How to bid in this country: portals, deadlines, thresholds →
International electronic open procedure tender for the "supply and installation of scientific equipment of the metal construction workshop of the Civil Engineering Department of the Aristotle University of Thessaloniki" (proclamation number 740/2026)
Διεθνης ηλεκτρονικος διαγωνισμος ανοικτης διαδικασιας μεσω εσηδης για την "Προμηθεια και εγκατασταση επιστημονικου εξοπλισμου του εργαστηριου μεταλλικων κατασκευων του τμηματος πολιτικων μηχανικων του απθ " (αριθμος διακηρυξης 740/2026) — original title
Your path to submission
- Deadline: 30 November at 23:59 — 30 days left.
- The submission point is stated in the notice (link on this page).
- Offer and evidence in: Greek.
- Collect your evidence — use the eligibility analysis on this page: it lists the requirements and, for known certificates, how to get them.
What the buyer is looking for
The subject of the contract is the supply and installation of scientific equipment of the Metal Structures Laboratory of the Department of Civil Engineering of the Aristotle University of Thessaloniki. Items to be procured are classified under the Common Procurement Vocabulary (CPV) code: 38000000-5 Laboratory equipment. This contract is divided into the following six (6) lots: Section 1: .Servo-hydraulic dynamic load control system 100kN and Servo-hydraulic system of two free pistons and other equipment for control of structural members and systems, budget excluding VAT 474.519,60€, budget with VAT 588.404,30€ Section 2: Universal Static Charge Testing Machine- Electromechanical Universal Computer Control Testing Machine WDW (Dual Space) 100kN series, budget excluding VAT 30.625,00€, budget with VAT 37.975,00€ Section 3: .Seismic bank (Portable-single-axial), budget excluding VAT…
Show full description
… 26.800,00€, budget with VAT 33.232,00€ Section 4: Support system for technical correlation of digital images, budget excluding VAT 61.680,00€, budget with VAT 76.483,20€ Section 5: Testing device for frames, doors, sheets, gates, curtain walls, budget excluding VAT 126.068,55€, budget with VAT 156.325,00€ Section 6: * Metal frame supporting servo-hydraulic pistons, budget without VAT 76.612,90€, budget with VAT 95.000,00€ . Tenders shall be submitted for one (1) or more lots of the competition or all lots, for all the items of the lot. The total estimated value of the contract for all six (6) lots amounts to €796,306.05 excluding 24% VAT (estimated value including VAT: €987,419.50). The duration of the contract shall be: • ten (10) months for Lot 1 • eight (8) months for Lots 2, 3, 4 & 6 • twenty (20) months for Lot 5 A detailed description of the physical and financial object of the contract is given in ANNEX I to this notice. The contract will be awarded on the basis of the most economically advantageous tender, on the basis of the best value for money. · The object of Section 1 is the supply of a Servo-Hydraulic Dynamic Load Control System of 100kN and a Servo-Hydraulic System of two free pistons and other equipment for controlling structural members and systems, with the following technical characteristics: 1) Charging System-Frame +/-100kN, 2) Free Hydraulic Dynamic Load Pistons of metal and composite structures +/-50kN, 3) Hydraulic supply units for external free pistons, 4) Hydraulic power supply unit, 5) Digital Operation Controller (PSL) and frame & free piston operation software, 6) Special and general application software, 7) Components and accessories and 8) Installation, training, warranty; The subject of section 2, is the supply of universal static load testing machine- electromechanical universal computer control testing machine WDW (Dual Space) 100kN series. The proposed equipment (100kN universal material strength testing machine) should be able to be used in different applications with component composition and additional sub-units for testing general type of material strength and behavior testing but also special type for specialized testing on various material strength research objects (in our case-metallic materials), investigation of special characteristics of composite or innovative metal materials, etc., in compression, tensile, bending, shearing and in different ambient conditions of temperature and cooling with the addition of special components and/or special test chamber. · The object of Section 3 is the supply of a seismic bank (portable-mono-axial). The described system will be used in a laboratory for research or training by simulating seismic events or oscillations on scale structures or parts of structures of limited dimensions and mass packed on the bank. The system has j
Contract
Type of service
Clement What the numbers say about this buyer
- 19% of this buyer's awards went to companies that had already won here before (124 awards since 2021, spread over 79 companies). That is well below the sector norm (64%) — this buyer switches suppliers more often than others.n = 124 awards since 2021
- 39% of awards went to companies from abroad (124 awards with a known winner country). Sector average: 2%.n = 124
- The median procedure drew just one bid (102 procedures with a bid count); 68% ended with a single bidder. Sector: median 1 bid.n = 102
- The award came in at a median 62% of the estimated value (32 awards with both estimate and value) — pricing at the estimate is usually too high here. Sector: 60%.n = 32
- 7% of the bids received came from other countries (64 procedures with a bid mix) — all bidders, not just the winners. Sector: 1%.n = 64
From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 01/11/2026.
