Friedrich & ClementBETA

How to bid in this country: portals, deadlines, thresholds →

Cold Terminals for SIS100 QDM

Cold Terminals für SIS100 QDM — original title

DEGermany · Darmstadt

Your path to submission

  1. Deadline: 2 November at 12:00 — 1 day left.
  2. The submission point is stated in the notice (link on this page).
  3. Offer and evidence in: German.
  4. Collect your evidence — use the eligibility analysis on this page: it lists the requirements and, for known certificates, how to get them.
Compiled automatically from notice and documents — no guarantee; the procedure's wording is binding.

What the buyer is looking for

The Contractor (AN) shall not exceed 532 pcs. Build cold terminals of superconducting material for operation in the SIS100 particle accelerator, which is part of the international FAIR project. The power adapters are components of power supplies for SIS100 correction magnets. They are designed for an operating current of 250 A and are to be operated at an operating temperature of approximately 4.5 K. The adapter connects the high-temperature superconductor power supply to the solenoid coil, which is made of a NiTi wire. It consists of two parts that are glued together with a thin layer of fiberglass composite. This layer represents a thermal coupling of the current-carrying part to the cooling line and electrically insulates it against the ground. The current-carrying part consists of a copper carrier with soldered superconductor. The adapters are available in two versions with the…

Show full description

… contact plate on the left or right. Production is carried out according to drawings provided by the customer (AG). The Factory Acceptance Test is carried out individually for each adapter and includes high-voltage tests as well as a test in liquid nitrogen below the operating current of up to 300 A DC. These tests shall be carried out by the AN in accordance with the specifications of the WG.

Machine translation (EU eTranslation) — official wording via the PDF link.

Contract

TypeSupplies
Estimated valuevalue not published
Published22 Oct 2026
ProcedureOpen procedure
Place of performanceDarmstadt
Framework agreementReserved for SMEs

Type of service

31 · Electrical machinery
CPV 31643000

Clement What the numbers say about this buyer

  • In this sector the buyer awards roughly every 2 months (91 awards, most recently October 2026) — the next award is due around December 2026 by that rhythm. The last award went to JHengineering.n = 91
  • 39% of this buyer's awards went to companies that had already won here before (600 awards since 2017, spread over 362 companies). 61% went to new names.n = 600 awards since 2017
  • 5% of the bids received came from other countries (31 procedures with a bid mix) — all bidders, not just the winners. Sector: 17%.n = 31
  • The award came in at a median 75% of the estimated value (17 awards with both estimate and value) — pricing at the estimate is usually too high here. Sector: 85%.n = 17
  • The median procedure drew 2 bids (504 procedures with a bid count); 40% ended with a single bidder. Sector: median 2 bids.n = 504

From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 01/11/2026.

Clement
In this buyer's last 113 comparable contracts (same sector), usually only a single offer came in — a solid bid has real chances.
References and certificates from your home country count fully across the EU — that is what European procurement law is for.

