How to bid in this country: portals, deadlines, thresholds →
Purchase of agricultural machinery
Mezőgazdasági munkagépek beszerzése — original title
Your path to submission
- Deadline: 18 November at 12:00 — 17 days left.
- You submit on EKR — not here and not by e-mail. ↗
- Offer and evidence in: Hungarian.
- Collect your evidence — use the eligibility analysis on this page: it lists the requirements and, for known certificates, how to get them.
What the buyer is looking for
Purchase of agricultural machinery · The subject of the contract is the supply (purchase) of 2 new (unused) law enforcement officers to the Contracting Authority. Characteristics of the product: Order trainer. One or two orders of training mode. Towed version. Minimum working width not exceeding 320 cm, maximum working width forming two rows not less than 690 cm. Rotors have a minimum diameter of 285 cm. PTO speed requirement 540 rpm. Power demand up to 35 kW. Hydraulic stepless working width adjustment. Additional technical requirements are included in the documentation. In its tender, the tenderer must provide a description of the product offered in a duly signed form, with full details in accordance with the relevant table (Annex ‘Recommended technical parameters KMNPI Agricultural machines’ to the relevant part). The tender must contain the name of the product offered (manufacturer,…
Show full description
… type, place of origin; professional offer). The contracting authority draws attention to the Public Procurement Act. Sections 2(5) and 74(2). Contracting authority (ACP) under Decree No 321/2015. Pursuant to Section 46(3) of Government Decree No 321/2004 of 30 October 2004, it is stipulated that the reference to the make, origin, type of thing, procedure, activity, person, patent or trade mark specified in the notice launching the procedure and in the public procurement documents was made only in order to clearly determine the nature of the object, and the term ‘or equivalent’ is to be understood. Proof of equivalence is the responsibility of the tenderer (AT). Details are set out in the procurement document launching the procedure. · The subject of the contract is the delivery (purchase) of 2 new (unused) heavy discs to the Contracting Authority. Characteristics of the product: Heavy disc. Trailed disc with a minimum working width of 510 cm and a maximum working width of 530 cm. Its own weight is at least 5650 kg. Minimum 40 plates, minimum 660 cm, maximum 680 cm. The maximum division of the disc leaves is 270 mm. Equipped with a minimum of 4 wheels. The angular position of the disc rows is adjustable. Hydraulically folding design. Additional technical requirements are included in the documentation. In its tender, the tenderer must provide a description of the product offered in a duly signed form, with full details in accordance with the relevant table (Annex ‘Recommended technical parameters KMNPI Agricultural machines’ to the relevant part). The tender must contain the name of the product offered (manufacturer, type, place of origin; professional offer). The contracting authority draws attention to the Public Procurement Act. Sections 2(5) and 74(2). Contracting authority (ACP) under Decree No 321/2015. Pursuant to Section 46(3) of Government Decree No 321/2004 of 30 October 2004, it is stipulated that the reference to the make, origin, type of thing, procedure, activity, person, patent or trade mark specified in the notice launching the procedure and in the public procurement documents was made only in order to clearly determine the nature of the object, and the term ‘or equivalent’ is to be understood. Proof of equivalence is the responsibility of the tenderer (AT). Details are set out in the procurement document launching the procedure. · The subject of the contract is the delivery (sale) of 1 new (unused) soil loosener to the Contracting Authority. Characteristics of the product: Soil loosener. Achievable working depth of at least 50 cm. Number of loosening knives 5 pcs. Working width minimum 295 cm. Power demand up to 230 Le. Hydraulically adjustable nugget breaker cylinder with a minimum diameter of 210 mm. Equipped with support leg and road lighting. The knives are equipped with tensile-screw (shear-screw) insurance. Additional technical requirements are included in the documentation. In its tender, the tenderer must provide a description of the product offered in a duly signed form, with full details in accordance with the relevant table (Annex ‘Recommended technical parameters KMNPI Agricultural machines’ to the relevant part). The offer must include the offeror
Contract
Type of service
Clement What the numbers say about this buyer
- In this sector the buyer awards roughly every 3 months (25 awards, most recently March 2026) — by that rhythm the next award was due around June 2026. The last award went to ANDEST-2005 Kereskedelmi és Szolgáltató Kft.n = 25
- 38% of this buyer's awards went to companies that had already won here before (66 awards since 2018, spread over 24 companies). That is well above the sector norm (24%) — newcomers have a harder time here than elsewhere.n = 66 awards since 2018
- The median procedure drew 3 bids (65 procedures with a bid count); 9% ended with a single bidder. Sector: median 3 bids.n = 65
- 2% of awards went to companies from abroad (66 awards with a known winner country). Sector average: 1%.n = 66
- 0% of the bids received came from other countries (49 procedures with a bid mix) — all bidders, not just the winners. Sector: 0%.n = 49
From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 25/10/2026.
