Soumissionner dans ce pays : portails, délais, seuils →
Fourniture de profilés métalliques et pièces en acier
Suministro de perfilería metálica y piezas de acero — titre original
Votre chemin vers le dépôt
- Date limite de réception des candidatures : 6 février 2028 à 12:00 — encore 462 jours. Procédure en deux étapes : avant cette date, vous déposez une candidature (justificatifs de capacité). Seuls les candidats retenus sont ensuite invités à remettre une offre.
- Le dépôt se fait sur PLACSP — Plataforma de Contratación del Sector Público — pas ici, pas par e-mail. ↗ Dépôt via la Plataforma de Contratación (PLACSP) : inscription plus certificat numérique reconnu / signature eIDAS — à préparer tôt, comptez plusieurs jours. Réglez compte et signature d'abord — pas le jour du dépôt.
- Réunissez vos justificatifs — utilisez l'analyse d'éligibilité sur cette page : elle liste les exigences et le chemin d'obtention des attestations connues.
Marché
Type de prestation
Clement Ce que les chiffres disent de cet acheteur
- 100 % des offres reçues venaient d'autres pays (188 procédures avec répartition des offres) — tous les candidats, pas seulement les titulaires. Secteur : 1 %.n = 188
- Dans ce secteur, l'acheteur attribue environ tous les 2 mois (56 attributions, la dernière en août 2026) — à ce rythme, la prochaine était attendue vers octobre 2026. La dernière attribution est allée à ANCARIA SL.n = 56
- 51 % des attributions de cet acheteur sont allées à des entreprises qui avaient déjà gagné ici (784 attributions depuis 2018, réparties sur 336 entreprises). 49 % sont allées à de nouveaux noms.n = 784 attributions depuis 2018
- En médiane, 2 offres par procédure (261 procédures avec nombre d'offres) ; 28 % se sont terminées avec un seul candidat. Secteur : 3 offres en médiane.n = 261
- L'attribution s'est faite en médiane à 78 % de la valeur estimée (400 attributions avec estimation et montant) — calculer sur l'estimation est ici le plus souvent trop haut. Secteur : 80 %.n = 400
À partir des attributions documentées de cet acheteur ; valeurs de comparaison du même secteur et du même pays. Ni prévision, ni conseil juridique. Au 01/11/2026.
Le dossier de consultation en bref
L'essentiel du dossier de consultation, vérifié point par point dans les documents. Pour votre offre, seuls les documents originaux font foi.
Propulsé par eBriefing – technologie linguistique de l'UE. Friedrich est un service indépendant, pas une offre de l'UE.
✓ figure dans les documents · ❓ introuvable dans les documents ou indication générale · Disponible en anglais.
Contract overview: Sistema Dinámico de Adquisición for steel profiles and metal parts (MARE, Cantabria)
The input text concerns a public procurement procedure in Spain, specifically by MEDIO AMBIENTE, AGUA, RESIDUOS Y ENERGÍA DE CANTABRIA, S.A., M.P.
(MARE), for the “Suministro de perfilería metálica y piezas de acero” under a Sistema Dinámico de Adquisición (SDA) using a restricted procedure.
The point of view is Spanish public-sector contracting under the Ley de Contratos del Sector Público (LCSP), with references to national entities, Cantabria as the place of performance, and Spanish oversight bodies such as the Tribunal Administrativo Central de Recursos Contractuales.
As background, the contract’s object is the supply of steel and metal profiles for maintenance works (such as welding and cutting) on structures and fixed equipment at MARE’s facilities (El Mazo recovery centre, EDAR Vuelta Ostrera, EDAR San Pantaleón, and other installations of MARE in Cantabria).
The procurement is organized as an SDA: first, companies apply for admission to the system; later, specific needs are tendered as individual “licitaciones” under that SDA, each with its own Documento de Condiciones Técnicas Particulares.
The general framework is set by the Memoria justificativa, the Acuerdo de inicio de expediente, the documents on term, budget and value, and the general criteria of valuation.