What you must prove — eligibility criteria

›
Professional liability insurance
Eigenerklärung Betriebs-/Berufshaftpflicht (Mit dem Angebot; Mittels Eigenerklärung): Die Deckungssumme hat mindestens den xxxxxxx Auftragswert abzusichern.
›
Other economic requirement
Eigenerklärung Bietergemeinschaft (Mit dem Angebot; Mittels Dritterklärung): BGB-Gesellschaft mit gesamtschuldnerischer Haftung mit Listung aller Mitglieder und deren bevollmächtigter Vertreter inkl. Nennung eines bevollmächtigten Vertreters, der die Arbeitsge… read in fullcollapse
Eigenerklärung Bietergemeinschaft (Mit dem Angebot; Mittels Dritterklärung): BGB-Gesellschaft mit gesamtschuldnerischer Haftung mit Listung aller Mitglieder und deren bevollmächtigter Vertreter inkl. Nennung eines bevollmächtigten Vertreters, der die Arbeitsgemeinschaft gegenüber dem Auftraggeber rechtsverbindlich vertritt. Mit dem Teilnahmeantrag / Angebot ist eine von allen Gemeinschaftsmitgliedern rechtsverbindlich unterschriebene Erklärung abzugeben, dass die federführende Firma als bevollmächtigter Vertreter die aufgeführten Gemeinschaftsmitglieder gegenüber dem Auftraggeber vertritt und mit Wirkung für jedes Mitglied für die vertragsgemäße Ausführung der Leistung als Gesamtschuldner haftet.
›
Independent quality certificate (e.g. ISO 9001)
Eigenerklärung ISO 9001 (Mit dem Angebot; Mittels Eigenerklärung): Eigenerklärung zur Einhaltung der Normen im Sinne der ISO 9001 (oder einer gleichwertigen Norm von akkreditierten Stellen zertifiziert)
›
Share of subcontractors
Eigenerklärung Unterauftragnehmer (Mit dem Angebot; Mittels Eigenerklärung): Nur auszufüllen, sofern Teilleistungen an Unterauftragnehmer weitergegeben werden oder sofern sich der Bewerber bzw. Bieter für den Eignungsnachweis auf einen Unterauftragnehmer beruf… read in fullcollapse
Eigenerklärung Unterauftragnehmer (Mit dem Angebot; Mittels Eigenerklärung): Nur auszufüllen, sofern Teilleistungen an Unterauftragnehmer weitergegeben werden oder sofern sich der Bewerber bzw. Bieter für den Eignungsnachweis auf einen Unterauftragnehmer beruft. In diesem Fall ist eine Abgabe zusammen mit dem Teilnahmeantrag bzw. Angebot erforderlich! Weiterhin ist im Falle der Eignungsleihe eine Verfügbarkeitserklärung (siehe Formblatt Verfügbarkeitserklärung) vom Unterauftragnehmer bereits mit dem Teilnahmeantrag bzw. Angebot einzureichen. Im Falle der Ausführung von Teilen des Auftrags wird diese vor Zuschlagserteilung nachgefordert.
›
Other economic requirement
Eigenerklärung zur Verordnung (EU) 833/2014 (Mit dem Angebot; Mittels Eigenerklärung): Am 08.04.2022 hat der Rat der Europäischen Union die Verordnung (EU) 2022/576 zur Änderung der Verordnung (EU) Nr. 833/2014 über restriktive Maßnahmen angesichts der Handlun… read in fullcollapse
Eigenerklärung zur Verordnung (EU) 833/2014 (Mit dem Angebot; Mittels Eigenerklärung): Am 08.04.2022 hat der Rat der Europäischen Union die Verordnung (EU) 2022/576 zur Änderung der Verordnung (EU) Nr. 833/2014 über restriktive Maßnahmen angesichts der Handlungen Russlands, die die Lage in der Ukraine destabilisieren, erlassen. Diese ist am 09.04.2022 in Kraft getreten. Sie entfaltet als Verordnung unmittelbare Rechtswirkung in den Mitgliedstaaten und hat direkte Auswirkungen auf die Vergabe öffentlicher Aufträge und Konzessionen.
›
References: supplies
Referenzen (Mit dem Angebot; Mittels Eigenerklärung): Beschreibung von drei vergleichbaren Referenzprojekten, mit Angabe der auf dem GSI / FAIR Formblatt abgefragten Projektdaten. Die Bieter müssen folgende Voraussetzungen erfüllen: - Nachweisbare Erfahrungen … read in fullcollapse
Referenzen (Mit dem Angebot; Mittels Eigenerklärung): Beschreibung von drei vergleichbaren Referenzprojekten, mit Angabe der auf dem GSI / FAIR Formblatt abgefragten Projektdaten. Die Bieter müssen folgende Voraussetzungen erfüllen: - Nachweisbare Erfahrungen mit der prozesssicheren Verarbeitung von Epoxy-Klebstoffen und der reproduzierbaren und prozesssicheren Lötung von Hochtemperatur-Supraleitern. - Nachweisbare Erfahrungen mit Umgang mit flüssig Stickstoff und mit Testen von supraleitenden Materialien bei tiefen Temperaturen. - Nachweisbare Erfahrungen mit Isolationsmessungen bei Gleichspannungen bis 1500 V.
›
Other economic requirement
Weitere Angaben zum Bieter (Mit dem Angebot; Mittels Eigenerklärung): Im Zuge der Einführung neuer Anforderungen für EU-weit vergebene Aufträge (sog. eForms) sind öffentliche Auftraggeber ab dem 25.10.2023 verpflichtet, in Vergabebekanntmachungen (bisher Bekan… read in fullcollapse
Weitere Angaben zum Bieter (Mit dem Angebot; Mittels Eigenerklärung): Im Zuge der Einführung neuer Anforderungen für EU-weit vergebene Aufträge (sog. eForms) sind öffentliche Auftraggeber ab dem 25.10.2023 verpflichtet, in Vergabebekanntmachungen (bisher Bekanntmachung über vergebene Aufträge) die unten aufgeführten Angaben zu den Auftragnehmern veröffentlichen. Vor diesem Hintergrund sind für jeden Bieter und bei Bietergemeinschaften für jedes Mitglied der Bietergemeinschaft die im entsprechenden Formblatt aufgeführten Angaben zu machen und mit dem Angebot, im Fall vorgelagerter Teilnahmewettbewerbe mit dem Teilnahmewettbewerb einzureichen.
›
Other economic requirement
Unternehmensdarstellung (Mit dem Angebot; Mittels Eigenerklärung): a) Unternehmensdaten allgemein b) Mitarbeiterzahl gesamt sowie Aufschlüsselung der Mitarbeiterzahl für die letzten 3 Geschäftsjahre: - Verwaltung - Entwicklung / Konstruktion - Produktion
Requirement texts are quoted in the notice's original language — only the official wording is binding.

