How to bid in this country: portals, deadlines, thresholds →
Delivery of reinforced concrete multi-hole slabs for the implementation of the task entitled "Zagórze Śląskie access road to agricultural land"
Dostawa żelbetowych płyt wielootworowych na potrzeby realizacji zadania pn. "Zagórze Śląskie droga dojazdowa do gruntów rolnych" — original title
Your path to submission
- Deadline: 5 November at 09:00 — 4 days left.
- You submit on eZamówienia — not here and not by e-mail. ↗ Submission via eZamówienia: account required; above the EU threshold a qualified signature, nationally the 'trusted signature' often suffices — check the wording. Sort out account and signature first — not on submission day.
- Collect your evidence — the eligibility requirements are listed on this page; for many of them the analysis explains how to obtain them.
What the buyer is looking for
1. The subject of the order is the delivery of prefabricated reinforced concrete multi-hole slabs with dimensions of 100×75×12.5 cm. 2. Number of ordered plates: 660 units 3. The plates must be of grade 1 4. JOMB boards should have Technical Approval and Declaration of Conformity (after January 1, 2017, the boards should have documents: the National Technical Assessment – replacing the Technical Approval and the National Declaration of Performance – issued instead of the National Declaration of Conformity). 5. The surface of the plates should be even without crayfish, cracks, cracks and fissures. Minor recesses and convexities up to 5 mm deep or high are acceptable. 6. The concrete from which the slab is made should meet the requirements for the minimum strength class C20/25 according to PN-EN 206-1:2003 and PN-B-06265:2004. 7. Steel used to perform reinforcement should meet the…
Show full description
… requirements of PN-ISO 6935-1:1998, PN-ISO 6935-1/Ak:1998, PN-ISO 6935-2:1998, PN-ISO 6935-2, JOMB road plate reinforcement should be made in accordance with the individual technical documentation of the manufacturer, the plates must be reinforced with double steel mesh according to PN-82/H-93215 in the zone of the lower and upper thickness of bars min. 6 mm. The coat thickness of the main rebars should be 30 ± 5 mm. 8. The absorbability should be ≤ 6% and the degree of frost resistance ≥ F 150. 9. Required period of so-called maturation (the period from production to delivery) min. 3 weeks, and max 12 months. 10. The edges of the plates should be straight and parallel to each other. Small chipping and chipping of edges with a depth and width of up to 5 mm and a length of up to 20 mm in the number of 2 pieces per 1 m of plate are allowed, with no more than 3 chippings on one edge of the upper surface and no more than 4 chippings on the lower surface. The twisting of the edges of the upper and lower surfaces shall not exceed 3 mm per 1 m of plate length. The side surfaces of the plates should be free from cracks, scratches, recesses and protrusions. The deviation from the nominal dimensions should be: length ± 3 mm, width ± 3 mm, thickness ± 3 mm. 11. In addition to sales, the supply of multi-hole plates also includes: loading, transport and unloading at the places indicated by the contracting authority in the municipality of Walim. Required transport by car with its own unloading, eg. HDS. 12. The detailed description of the subject-matter of the contract contains (Annexes 3 to the ToR) the relevant contractual provisions (Annex 3 to the ToR).
Contract
Type of service
Clement What the numbers say about this buyer
- In this sector the buyer awards roughly every 13 months (11 awards, most recently June 2026) — the next award is due around July 2027 by that rhythm. The last award went to Przedsiębiorstwo Produkcyjno-Handlowo-Usługowe "VIOLA" Jerzy Pawłowski.n = 11
- 19% of this buyer's awards went to companies that had already won here before (75 awards since 2015, spread over 52 companies). That is well below the sector norm (40%) — this buyer switches suppliers more often than others.n = 75 awards since 2015
- The median procedure drew just one bid (6 procedures with a bid count); 83% ended with a single bidder. Sector: median 3 bids.n = 6
- 7% of awards went to companies from abroad (75 awards with a known winner country). Sector average: 1%.n = 75
From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 01/11/2026.
Who has won at this buyer so far
Across all contract types of this buyer — not just this sector. A city buys software and fire engines through the same purchasing office.
| Company | Awards | Period |
|---|---|---|
| PRZEDIĘBIORSTWO WIELOBRANŻOWE „TOMALIK" | 4 | 2022–2024 |
| Alba Dolny Śląsk sp. z o.o. | 3 | 2023 |
| Przedsiębiorstwo Produkcyjno-Handlowo-Usługowe "VIOLA" Jerzy Pawłowski | 3 | 2025–2026 |
| Materiały Budowlane TOP s.c. | 2 | 2023–2024 |
| Przedsiębiorstwo Transportowe Travelworld - Izabella Szymańczak | 2 | 2022–2024 |
How often this buyer tenders this kind of work
Contracting authority contact
Tactics
When contracts were awarded in this country and sector, usually about 3 bids came in. A normal field for this market. (Based on 1,866 completed awards — not a statement about this procedure.)
This procedure allows 8 days between publication and deadline — typical in this country is 18 (median of 9,435 procedures). Much tighter than usual: the first week counts.
Foreign bidders
In Poland · Construction materials, 28 contracts went to foreign companies over the last 3 years (of 9,368 recorded awards) — mostly from Germany, France, Czechia.
How to bid
Guide: how to apply on e-Zamówienia (Polen) → Registration, signature, fees — from the operator's bidder manual.
Don't miss the next one
Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.
Register now