPAIN, S.A.192021–2026
METALTRES PEFERLUI, S.L.182023–2026
GRUPO ANSAREO AEB S.L.152021–2026
Seidor Tech, S.A.152022–2026
D'après les attributions recensées · les lauréats réguliers connaissent les exigences de cet acheteur — c'est votre concurrence.

À quelle fréquence cet acheteur lance ce type de marché

2
2020
26
2023
48
2024
23
2025
42
2026
141 procédures dans cette catégorie depuis 2019. La commande publique se répète — qui connaît le rythme se prépare au lieu de réagir.
·
Date limite — vendredi 13 août 2027 à 23:59
Date limite de réception des candidatures

Tactique

Lorsque cet acheteur a attribué des marchés dans ce secteur, il n'arrivait le plus souvent qu'une ou deux offres. Une offre solide a ici de vraies chances. (D'après 23 attributions terminées — aucune indication sur cette procédure.)

Cette procédure laisse 736 jours entre la publication et la date limite — l'usage dans ce pays est de 26 (médiane de 7 730 procédures). Nettement plus long que d'habitude — le temps d'une offre soignée plutôt que rapide.

Soumissionnaires étrangers

En Espagne · Entretien & réparation, 245 marchés ont été remportés par des entreprises étrangères sur 3 ans (sur 44 349 attributions recensées) — principalement : Allemagne, Italie, Portugal.

Mesuré sur les attributions liées ; un lauréat étranger passant par une filiale locale compte comme national — la part réelle est plus élevée.

Comment candidater

Guide : comment candidater sur PLACSP — Plataforma de Contratación del Sector Público (Spanien) → Inscription, signature, frais — d'après le manuel de l'opérateur.

Lire l'avis complet — Original + documents
Mène directement à cette procédure sur PLACSP — Plataforma de Contratación del Sector Público. Le cahier des charges et toutes les annexes s'y trouvent.
Réunir les justificatifs
Certificats, références et votre prix — selon l'avis.
Dépôt via PLACSP — Plataforma de Contratación del Sector Público avant la date limite
Dépôt électronique — prévoyez du temps pour l'inscription au portail la première fois.
Vers le portail →
Nous collectons des millions d’avis. Si le lien ne fonctionne pas, signalez-le — nous trouverons le bon.

Ne manquez pas le prochain

Friedrich trouve des marchés comme celui-ci pour vous — chaque matin à 7 h 30, chacun vérifié par Claude (Anthropic), et il apprend de vos retours ce que fait vraiment votre entreprise.

S'inscrire maintenant