How to bid in this country: portals, deadlines, thresholds →

Supplier Qualification System for SAWL Linepipe and Pipeline Induction Bend Supply Contracts for the Danish Hydrogen Backbone - 26/24083

DKDenmark · Fredericia

Qualification system. Suppliers can qualify at any time; contracts are later awarded among qualified suppliers. The date shown is the end of the system, not a submission deadline.

Your path to submission

Deadline for requests to participate: 27 November at 12:00 — 26 days left. Two-stage procedure: by this deadline you submit a request to participate (proof of eligibility). Only shortlisted firms are then invited to submit a tender.
The submission point is stated in the notice (link on this page).
Offer and evidence in: English.
Collect your evidence — use the eligibility analysis on this page: it lists the requirements and, for known certificates, how to get them.

Compiled automatically from notice and documents — no guarantee; the procedure's wording is binding.

What the buyer is looking for

The Danish Hydrogen Backbone (“DHB”) project is a comprehensive effort to establish hydrogen infrastructure in Denmark, connecting planned large-scale renewable hydrogen production in Denmark with the German and European hydrogen markets. The full back-bone is planned to extend from underground storage in northern Denmark to the German border. The first phase focuses on the southern part of the system, with operation planned by the end of 2030. The purpose of the SQS is to establish a pool of qualified Suppliers that may be invited to participate in procurements for SAWL linepipe, external coating and pipeline induction bends required for the Danish Hydrogen Backbone. The first expected call-off is anticipated to concern the Danish Hydrogen Backbone Phase 1. The pres-ently anticipated scope includes 30-inch and 36-inch longitudinal submerged arc welded carbon steel linepipe for…

Show full description

… high-pressure hydrogen transmission service, with a design pressure up to approximately 98.9 barg. The anticipated linepipe material is API 5L Grade X60 PSL 2 or equivalent. The supply is expected to include manufacture, material traceability, inspection, testing, certification, external 3LPE coating where required, preservation, marking, packing and delivery. The anticipated scope also includes factory-manufactured 30-inch and 36-inch pipeline induction bends compatible with the associated linepipe system. The bends are presently anticipated to comply with ASME B16.49, with radii generally between approximately 5D and 10D and angles between ap-proximately 6 degrees and 90 degrees. The bend supply is expected to include mother or source pipe arrangements, tangent lengths, manufacture, heat treatment where required, inspection, testing, certification, preservation, marking, packing and delivery. Applicants may rely on the technical and professional capacity of another entity, including a specialist induction bend manufacturer, subject to the requirements stated in the SQS documents. The final quantities, dimensions, wall thicknesses, bend radii, bend angles, coating requirements, testing re-quirements, delivery locations and delivery schedule will be specified in the individual tender docu-ments. · The Danish Hydrogen Backbone (“DHB”) project is a comprehensive effort to establish hydrogen infrastructure in Denmark, connecting planned large-scale renewable hydrogen production in Denmark with the German and European hydrogen markets. The full backbone is planned to extend from underground storage in northern Denmark to the German border. The first phase focuses on the southern part of the system, with operation planned by the end of 2030. The purpose of the SQS is to establish a pool of qualified Suppliers that may be invited to participate in procurements for SAWL linepipe, external coating and pipeline induction bends required for the Danish Hydrogen Backbone. The first expected call-off is anticipated to concern the Danish Hydrogen Backbone Phase 1. The pres-ently anticipated scope includes 30-inch and 36-inch longitudinal submerged arc welded carbon steel linepipe for high-pressure hydrogen transmission service, with a design pressure up to approximately 98.9 barg. The anticipated linepipe material is API 5L Grade X60 PSL 2 or equivalent. The supply is expected to include manufacture, material traceability, inspection, testing, certification, external 3LPE coating where required, preservation, marking, packing and delivery. The anticipated scope also includes factory-manufactured 30-inch and 36-inch pipeline induction bends compatible with the associated linepipe system. The bends are presently anticipated to comply with ASME B16.49, with radii generally between approximately 5D and 10D and angles between ap-proximately 6 degrees and 90 degrees. The bend supply is expected to include mother or source pipe arrangements, tangent lengths, manufacture, heat treatment where required, inspection, testing, certification, preservation, marking, packing and de

Contract

BuyerEnerginet Brint A/S

TypeSupplies

Estimated valuevalue not published

Published30 Oct 2026

ProcedureRestricted procedure

Type of service

44 · Construction materials

CPV 44160000 · 44161100 · 44163200

Clement

References and certificates from your home country count fully across the EU — that is what European procurement law is for.