Regarding what the bidder must submit and minimum qualification, the texts describe an initial “Sobre Solicitud de participación en el SDA” with a standardized application form and a “declaración responsable” in the model of Annex B of the Pliego de Cláusulas Administrativas (PCA), in line with LCSP article 140.1.
The Documento Europeo Único de Contratación (DEUC) must be presented (as illustrated by SUMINISTROS MENDATA’s subsanation) and can be required/checked at admission and again before award for the top-ranked bidder.
Solvency requirements are defined in the Memoria justificativa: economic/financial solvency via annual turnover in the year of highest turnover over the last three years, at least 100% of the annualised “valor máximo del sistema dinámico de adquisición”; technical/professional solvency via executed annual volume of similar supplies in that same period, also at least 100% of the annualised value.
For “empresas de nueva creación” (less than five years old), solvency can instead be proved through a professional liability insurance policy for an amount equal or greater than the annualised maximum value (economic solvency) and by indicating technical staff or technical units (technical solvency).
There is also a specific form “CERTIFICADO DE VIGENCIA Y COBERTURA DE PÓLIZA DE SEGURO” to be filled by the insurer or broker as proof of insurance coverage.
Afficher les 41 éléments
In the Plataforma de Contratación notice, solvency documentation is marked “no aplica” at the initial stage and will be requested from the best-ranked bidder before award, in accordance with LCSP articles 140 and 150.2.
On the scope of the contract (what, how much, where, when), the object is strictly the supply (contract type: suministro) of metallic profiles and steel pieces, not their installation or fabrication by MARE.
Based on historical data, annual needs amount to 30,500 EUR without VAT (El Mazo 10,500 EUR, Vuelta Ostrera 10,000 EUR, San Pantaleón 10,000 EUR).
The Presupuesto Base de Licitación (PBL) for the initial two-year term is 61,000 EUR net (73,810 EUR with 21% VAT).
The value structure includes possible prórrogas (extensions) of two additional one-year periods for another 61,000 EUR (PME 122,000 EUR), plus a 20% modification margin (12,200 EUR) to cover potential increases in quantities, giving a Valor Máximo del Contrato (VMC) of 134,000 EUR (the Acuerdo de inicio uses 134,200 EUR, see contradictions below).
The execution takes place in Cantabria (subentidad territorial ES130, Spain), at MARE’s installations, and the overall SDA validity is two years from the day after the publication of the initial notice (05/02/2024–05/02/2026), with up to two one-year extensions possible.
A subsequent document announces a specific prórroga of one year (05/02/2026–05/02/2027) with a value of 30,500 EUR net for the SDA.
The Plataforma notice shows a “Plazo de Ejecución” from 06/02/2024 to 06/02/2028 with an observation “DOS (2) AÑOS, CON POSIBILIDAD DE DOS PRÓRROGAS ANUALES”, which reflects the base term plus two one‑year extensions.
Concerning award criteria and weighting, the procedure is defined as a restricted SDA with multiple criteria (though all are quantitative and formula-based).
The general “Criterios de valoración” document sets: (1) an economic criterion “Oferta económica – Precio” measuring the percentage discount offered on the PBL of each specific tender; this criterion has a minimum score of 80 and a maximum of 100 points.
(2) “Otros criterios” (also quantitative), with minimum 0 and maximum 20 points.
The detailed formulas for both are to be defined in each individual Documento de Condiciones Técnicas Particulares for each SDA-based tender.
The number of bidders to be invited in each tender is limited with a minimum of five.
The Tribunal Administrativo Central de Recursos Contractuales is identified as the body for appeals, and there is no EU co‑financing.
On risks and special conditions, the texts mention several aspects but not detailed penalty tables.
Subcontracting is allowed for partial execution of the supply, provided the subcontractor meets the same solvency and professional habilitation requirements as the main bidder; however, “partidas esenciales o críticas” cannot be subcontracted and must be executed by the adjudicatario.
Such essential items will be specified, if relevant, in each Documento de Condiciones Técnicas Particulares.
It is mandatory for bidders to indicate in their offer the part of the contract they intend to subcontract, in line with Cantabria’s Decreto 75/2019 on social clauses.
