How to bid in this country: portals, deadlines, thresholds →
Supply of medical equipment under the project ‘Extension and specialised integrated outpatient equipment within the municipal emergency hospital in Pascani’ SMIS code 323256
Furnizare echipamente medicale în cadrul proiectului „extindere și dotare ambulatoriu integrat de specialitate din cadrul spitalului municipal de urgență pașcani" Cod smis 323256 — original title
Your path to submission
- Deadline: 3 November at 15:00 — 3 days left.
- The submission point is stated in the notice (link on this page).
- Offer and evidence in: Romanian.
- Collect your evidence — use the eligibility analysis on this page: it lists the requirements and, for known certificates, how to get them.
What the buyer is looking for
Supply, delivery to the place of destination, installation, commissioning, testing and training of the personnel for the medical equipment necessary for the endowment of the specialized integrated ambulatory within the Pașcani Municipal Emergency Hospital, in a structure of 11 lots, according to the table in point II.1.6 and to the Specifications 26587/14.09.2026. The technical specifications of each heading are contained in the data sheets annexed to the product specification, to which the product specification refers by means of the data sheet code. Notes: *) The number of days until which clarifications can be requested before the closing date for submission of tenders is 20 days. The contracting authority will respond in a clear and complete manner to all requests for clarifications submitted within the above-mentioned deadline at least 10 days before the deadline set for the…
Show full description
… submission of tenders, in accordance with Article 161(1) of Law No 98/2016, for requests submitted within the deadline laid down in the contract notice. · LOT no. 1 - Ultrasound equipment Within this lot it is desired to purchase the following equipment: 1. 3-probe ultrasound – 1 piece (Technical sheet - GO-FT01) 2. Probe transducer ultrasound – 1 piece (Technical sheet - E-FT03) 3. Abdominal ultrasound – 1 piece (Technical sheet - G-FT02) 4. Transducer ultrasound – 1 piece (Technical sheet - C-FT02) 5. Ultrasound 3 probes – 1 piece (Technical sheet - LR-FT03) The technical specifications can be found in the Specifications correlated with the requirements in the technical sheets of each equipment. All technical specifications in the tender documentation (national standards transposing European standards, European technical assessments, common technical specifications, international standards, other technical reference systems established by the European standardisation bodies) shall be read as ‘or equivalent’. · LOT no. 2 - Endoscopy equipment. Within this lot, it is intended to purchase the following equipment: 1. Videocolonoscope + Videoendoscope – 1 piece (Technical sheet - G-FT01) 2. Video-rhino-laryngoscope – 1 piece (Technical sheet - O-FT01) The technical specifications can be found in the Specifications correlated with the requirements in the technical sheets of each equipment. All technical specifications in the tender documentation (national standards transposing European standards, European technical assessments, common technical specifications, international standards, other technical reference systems established by the European standardisation bodies) shall be read as ‘or equivalent’. · LOT no. 3 - Clinical laboratory and histopathology equipment Within this lot it is intended to purchase the following equipment: 1. Optical microscope – 1 piece (Technical sheet - L-FT01) 2. Orbital agitator without heating – 1 piece (Technical sheet - L-FT03) 3. Microtome – 1 piece (Technical sheet - LAP-FT01) 4. Automatic Blade Coloring System – 1 piece (Technical sheet - LAP-FT02) The technical specifications can be found in the Specifications correlated with the requirements in the technical sheets of each equipment. All technical specifications in the tender documentation (national standards transposing European standards, European technical assessments, common technical specifications, international standards, other technical reference systems established by the European standardisation bodies) shall be read as ‘or equivalent’. · LOT no. 4 - Laboratory equipment for centrifugation and sampling Within this lot it is intended to purchase the following equipment: 1. Universal laboratory centrifuge – 1 piece (Technical sheet - L-FT02) 2. Bench sampling – 1 piece (Technical sheet - LAP-FT03) The technical specifications can be found in the specifications correlated with the requirements in the technical sheets of each equipment. All technical specifications in the tender documentation (national standards transposing European standards, European technical assessments, specific
Contract
Type of service
Clement What the numbers say about this buyer
- In this sector the buyer awards roughly every 4 months (10 awards, most recently September 2026) — the next award is due around January 2027 by that rhythm. The last award went to DRAEGER ROMANIA.n = 10
- The median procedure drew 2 bids (17 procedures with a bid count); 12% ended with a single bidder. Sector: median 7 bids.n = 17
- 58% of this buyer's awards went to companies that had already won here before (346 awards since 2021, spread over 143 companies). That is well below the sector norm (90%) — this buyer switches suppliers more often than others.n = 346 awards since 2021
- 92% of the bids received came from small and medium-sized enterprises (14 procedures with a bid mix). Sector: 58%.n = 14
- 8% of the bids received came from other countries (14 procedures with a bid mix) — all bidders, not just the winners. Sector: 2%.n = 14
From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 31/10/2026.