What you must prove — eligibility criteria

›

Financial ratio required

For admission to the SQS, the Applicant must meet one of the following alternative minimum requirements based on the latest annual report: - an equity ratio of at least 20% and total equity of at least EUR 10 million; or - an equity ratio of at least 15% but below 20%, provided that total equity exceeds EUR 30 million. If the applicant is relying on the capacities of one or more other entities (e.g. a parent or sister company or a subcontractor) or the applicant is a group of economic operators (e.g. a consortium) the information for the ESPD part IV.B must also be given in a separate ESPD from each of these entities, cf. section VI.3 “Additional information”. It is the sole responsibility of the applicant to secure that the minimum levels required are reached on the basis of consolidation when the applicant is relying on the capacity of other entities or when the applicant is a group of economic operators (e.g. a consortium).

›

References: supplies

For admission to the SQS, the Applicant must document at least one comparable reference concerning the manufacture and supply of large-diameter linepipe for a hydrogen or natural-gas transmission pipe-line; and at least one comparable reference concerning the manufacture and supply of large-diameter pipeline induction bends for a hydrogen or natural-gas transmission pipeline. The requirement can be fulfilled by presenting one reference containing both elements. A comparable reference must concern linepipe manufactured and supplied in accordance with API 5L, ISO 3183, DNV-ST-F101 or another recognised equivalent transmission-pipeline standard. The reference must concern linepipe with a nominal outside diameter of at least 30 inches, a material grade of at least API 5L Grade X60 or an equivalent grade, and a design pressure of at least 50 barg. The Applicant must document at least one reference concerning the manufacture and supply of pipeline induction bends with a nominal outside diameter of at least 30 inches, produced from API 5L Grade X60 or an equivalent grade, for a hydrogen or natural-gas transmission pipeline. References must have commenced before the application submission date and must not have been completed more than five years before that date. If the applicant is relying on the references of one or more other entities (e.g. a parent or sister company or a subcontractor) or the applicant is a group of economic operators (e.g. a consortium) the information for the ESPD part IV.C must also be given in a separate ESPD from each of these entities.

Tender documents — direct download

⤓

Annex 1

Specifications and annexes at the buyer — usually viewable without registration

⤓

Administrative conditions

The full notice, official wording

Who has won at this buyer so far

Across all contract types of this buyer — not just this sector. A city buys software and fire engines through the same purchasing office.

Company	Awards	Period
Worley Danmark Solutions ApS	1	2026
Rosen Europe BV	1	2025

From the recorded awards · regular winners know this buyer's requirements — that is your competition.

Contracting authority contact

Email[email protected]

Deadline — Friday 27 November at 12:00

Deadline for requests to participate

Tactics

When contracts were awarded in this country and sector, usually about 3 bids came in. A normal field for this market. (Based on 140 completed awards — not a statement about this procedure.)

This procedure allows 29 days between publication and deadline — typical in this country is 32 (median of 309 procedures). A normal window for this market.

The rules of the market →

Foreign bidders

In Denmark, 2,186 contracts went to foreign companies over the last 3 years (of 14,314 recorded awards) — mostly from Germany, Sweden, Finland.

Submission language: English.

Measured from linked award data; foreign winners bidding through a local subsidiary count as domestic — the true share is higher.

How to bid

Read the full notice — Original + documents

Goes directly to this tender on TED — Tenders Electronic Daily. The full specification and all annexes are there.

Put together the evidence — in English

The 2 criteria on the left, plus your price.

Submit via TED — Tenders Electronic Daily before the deadline

Electronic submission — allow time for the portal registration the first time.

To the procurement portal →Official notice on TED →

We pull data from millions of notices. If the link here does not work, report it — we will find the right one.

Don't miss the next one

Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.