What you must prove — eligibility criteria
Οι οικονομικοί φορείς που συμμετέχουν στη διαδικασία σύναψης της παρούσας σύμβασης απαιτείται να ασκούν εμπορική ή βιομηχανική ή βιοτεχνική δραστηριότητα συναφή με το αντικείμενο της προμήθειας. Οι οικονομικοί φορείς που είναι εγκατεστημένοι σε κράτος μέλος τη… read in fullcollapse
Όσον αφορά την οικονομική και χρηματοοικονομική επάρκεια για την παρούσα διαδικασία σύναψης σύμβασης, οι οικονομικοί φορείς απαιτείται να διαθέτουν: 1. Ειδικό [σχετικό με το αντικείμενο της σύμβασης] ετήσιο κύκλο εργασιών για τα οικονομικά έτη 2023, 2024 και 2… read in fullcollapse
Όσον αφορά στην τεχνική και επαγγελματική ικανότητα για την παρούσα διαδικασία σύναψης σύμβασης, οι οικονομικοί φορείς οφείλουν να διαθέτουν: α) Κατάλληλα εκπαιδευμένο προσωπικό για την εκπαίδευση του προσωπικού του ΑΠΘ στη χρήση του προσφερόμενου εξοπλισμού β… read in fullcollapse
Οι οικονομικοί φορείς και οι κατασκευάστριες εταιρείες για την παρούσα διαδικασία σύναψης σύμβασης οφείλουν να συμμορφώνονται με πιστοποίηση ISO 9001:2015 ή ισοδύναμο πιστοποιητικό, σε θέματα προμήθειας εξοπλισμού. Η αναθέτουσα αρχή αναγνωρίζει ισοδύναμα πιστο… read in fullcollapse
Οι οικονομικοί φορείς που συμμετέχουν στη διαδικασία σύναψης της παρούσας σύμβασης απαιτείται να ασκούν εμπορική ή βιομηχανική ή βιοτεχνική δραστηριότητα συναφή με το αντικείμενο της προμήθειας. Οι οικονομικοί φορείς που είναι εγκατεστημένοι σε κράτος μέλος τη… read in fullcollapse
Όσον αφορά την οικονομική και χρηματοοικονομική επάρκεια για την παρούσα διαδικασία σύναψης σύμβασης, οι οικονομικοί φορείς απαιτείται να διαθέτουν: 1. Ειδικό [σχετικό με το αντικείμενο της σύμβασης] ετήσιο κύκλο εργασιών για τα οικονομικά έτη 2023, 2024 και 2… read in fullcollapse
Όσον αφορά στην τεχνική και επαγγελματική ικανότητα για την παρούσα διαδικασία σύναψης σύμβασης, οι οικονομικοί φορείς οφείλουν να διαθέτουν: α) Κατάλληλα εκπαιδευμένο προσωπικό για την εκπαίδευση του προσωπικού του ΑΠΘ στη χρήση του προσφερόμενου εξοπλισμού β… read in fullcollapse
Οι οικονομικοί φορείς και οι κατασκευάστριες εταιρείες για την παρούσα διαδικασία σύναψης σύμβασης οφείλουν να συμμορφώνονται με πιστοποίηση ISO 9001:2015 ή ισοδύναμο πιστοποιητικό, σε θέματα προμήθειας εξοπλισμού. Η αναθέτουσα αρχή αναγνωρίζει ισοδύναμα πιστο… read in fullcollapse
Οι οικονομικοί φορείς που συμμετέχουν στη διαδικασία σύναψης της παρούσας σύμβασης απαιτείται να ασκούν εμπορική ή βιομηχανική ή βιοτεχνική δραστηριότητα συναφή με το αντικείμενο της προμήθειας. Οι οικονομικοί φορείς που είναι εγκατεστημένοι σε κράτος μέλος τη… read in fullcollapse
