Friedrich & ClementBETA

How to bid in this country: portals, deadlines, thresholds →

SV-JWA-260907-001 - Environmental composite tube Laim TWT Munich, Machine smoke extraction system

SV-JWA-260907-001 - Umweltverbundröhre Laim TWT München, Maschinelle Entrauchungsanlage — original title

DEGermany · München

Your path to submission

  1. Deadline: 20 November at 12:00 — 19 days left.
  2. The submission point is stated in the notice (link on this page).
  3. Offer and evidence in: German.
  4. Collect your evidence — use the eligibility analysis on this page: it lists the requirements and, for known certificates, how to get them.
Compiled automatically from notice and documents — no guarantee; the procedure's wording is binding.

What the buyer is looking for

Umweltverbundröhre Laim TWT München, Machine smoke extraction system · Production and installation of a machine smoke extraction system (MRA) with integrated smoke apron and slope ceiling in the environmental connection tube at the S-Bahn station Laim. The system runs over the entire tunnel length of approximately 200 m and is divided into two sections, each with a smoke extraction fan. • 2 smoke extraction ducts (‘North’ and ‘South’) in the longitudinal direction of the tunnel with a total length of approximately 165 m2 made of stainless steel with cross-sectional areas of up to 3.2 m2 (various cross-sectional shapes; Special sizes!) as well as with a total of 18 pcs. intake openings. • 2 pieces flue gas fans F 400 / 120 min., DN 1250, (1 x 40 m3/s volume flow at approx. 1200 Pa and x 75 kW as well as 1 x 50 m3/s volume flow at approx. 1800 Pa, and 150 kW) incl. associated FU and…

Show full description

… clamping boxes • each 2 connections to on-site chimneys, manifolds, diffuser; Check valves, silencers, fans (see above), silencers, inlet nozzles, smoke chambers, passage through the smoke apron and connection to the above smoke extraction ducts in the longitudinal direction. The smoke extraction ducts and their attachment require approval on a case-by-case basis. // Smoke apron: Structure suspended from the building ceiling made of steel frame hollow profiles, with horizontal stiffening to the eastern wall of the building, covered on both sides with non-combustible, fire-retardant material and sheet metal cover, partly also filled with fire-resistant glass. • Total length: approx. 200 lfm • Total weight of the steel structure: approx. 20 to • Total area of the planking: approx. 800 m2 • total area of the glass surfaces: ca. 50 m2 • Number of outlets for smoke extraction pipes and intake openings: 20 pieces slope ceiling: Construction of a slope ceiling between the above-mentioned smoke apron and the eastern wall of the structure consisting of longitudinal and transverse beams to accommodate vertical sheet metal slats. • Lamella height: 200 mm, • Width of slats: 40 mm, • Sheet thickness: 0.7 mm, • Distance between axles: approx. mm

Machine translation (EU eTranslation) — official wording via the PDF link.

Contract

TypeWorks
Estimated valuevalue not published
Published30 Oct 2026
ProcedureOpen procedure
Contract period12 Mar 2027 → 31 Aug 2028
Reserved for SMEs

Type of service

45 · Construction work42 · Industrial machinery50 · Repair & maintenance
CPV 45343000 · 45331210 · 42521000 · 45343100 · 50712000

Clement What the numbers say about this buyer

  • In this sector the buyer awards roughly every 2 months (269 awards, most recently August 2026) — by that rhythm the next award was due around October 2026. The last award went to Rhomberg Sersa Bahntechnik GmbH.n = 269
  • 40% of this buyer's awards went to companies that had already won here before (699 awards since 2017, spread over 418 companies). 60% went to new names.n = 699 awards since 2017
  • The median procedure drew 3 bids (587 procedures with a bid count); 26% ended with a single bidder. Sector: median 4 bids.n = 587
  • 76% of the bids received came from small and medium-sized enterprises (92 procedures with a bid mix). Sector: 87%.n = 92
  • Across 75 procedures with structured selection criteria, this buyer most often required: Minimum annual headcount (74 of 75), Minimum turnover in the contract field (67 of 75), Professional register enrolment (49 of 75), References: works (46 of 75).n = 75

From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 01/11/2026.

Clement
In this buyer's last 346 comparable contracts (same sector), usually only 2 offers came in — a solid bid has real chances.
References and certificates from your home country count fully across the EU — that is what European procurement law is for.