What you must prove — eligibility criteria
M1. Alkalmatlan az ajánlattevő valamennyi rész tekintetében, ha nem rendelkezik az eljárást megindító felhívás feladásától visszafelé számított 36 hónapon belül befejezett, de legfeljebb 72 hónapon belül megkezdett, az előírásoknak megfelelően teljesített, öss… read in fullcollapse
M1. Alkalmatlan az ajánlattevő valamennyi rész tekintetében, ha nem rendelkezik az eljárást megindító felhívás feladásától visszafelé számított 36 hónapon belül befejezett, de legfeljebb 72 hónapon belül megkezdett, az előírásoknak megfelelően teljesített, öss… read in fullcollapse
M1. Alkalmatlan az ajánlattevő valamennyi rész tekintetében, ha nem rendelkezik az eljárást megindító felhívás feladásától visszafelé számított 36 hónapon belül befejezett, de legfeljebb 72 hónapon belül megkezdett, az előírásoknak megfelelően teljesített, öss… read in fullcollapse
M1. Alkalmatlan az ajánlattevő valamennyi rész tekintetében, ha nem rendelkezik az eljárást megindító felhívás feladásától visszafelé számított 36 hónapon belül befejezett, de legfeljebb 72 hónapon belül megkezdett, az előírásoknak megfelelően teljesített, öss… read in fullcollapse
M1. Alkalmatlan az ajánlattevő valamennyi rész tekintetében, ha nem rendelkezik az eljárást megindító felhívás feladásától visszafelé számított 36 hónapon belül befejezett, de legfeljebb 72 hónapon belül megkezdett, az előírásoknak megfelelően teljesített, öss… read in fullcollapse
M1. Alkalmatlan az ajánlattevő valamennyi rész tekintetében, ha nem rendelkezik az eljárást megindító felhívás feladásától visszafelé számított 36 hónapon belül befejezett, de legfeljebb 72 hónapon belül megkezdett, az előírásoknak megfelelően teljesített, öss… read in fullcollapse
Tender documents — direct download
Who has won at this buyer so far
Across all contract types of this buyer — not just this sector. A city buys software and fire engines through the same purchasing office.
| Company | Awards | Period |
|---|---|---|
| VALKON 2007. Kereskedelmi és Szolgáltató Zártkörűen Működő Részvénytársaság | 5 | 2025–2026 |
| Kovács és Társa Mezőgazdasági, Kereskedelmi és Szolgáltató Betéti Társaság | 5 | 2024–2026 |
| AXIÁL JAVÍTÓ, KERESKEDELMI ÉS SZOLGÁLTATÓ KORLÁTOLT FELELŐSSÉGŰ TÁRSASÁG | 5 | 2025–2026 |
| SÁNDOR & ILDIKÓ TRANS Korlátolt Felelősségű Társaság | 3 | 2024–2026 |
| Zanócz Antal | 3 | 2024–2026 |
How often this buyer tenders this kind of work
Tactics
When this buyer has awarded in this sector, usually about 4 bids came in. A normal field for this market. (Based on 25 completed awards — not a statement about this procedure.)
This procedure allows 30 days between publication and deadline — typical in this country is 30 (median of 664 procedures). A normal window for this market.
Foreign bidders
In Hungary, 322 contracts went to foreign companies over the last 3 years (of 21,931 recorded awards) — mostly from Germany, Czechia, Croatia.
Submission language: Hungarian.
How to bid
Don't miss the next one
Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.
Register now