Όσον αφορά την οικονομική και χρηματοοικονομική επάρκεια για την παρούσα διαδικασία σύναψης σύμβασης, οι οικονομικοί φορείς απαιτείται να διαθέτουν: 1. Ειδικό [σχετικό με το αντικείμενο της σύμβασης] ετήσιο κύκλο εργασιών για τα οικονομικά έτη 2023, 2024 και 2… read in fullcollapse
Όσον αφορά στην τεχνική και επαγγελματική ικανότητα για την παρούσα διαδικασία σύναψης σύμβασης, οι οικονομικοί φορείς οφείλουν να διαθέτουν: α) Κατάλληλα εκπαιδευμένο προσωπικό για την εκπαίδευση του προσωπικού του ΑΠΘ στη χρήση του προσφερόμενου εξοπλισμού β… read in fullcollapse
Οι οικονομικοί φορείς και οι κατασκευάστριες εταιρείες για την παρούσα διαδικασία σύναψης σύμβασης οφείλουν να συμμορφώνονται με πιστοποίηση ISO 9001:2015 ή ισοδύναμο πιστοποιητικό, σε θέματα προμήθειας εξοπλισμού. Η αναθέτουσα αρχή αναγνωρίζει ισοδύναμα πιστο… read in fullcollapse
Οι οικονομικοί φορείς που συμμετέχουν στη διαδικασία σύναψης της παρούσας σύμβασης απαιτείται να ασκούν εμπορική ή βιομηχανική ή βιοτεχνική δραστηριότητα συναφή με το αντικείμενο της προμήθειας. Οι οικονομικοί φορείς που είναι εγκατεστημένοι σε κράτος μέλος τη… read in fullcollapse
Όσον αφορά την οικονομική και χρηματοοικονομική επάρκεια για την παρούσα διαδικασία σύναψης σύμβασης, οι οικονομικοί φορείς απαιτείται να διαθέτουν: 1. Ειδικό [σχετικό με το αντικείμενο της σύμβασης] ετήσιο κύκλο εργασιών για τα οικονομικά έτη 2023, 2024 και 2… read in fullcollapse
Tender documents — direct download
Tactics
When this buyer has awarded in this sector, there was usually a single bid in the end. A solid bid has a real chance here. (Based on 26 completed awards — not a statement about this procedure.)
This procedure allows 57 days between publication and deadline — typical in this country is 34 (median of 2,398 procedures). Much more generous than usual — time for a thorough bid rather than a quick one.
The deadline falls on a Monday — your last full working day is the Friday before. Have evidence and guarantees together by Thursday.
Foreign bidders
In Greece · Laboratory & optical equipment, 158 contracts went to foreign companies over the last 3 years (of 10,094 recorded awards) — mostly from Germany, Italy, France.
Submission language: Greek.
How to bid
Don't miss the next one
Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.
Register now