What you must prove — eligibility criteria
Operatorii economici care depun ofertă trebuie să dovedească o formă de înregistrare în condițiile legii din țara de rezidență, din care să reiasă că operatorul economic este legal constituit, că nu se află în niciuna dintre situațiile de anulare a constituiri… read in fullcollapse
Modalitatea de indeplinire: EXCLUSIV la LOT 1 și LOT 2. Ofertanții care depun ofertă pentru LOT 1 și/sau LOT 2 trebuie să facă dovada că, în cursul unei perioade care acoperă cel mult ultimii 3 ani, calculați până la data-limită de depunere a ofertelor, au efe… read in fullcollapse
Modalitatea de indeplinire: Autoritatea contractantă solicită ofertantului să precizeze în ofertă partea/părțile din contract pe care urmează să le subcontracteze și datele de identificare ale subcontractanților propuși, dacă aceștia sunt cunoscuți la momentul… read in fullcollapse
Cerința se aplică inclusive pentru subcontractanți și/sau terți susținători care completează informațiile aferente situației lor la nivelul unui DUAE distinct. Toate certificatele şi autorizațiile trebuie să fie in termen de valabilitate. Se vor anexa copii al… read in fullcollapse
Operatorii economici care depun ofertă trebuie să dovedească o formă de înregistrare în condițiile legii din țara de rezidență, din care să reiasă că operatorul economic este legal constituit, că nu se află în niciuna dintre situațiile de anulare a constituiri… read in fullcollapse
Modalitatea de indeplinire: EXCLUSIV la LOT 1 și LOT 2. Ofertanții care depun ofertă pentru LOT 1 și/sau LOT 2 trebuie să facă dovada că, în cursul unei perioade care acoperă cel mult ultimii 3 ani, calculați până la data-limită de depunere a ofertelor, au efe… read in fullcollapse
Modalitatea de indeplinire: Autoritatea contractantă solicită ofertantului să precizeze în ofertă partea/părțile din contract pe care urmează să le subcontracteze și datele de identificare ale subcontractanților propuși, dacă aceștia sunt cunoscuți la momentul… read in fullcollapse
Cerința se aplică inclusive pentru subcontractanți și/sau terți susținători care completează informațiile aferente situației lor la nivelul unui DUAE distinct. Toate certificatele şi autorizațiile trebuie să fie in termen de valabilitate. Se vor anexa copii al… read in fullcollapse
Operatorii economici care depun ofertă trebuie să dovedească o formă de înregistrare în condițiile legii din țara de rezidență, din care să reiasă că operatorul economic este legal constituit, că nu se află în niciuna dintre situațiile de anulare a constituiri… read in fullcollapse
Modalitatea de indeplinire: EXCLUSIV la LOT 1 și LOT 2. Ofertanții care depun ofertă pentru LOT 1 și/sau LOT 2 trebuie să facă dovada că, în cursul unei perioade care acoperă cel mult ultimii 3 ani, calculați până la data-limită de depunere a ofertelor, au efe… read in fullcollapse
Modalitatea de indeplinire: Autoritatea contractantă solicită ofertantului să precizeze în ofertă partea/părțile din contract pe care urmează să le subcontracteze și datele de identificare ale subcontractanților propuși, dacă aceștia sunt cunoscuți la momentul… read in fullcollapse
Cerința se aplică inclusive pentru subcontractanți și/sau terți susținători care completează informațiile aferente situației lor la nivelul unui DUAE distinct. Toate certificatele şi autorizațiile trebuie să fie in termen de valabilitate. Se vor anexa copii al… read in fullcollapse
Operatorii economici care depun ofertă trebuie să dovedească o formă de înregistrare în condițiile legii din țara de rezidență, din care să reiasă că operatorul economic este legal constituit, că nu se află în niciuna dintre situațiile de anulare a constituiri… read in fullcollapse
Modalitatea de indeplinire: EXCLUSIV la LOT 1 și LOT 2. Ofertanții care depun ofertă pentru LOT 1 și/sau LOT 2 trebuie să facă dovada că, în cursul unei perioade care acoperă cel mult ultimii 3 ani, calculați până la data-limită de depunere a ofertelor, au efe… read in fullcollapse
Tender documents — direct download
Who has won at this buyer so far
Across all contract types of this buyer — not just this sector. A city buys software and fire engines through the same purchasing office.
| Company | Awards | Period |
|---|---|---|
| VIOSAND TRICOTEXT | 32 | 2024–2026 |
| SC TECO CRIS | 30 | 2024–2026 |
| GRADINARIU IMPORT EXPORT | 16 | 2024–2026 |
| GP CREATIV S.R.L. | 10 | 2024–2026 |
| AUTO TRANS COM S.R.L. | 10 | 2024–2026 |
How often this buyer tenders this kind of work
Tactics
When this buyer has awarded in this sector, usually 5 or more bids came in. Many compete here — price and references decide. (Based on 7 completed awards — not a statement about this procedure.)
This procedure allows 19 days between publication and deadline — typical in this country is 33 (median of 2,743 procedures). Much tighter than usual: the first week counts.
Foreign bidders
In Romania · Medical equipment & pharma, 2,650 contracts went to foreign companies over the last 3 years (of 639,937 recorded awards) — mostly from Germany, France, Italy.
Submission language: Romanian.
How to bid
Don't miss the next one
Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.
Register now