How to bid in this country: portals, deadlines, thresholds →
Acquisition of specialised training equipment
Szakmaspecfikus oktató eszközök beszerzése — original title
Your path to submission
- Deadline: 10 November at 10:00 — 9 days left.
- The submission point is stated in the notice (link on this page).
- Offer and evidence in: Hungarian.
- Collect your evidence — use the eligibility analysis on this page: it lists the requirements and, for known certificates, how to get them.
What the buyer is looking for
Acquisition of professional-specific training equipment in 9 parts as follows: Part 1 - Joinery machinery: 1. Fromatizing circular saw machine for cutting natural wood and agglomerated boards 1 pc 2. Formatting Circular Saw Machine for Cutting Agglomerated Sheets 1 pc 3. Band saw machine 1 pc 4. Straightening planer 1 pc 5. Thickness planer 1 pc 6. Contacting machine with a combi unit 1 pc 7. Compact CNC machining center 1 pc 8. Wood local extractor 2 pcs 9. Wood local extractor 2 pcs 10. Screw compressor assembly 1 pc 11. Compact Automatic Edge Cutting Machine Requires Milling and End Rounding Unit 1 pc Part 2 - CNC Training Lab: 1. CNC instructional machining center 1 pc 2. CNC instructional lathe 1 pc 3. CNC Programming, Training Room Design with 10 Workstations 1 Pcs Part 3 - Welding Simulator System: 1. Welding Simulator System Classroom Equipment with 6 Workstations (perpetual…
Show full description
… license) 2 pcs Part 4 - Automotive Mechatronic Electricity Lab: 1. Electrical circuit board 2 pcs 2. CAN bus network practical measuring station 2 pcs 3. HV de-voltage simulator 2 pcs 4. HV charging system simulator 2 pcs 5. HV battery assembly bench 2 pcs 6. HV battery simulator instructional measuring station 2 pcs 7. Pruned hybrid test vehicle 2 pcs 8. Hybrid and electric car diagnostic oscilloscope package 2 pcs 9. General car diagnostic oscilloscope package 2 pcs 10. Movable diagnostic station 4 pcs 11. Battery lab safety equipment package 2 pcs 12. Milliohm and electric motor tester 2 pcs 13. Vehicle technology online database annual subscription 6 pcs 14. Digital vehicle technology curriculum annual subscription 6 pcs 15. Insulated tool set 2 pcs Part 5 - Injector test bench with accessories Diesel common rail injector test bench - with adapters 1 pcs Part 6 - Mini rotary excavator Mini rotary excavator (with accessories) 1 pcs Part 7 - VR development lab 1. VR Development Environment 11 Pcs Part 8 - Get 3D Scanners 1. 3D Scanner - 1 x Part 9 - Get Laser Engraving and Cutting Machine 1. Laser engraving and cutting machine 1 pc When defining the technical specifications, where the brand name (or make, country, etc.) is indicated, it is the 321/2015. In accordance with Section 46(3) of the Government Decree, the goods were clearly defined in terms of quality. An equivalent product may be recommended instead of the designated brand. · Part 1 - Joinery machines: 1. Fromatizing circular saw machine for cutting natural wood and agglomerated boards 1 pc 2. Formatting Circular Saw Machine for Cutting Agglomerated Sheets 1 pc 3. Band saw machine 1 pc 4. Straightening planer 1 pc 5. Thickness planer 1 pc 6. Contacting machine with a combi unit 1 pc 7. Compact CNC machining center 1 pc 8. Wood local extractor 2 pcs 9. Wood local extractor 2 pcs 10. Screw compressor assembly 1 pc 11. Compact automatic edge locking machine required with milling and end-rounding unit 1 pc The technical specifications of each item are included in the technical specification due to character limit. For each lot, for the product offered, the manufacturer and the type are mandatory in the place indicated in the header of the data sheet, taking into account that the technical specification data sheet is a technical offer. Mandatory services included in the price related to the transport of machines: • Inserting machines into the installation site • Installing the machines, for which the necessary connections are built by the Customer. • Complete commissioning of machines, conducting trial operation • Warranty: according to the offer, at least 12 months after delivery, installation, commissioning and trial operation of the equipment at the place of performance. The Seller is obliged to deliver the goods to the place specified by the Buyer in the order, which is the place specified by the Buyer in the order, and the Buyer is obliged to take over the goods upon delivery. The Buyer is obliged to take over the goods upon delivery. When defining the technical specifications, where the brand name (or make, country)
Contract
Type of service
Clement What the numbers say about this buyer
- The median procedure drew 5 bids (7 procedures with a bid count); 0% ended with a single bidder. Sector: median 2 bids.n = 7
- 0% of the bids received came from other countries (7 procedures with a bid mix) — all bidders, not just the winners. Sector: 2%.n = 7
- 94% of the bids received came from small and medium-sized enterprises (7 procedures with a bid mix). Sector: 90%.n = 7
From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 01/11/2026.
What you must prove — eligibility criteria
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Előzetes igazolási mód: Az ajánlattevőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése értelmében azEEKD IV.rész "alfa" mező kitöltésével kell előzetesen igazolnia alkalmasságát, hogy megfelel az ajánlatkérő általmeghatározott alkalmassági követelmén… read in fullcollapse
Tender documents — direct download
Who has won at this buyer so far
Across all contract types of this buyer — not just this sector. A city buys software and fire engines through the same purchasing office.
| Company | Awards | Period |
|---|---|---|
| HÓD Industrial Solutions Korlátolt Felelősségű Társaság | 1 | 2025 |
| Haberkorn Műszaki Termékeket Gyártó és Forgalmazó Korlátolt Felelősségű Társaság | 1 | 2025 |
| Kvint-R Irodatechnikai és 3D Nyomtatási Kft. | 1 | 2025 |
| Materiál 04 Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság | 1 | 2025 |
| H-Didakt Kereskedelmi és Szolgáltató Kft. | 1 | 2025 |
How often this buyer tenders this kind of work
Tactics
When this buyer has awarded in this sector, usually 5 or more bids came in. Many compete here — price and references decide. (Based on 6 completed awards — not a statement about this procedure.)
This procedure allows 13 days between publication and deadline — typical in this country is 30 (median of 683 procedures). Much tighter than usual: the first week counts.
Foreign bidders
In Hungary · Industrial machinery, 36 contracts went to foreign companies over the last 3 years (of 525 recorded awards) — mostly from Croatia, Germany, Italy.
Submission language: Hungarian.
How to bid
Don't miss the next one
Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.
Register now