Tender documents — direct download

⤓
Annex 1
Specifications and annexes at the buyer — usually viewable without registration
⤓
Administrative conditions
The full notice, official wording

Who has won at this buyer so far

Across all contract types of this buyer — not just this sector. A city buys software and fire engines through the same purchasing office.

CompanyAwardsPeriod
Siemens AG102012–2026
Enercity AG · Hannover102012–2026
EAB Elektroanlagenbau GmbH Rhein/Main · Dietzenbach92023–2025
ILK Dresden · Dresden82014–2026
Babcock Noell GmbH · Würzburg82012–2023
From the recorded awards · regular winners know this buyer's requirements — that is your competition.

How often this buyer tenders this kind of work

26
2019
43
2020
37
2021
49
2022
41
2023
141
2024
86
2025
48
2026
471 procedures in this category since 2019. Public procurement repeats itself — those who know the rhythm prepare instead of reacting.

Contracting authority contact

Websitewww.gsi.de
·
Deadline — Monday 2 November at 12:00

Tactics

When this buyer has awarded in this sector, there was usually a single bid in the end. A solid bid has a real chance here. (Based on 113 completed awards — not a statement about this procedure.)

This procedure allows 12 days between publication and deadline — typical in this country is 32 (median of 20,496 procedures). Much tighter than usual: the first week counts.

The deadline falls on a Monday — your last full working day is the Friday before. Have evidence and guarantees together by Thursday.

Foreign bidders

In Germany · Electrical machinery, 225 contracts went to foreign companies over the last 3 years (of 5,970 recorded awards) — mostly from Italy, Austria, Netherlands.

Submission language: German.

Measured from linked award data; foreign winners bidding through a local subsidiary count as domestic — the true share is higher.

How to bid

Guide: how to apply on cosinex Vergabemarktplatz / DTVP → Registration, signature, fees — from the operator's bidder manual.

Read the full notice — Original + documents
Goes directly to this tender on TED — Tenders Electronic Daily. The full specification and all annexes are there.
This procedure is published on 2 portals
All known sources are notice services. The buyer names the submission point in the notice itself.
Put together the evidence — in German
The 8 criteria on the left, plus your price.
Submit via TED — Tenders Electronic Daily before the deadline
Electronic submission — allow time for the portal registration the first time.
To the procurement portal →Official notice on TED →
We pull data from millions of notices. If the link here does not work, report it — we will find the right one.

Don't miss the next one

Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.

Register now