Contract assignment (cesión del contrato) is permitted, but only with prior communication and authorisation by MARE, and only to third parties that meet all requirements of the technical specifications and administrative terms.
Environmental special conditions apply: the awarded company must promote the use of recyclable or recycled packaging materials.
The SDA is considered concluded either when the time limit expires or when the economic limit of the maximum authorised amount is reached.
Procedurally, missing or defective documentation can be corrected (subsanación) within three working days from notification, but only with documents existing before the end of the participation deadline; otherwise, the bidder will be excluded.
The texts do not explicitly describe penalties for non-performance or specific guarantees (fianzas), so these likely appear in the PCA, which is referenced but not fully reproduced here.
As for contradictions or corrections within the documents, there are some numerical and date inconsistencies.
For instance, the Acuerdo de inicio states a Valor Máximo del Contrato of 134,200 EUR without VAT, while the detailed “Criterio utilizado para la fijación del importe de licitación” and “Criterios de valoración” documents fix the VMC at 134,000 EUR.
Since the latter includes a clear breakdown (PBL 61,000 + prórrogas 61,000 + modifications 12,200 = 134,200), the 134,000 EUR appears to be a rounded or slightly inconsistent figure; the Acuerdo de inicio, being a formal opening and containing the detailed decomposition, would usually prevail for the exact value, pending confirmation by the PCA.
Similarly, the SDA duration is consistently described as two years with two possible annual extensions, but one document (Plataforma data) technically lists a four-year execution period (06/02/2024–06/02/2028), while another (14‑placsp‑19) refers to an SDA period 05/02/2024–05/02/2026 with possibility of two annual prórrogas, and then explicitly records a prórroga from 05/02/2026 to 05/02/2027.
In practice, the consistent legal statement is: base term 2 years from publication plus up to two annual extensions, up to a maximum of 4 years or until the economic maximum is reached; the individual prórroga decision for 2026–2027 is a specific application of this framework.
Finally, the Plataforma notice flags the solvency fields as “no aplica” at the initial stage, whereas the Memoria justificativa sets strict solvency thresholds – this is not a contradiction but reflects the LCSP practice that actual proof is only required from the bidder ranked first in each award process.
Seuls les documents de l'acheteur font foi. Mis à jour: 20/10/2026
Analyse d'éligibilité à partir du dossier
Qui a déjà gagné chez cet acheteur
Tous types de marchés de cet acheteur confondus — pas seulement ce secteur. Une ville achète logiciels et véhicules d'incendie au même service achats.
| Entreprise | Attributions | Période |
|---|---|---|
| SUMINISTROS MENDATA S.L. | 22 | 2020–2026 |
| SULZER PUMPS WASTEWATER SPAIN, S.A. | 19 | 2021–2026 |
| METALTRES PEFERLUI, S.L. | 18 | 2023–2026 |
| GRUPO ANSAREO AEB S.L. | 15 | 2021–2026 |
| Seidor Tech, S.A. | 15 | 2022–2026 |
À quelle fréquence cet acheteur lance ce type de marché
Tactique
Lorsque cet acheteur a attribué des marchés dans ce secteur, il n'arrivait le plus souvent qu'une ou deux offres. Une offre solide a ici de vraies chances. (D'après 14 attributions terminées — aucune indication sur cette procédure.)
Cette procédure laisse 733 jours entre la publication et la date limite — l'usage dans ce pays est de 26 (médiane de 7 730 procédures). Nettement plus long que d'habitude — le temps d'une offre soignée plutôt que rapide.
Soumissionnaires étrangers
En Espagne · Matériaux de construction, 36 marchés ont été remportés par des entreprises étrangères sur 3 ans (sur 29 394 attributions recensées) — principalement : France, Italie, Allemagne.
Comment candidater
Guide : comment candidater sur PLACSP — Plataforma de Contratación del Sector Público (Spanien) → Inscription, signature, frais — d'après le manuel de l'opérateur.
Ne manquez pas le prochain
Friedrich trouve des marchés comme celui-ci pour vous — chaque matin à 7 h 30, chacun vérifié par Claude (Anthropic), et il apprend de vos retours ce que fait vraiment votre entreprise.
S'inscrire maintenant