Zakup i dostawa koparki oraz wózka widłowego

… a load of at least 12 km/h. • Ability to climb at least 15%. • Maximum pulling force at least 17 kN. • Turning radius not greater than 2200 mm. • Hydraulic power steering. • Mast with the possibility of sloping forward/backward. • LCD display showing the basic operating parameters of the vehicle. • Pneumatic or super-flexible tyres for warehouse and outdoor applications. • Unladen weight not more than 5000 kg. • Operator's station equipped with a protective roof in accordance with applicable safety standards. Recommended equipment: • forks with a minimum length of 1070 mm, • side shift, • reversing signal, • LED work lights at the front and rear, • warning lamp, • rear-view mirrors, • charger for the traction battery, • operator's seat with adjustment, • instruction manual in Polish, • technical and operating documentation, • warranty document. Application: • transport and storage of loads on pallets, • warehouse services, • loading and unloading of means of transport, • transport work inside and outside storage facilities. All parameters given in the above description of the order should be treated as minimal. The Ordering Party allows the delivery of devices with higher parameters. Proposed devices must be brand new. 2. The subject of the contract is the purchase and supply of a brand-new electrically powered tracked mini-excavator, intended for earth, installation, road, pavement and general construction works, together with basic equipment, technical and traffic documentation and operating instructions in Polish for the purposes of the ‘Budowlaniec Future’ project – development of the competences of students and teachers at School Complex No 1 in Wieluń. Mini excavator – minimum requirements • electric mini tracked excavator (zero emission in the workplace); • Operating mass: 1.8 t – 2.0 t; • electric drive based on traction batteries (lithium-ion technology or equivalent); • Adaptation to work in internal and external conditions. • Maximum digging depth: ≥ 2 300 mm; • Maximum excavation range at site level: ≥ 4 000 mm; • bucket extraction force: ≥ 15 kN; • Turnover of bodywork: 360°. • crawler chassis with rubber tracks; • hydraulically sliding chassis in the range of approx. 980-1350 mm; • Bulldozer blade adapted to the width of the chassis; • two speed ranges. • hydraulic system adapted to work equipment; • additional hydraulic line (AUX function); • proportional control of the additional hydraulic circuit from the operator's joystick. • Lithium-ion traction batteries or equivalent; • Battery Management System (BMS); • possibility of charging from 230 V network; • the possibility of charging from a three-phase installation; • working time on one charging cycle adapted to typical construction work (minimum several hours of continuous operation). • Operator's cabin closed, glazed; • ROPS/FOPS compliant design; • Cabin heating; • digital pa display