What you must prove — eligibility criteria

›
Professional register enrolment
Nachweis der Eintragung in einem Berufsregister mittels Kopie der Eintragung im Berufsregister (Handwerksrolle bzw. Industrie- und Handelskammer).
›
Other economic requirement
Kriterium Umsatz bei vergleichbaren Leistungen: Erklärung über den Umsatz des Unternehmens bezogen auf die letzten drei abgeschlossenen Geschäftsjahre, soweit er Bauleistungen und andere Leistungen betrifft, die mit der zu vergebenden Leistung vergleichbar sin… read in fullcollapse
Kriterium Umsatz bei vergleichbaren Leistungen: Erklärung über den Umsatz des Unternehmens bezogen auf die letzten drei abgeschlossenen Geschäftsjahre, soweit er Bauleistungen und andere Leistungen betrifft, die mit der zu vergebenden Leistung vergleichbar sind, unter Einschluss des Anteils bei gemeinsam mit anderen Unternehmen ausgeführten Aufträgen. Die aufgestellte Forderung stellt keine Mindestanforderung im Hinblick auf die Dauer der Geschäftstätigkeit dar;
›
Minimum annual headcount
Kriterium Personelle Ausstattung: Erklärung über die Zahl der in den letzten 3 abgeschlossenen Kalenderjahren jahresdurchschnittlich beschäftigten Arbeitskräfte des Unternehmens, gegliedert nach Lohngruppen bzw. Qualifikationen mit gesondert ausgewiesenem tech… read in fullcollapse
Kriterium Personelle Ausstattung: Erklärung über die Zahl der in den letzten 3 abgeschlossenen Kalenderjahren jahresdurchschnittlich beschäftigten Arbeitskräfte des Unternehmens, gegliedert nach Lohngruppen bzw. Qualifikationen mit gesondert ausgewiesenem technischem Leitungspersonal. Die aufgestellte Forderung stellt keine Mindestanforderung im Hinblick auf die Dauer der Geschäftstätigkeit dar;
›
References: works
Kriterium Referenzen: Angabe von Referenzen über vergleichbare Leistungen die in den letzten bis zu 10 abgeschlossenen Kalenderjahren oder im aktuellen Jahr vor dem Schlusstermin für die Einreichung der Angebote ausgeführt und fertiggestellt (= abgenommen) wur… read in fullcollapse
Kriterium Referenzen: Angabe von Referenzen über vergleichbare Leistungen die in den letzten bis zu 10 abgeschlossenen Kalenderjahren oder im aktuellen Jahr vor dem Schlusstermin für die Einreichung der Angebote ausgeführt und fertiggestellt (= abgenommen) wurden. Hinsichtlich der Vergleichbarkeit wird auf die Kurzbeschreibung des Auftrags sowie die Vergabeunterlagen verwiesen. Die Referenzangaben beziehen sich auf folgende Aspekte: Vorlage von mindestens zwei vergleichbaren Referenzen, d.h. die Erstellung einer maschinellen Rauch- und Wärmeabzugsanlage (nach DIN EN 12101-3) mit einer Leistung von > 15 m³/s Rauchabzugsvolumen im Temperaturbereich > 200°C. Die Referenzen sollen folgende Angaben beinhalten: - Art, Leistung (Rauchabzugsvolumen) und Temperaturbereich der erstellten Anlage - Kurzbeschreibung der wesentlichen Komponenten der jeweiligen Anlage - erbrachter Leistungsumfang (Lüftungstechnik, Spannungsversorgung, Steuerung) - Randbedingungen/Komplexität der Leistungserbringung (ggf. Koordination mit gleichzeitig tätigen Unternehmen anderer Gewerke, beenge Platz- u. Logistikverhältnisse etc.) - Einbauort (Bauwerksart) der erstellten Anlage - Auftragssumme - Ausführungszeitraum (mit kalendarischer Angabe des Abnahmetermins) Möglicherweise geforderte Mindeststandards: mindestens zwei vergleichbare Referenzen, d.h. die Erstellung einer maschinellen Rauch- und Wärmeabzugsanlage (nach DIN EN 12101-3) mit einer Leistung von > 15 m³/s Rauchabzugsvolumen im Temperaturbereich > 200°C
›
Security/guarantee required
Requirement texts are quoted in the notice's original language — only the official wording is binding.

Tender documents — direct download

⤓
Annex 1
Specifications and annexes at the buyer — usually viewable without registration
⤓
Administrative conditions
The full notice, official wording

Who has won at this buyer so far

Across all contract types of this buyer — not just this sector. A city buys software and fire engines through the same purchasing office.

CompanyAwardsPeriod
STRABAG AG122016–2026
ISKA Infrastruktur GmbH92024–2026
Zausinger GmbH & Co. KG · München82013–2026
PRO BAU Ingenieur- und Rohrleitungsbau GmbH · Passau72025–2026
VTG GmbH Ingenieurbüro · Haar72024–2026
From the recorded awards · regular winners know this buyer's requirements — that is your competition.

How often this buyer tenders this kind of work

163
2019
115
2020
83
2021
123
2022
80
2023
221
2024
276
2025
216
2026
1,277 procedures in this category since 2019. Public procurement repeats itself — those who know the rhythm prepare instead of reacting.

Contracting authority contact

Websitewww.swm.de
·
Deadline — Friday 20 November at 12:00

Tactics

When this buyer has awarded in this sector, usually only one or two bids came in. A solid bid has a real chance here. (Based on 346 completed awards — not a statement about this procedure.)

This procedure allows 22 days between publication and deadline — typical in this country is 32 (median of 20,496 procedures). Much tighter than usual: the first week counts.

Foreign bidders

In Germany · Construction work, 687 contracts went to foreign companies over the last 3 years (of 244,229 recorded awards) — mostly from Austria, France, Poland.

Submission language: German.

Measured from linked award data; foreign winners bidding through a local subsidiary count as domestic — the true share is higher.

How to bid

Read the full notice — Original + documents
Goes directly to this tender on TED — Tenders Electronic Daily. The full specification and all annexes are there.
This procedure is published on 2 portals
All known sources are notice services. The buyer names the submission point in the notice itself.
Put together the evidence — in German
The 4 criteria on the left, plus your price.
Submit via TED — Tenders Electronic Daily before the deadline
Electronic submission — allow time for the portal registration the first time.
To the procurement portal (submission) →Official notice on TED →
We pull data from millions of notices. If the link here does not work, report it — we will find the right one.

Don't miss the next one

Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.

Register now