Femtosekunden-Lasersystem (6 Lose)
Germany · Ilmenau · how to bid here →
Your path to submission
- Deadline: 3 November at 09:29 — 31 days left.
- The submission point is stated in the notice (link on the right).
- Offer and evidence in: DEU, DEU, DEU, DEU, DEU, DEU.
- Collect your evidence — use the eligibility analysis above: it lists the requirements and, for known certificates, how to get them.
Clement What the numbers say about this buyer
- In this sector the buyer awards roughly every 2 months (57 awards, most recently July 2026) — by that rhythm the next award was due around September 2026. The last award went to WE are XR GmbH.n = 57
- 64% of this buyer's awards went to companies that had already won here before (108 awards since 2023, spread over 37 companies). That is well above the sector norm (40%) — newcomers have a harder time here than elsewhere.n = 108 awards since 2023
- The median procedure drew just one bid (105 procedures with a bid count); 70% ended with a single bidder. Sector: median 1 bids.n = 105
- 1% of awards went to companies from abroad (108 awards with a known winner country). Sector average: 5%.n = 108
- Across 8 procedures with structured selection criteria, this buyer most often required: Professional register enrolment (8 of 8), Minimum number of managers (8 of 8), Share of subcontractors (8 of 8), Average minimum annual turnover (8 of 8).n = 8
From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 02/10/2026.
Foreign bidders
In Germany · Laboratory & optical equipment, 565 contracts went to foreign companies over the last 3 years (of 12,382 recorded awards) — mostly from France, Netherlands, United Kingdom.
Submission language: DEU.
Typical field: median 1 (from 58 awards).
What the buyer is looking for
A system for measuring fs-time-resolved ellipsometry, time-resolved photon statistics and time-resolved photoluminescence is required. A pump laser is available, which provides laser pulses of about 200 fs length with a pulse energy of up to 1 mJ The following components are required: 1. Generation of ultra-short laser pulses: Using the laser pulses provided by the existing laser (Light Conversion PHAROS 2 SP, see specifications in Table 3.3) (pulse length approx. 200 fs, pulse energy up to 1 mJ), two types of pulses are to be generated: 1) Broadband white light pulse (WL) in the spectral range 350 nm - 1250 nm (1 eV - 3.5 eV) with maximum chirp over the required wavelength range of 2 ps 2) Pulse (PUMP) with low bandwidth in the spectral range 250 nm - 1500 nm, wherein at pulses of no more than 50 nm bandwidth, selected from the usable wavelength range, compressibility to 50 fs pulse…
Show full description
… duration or shorter is given This could be done, for example, by compressing the laser pulses provided by the existing laser from about 200 fs (see Table 3.3) to 35 fs pulse duration or shorter (COMP) with subsequent generation of the pulses WL and PUMP. 2. Delay line: Motorized linear table (DL) with at least 1 m travel and repeatability of 1 μm or better 3. Polarization, focusing and mirror optics, opto-mechanics (see Figure 3.1): 1) Pump-sample ellipsometry optics (ELLI): Optical components and optomechanical brackets for the realization of automated ellipsometry measurements (motorized brackets, linear polarization and retarder components), as well as management of the pump sample beam guidance (reflection mirrors, off-axis parabolic mirrors, collimation lenses, mounting rails) and attachment of the sample. 2) Cube Corner Retroreflector (RR) with usable wavelength range 250-1500 nm. Details including sketches and tables in section 3. Microscope Lens (MO): with a working distance of at least 10 mm and a numerical aperture of 0.4 or better, usable wavelength range of at least 350-1250 nm 5. Detection optics: Monochromator and spectrograph (MC) with one port each for CCD line detector and output column 6. CCD line detector (CCD) with readout rate 1 kHz or better
What you must prove — eligibility criteria
Nachweis über die technische und berufliche Leistungsfähigkeit durch Abgabe der EEE Teil IV Abschnitt C (Hinweis: bezogen auf die letzten 3 abgeschlossenen Geschäftsjahre) Im Formblatt „EEE-EuropäischeEigenerklärung“ - Angaben zu Ausbildungsnachweisen oder Bes… ▸▾
Nachweis über die technische und berufliche Leistungsfähigkeit durch Abgabe der EEE Teil IV Abschnitt C und D (Hinweis: bezogen auf die letzten 3 abgeschlossenen Geschäftsjahre) Im Formblatt „EEE-EuropäischeEigenerklärung“ - Angaben zu Umweltmanagementmaßnahme… ▸▾
Contract
Who has won here before
| Company | Awards | Period |
|---|---|---|
| sysGen gmbh · Bremen | 6 | 2024–2026 |
| FEI Deutschland GmbH | 6 | 2025 |
| InfraTec GmbH · Dresden | 5 | 2025 |
| Werth Messtechnik GmbH · Gießen | 5 | 2025 |
| Rittal GmbH & Co. KG · Herborn | 4 | 2024 |
How often this buyer tenders this
Who knows the rhythm prepares instead of reacting.
How to bid
Guide: how to apply on e-Vergabe des Bundes (evergabe-online.de) → Registration, signature, fees — from the operator's bidder manual.