Friedrich & ClementBETA

Bútorok beszerzése dinamikus beszerzési rendszer

Hungary · Szeged · how to bid here →

Your path to submission

  1. Deadline: 22 June 2027 at 10:00 — 262 days left.
  2. The submission point is stated in the notice (link on the right).
  3. Offer and evidence in: HUN.
  4. Collect your evidence — use the eligibility analysis above: it lists the requirements and, for known certificates, how to get them.
Compiled automatically from notice and documents — no guarantee; the procedure's wording is binding.

Clement What the numbers say about this buyer

  • In this sector the buyer awards roughly every 2 months (28 awards, most recently January 2026) — by that rhythm the next award was due around March 2026. The last award went to SAMTEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság.n = 28
  • 25% of the bids received came from other countries (488 procedures with a bid mix) — all bidders, not just the winners. Sector: 0%.n = 488
  • 31% of this buyer's awards went to companies that had already won here before (715 awards since 2013, spread over 265 companies). 69% went to new names.n = 715 awards since 2013
  • The median procedure drew 4 bids (669 procedures with a bid count); 21% ended with a single bidder. Sector: median 4 bids.n = 669
  • 8% of awards went to companies from abroad (715 awards with a known winner country). Sector average: 2%.n = 715

From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 28/09/2026.

Clement
References and certificates from your home country count fully across the EU — that is what European procurement law is for.

Foreign bidders

In Hungary · Furniture & furnishings, 2 contracts went to foreign companies over the last 3 years (of 392 recorded awards).

Typical field: median 6 (from 28 awards).

Measured from linked award data; foreign winners bidding through a local subsidiary count as domestic — the true share is higher.

What the buyer is looking for

Establishment of a dynamic purchasing system, the subject of which is “Procurement of furniture under a dynamic purchasing system for the University of Szeged” for a period of 60 months. The contracting authority shall describe in the Public Procurement Documents the categories of products and their characteristics for the implementation of which it intends to establish a dynamic purchasing system (hereinafter referred to as DBR) for the purchase of furniture. During the implementation of the DBR, the contracting authority shall apply the provisions of the Public Procurement Act. Pursuant to Section 107(2), the exact technical specifications and specific contractual conditions for the specific public procurements to be implemented in the system shall be made available to the Tenderers participating in the DBR at the same time as the invitation to tender is sent in the bidding phase. The…

Show full description

… contracting authority shall make the most relevant contractual terms and conditions applicable to each tendering stage available during this participatory stage. The estimated value of the purchases concerned by the DBR, i.e. the estimated quantity of DBR, is planned to be HUF 407 070 740 net for the entire 48-month period of DBR. The estimated quantity/value set out in the DBR was determined for information purposes, on the basis of the experience of previous years, from which the contracting authority adopted the Public Procurement Act. Pursuant to Section 107(2), DBR may deviate during its term in accordance with its specific procurement needs. Product categories as defined in the DBR and their characteristics: 1. Office furniture: Office Desks, Office Cabinets, Storage Furniture, Office Seats, Other Furniture for Office Use Not Listed 2. Educational furniture: Student tables, Student seating, Wall boards, board systems, other furniture for educational use not listed 3. Lab Furniture: Laboratory work tables, Laboratory sink (“Water block”), Laboratory cabinets, Laboratory seating, other furniture for laboratory use not listed 4. Sanitary furniture: Cloakroom lockers, Nurse desks, Nurse counters, other furniture for medical use not listed 5. Dormitory furniture: Wardrobes, dining tables, chairs, couches, sofas, other furniture for dormitories not listed 6. Furniture transformation: Overhead costs for repair and maintenance work related to the repair and alteration of furniture 7. Furniture installation: Overhead costs for installation works related to the assembly of furniture and the installation of wall boards Under the product categories above, the contracting authority is the Public Procurement Act. It means a category within the meaning of Section 106(4). The procurement includes for categories 1 to 5: the procurement of furniture classified in product categories, and, where appropriate, the performance of ancillary tasks related to the procurement (transport, material handling, other tasks related to the procurement that will be precisely defined at the tender stage), as set out in detail in the technical specifications to be defined at the tender stage. During the bidding phase, the tenderer is obliged to offer the contracting authority new/unused products suitable for their intended use. The contracting authority does not offer the possibility to offer second-hand (or even refurbished) products. The procurement includes for categories 6-7: Acquisition/ordering of furniture transformation, repair and installation services related to furniture already owned by the contracting authority, where applicable, performing ancillary tasks related to the procurement (transport, material handling, other tasks related to the procurement that will be precisely defined at the tender stage) as detailed in the technical specifications to be defined at the tender stage. Contracting authority is the Public Procurement Act. Pursuant to Section 107(2), it maintains the possibility that, during the implementation of the DBR, at the same time as the invitation to tender is sent, depending on the subject-matter and nature of the specific public procurements, partial tendering options may be specified in the invitation to tender for the specific procurement need contained therein.

Machine translation (EU eTranslation) — official wording via the PDF link.

What you must prove — eligibility criteria

›
References: supplies
A 321/2015. (X. 30.) Kr. II. Fejezetnek megfelelően az EEKD IV. rész α) pontjának kitöltésével elegendő nyilatkoznia Részvételi jelentkezőnek arról, hogy megfelel az M/1 pontban előírt alkalmassági követelményeknek. Az alkalmassági követelményekre vonatkozó ig… ▸▾
A 321/2015. (X. 30.) Kr. II. Fejezetnek megfelelően az EEKD IV. rész α) pontjának kitöltésével elegendő nyilatkoznia Részvételi jelentkezőnek arról, hogy megfelel az M/1 pontban előírt alkalmassági követelményeknek. Az alkalmassági követelményekre vonatkozó igazolásokat az ajánlatkérő felhívására szükséges benyújtani, a Kbt. 69. §. (4)-(6) bekezdésében foglaltak alapján. M/1: A Révételre Jelentkezőnek a 321/2015. (X. 30.) Korm. rendelet 1. § (1) bekezdése és 21. §-ának előírásai szerint a szerződés teljesítéséhez szükséges műszaki, illetőleg szakmai alkalmasságát az alábbiak szerint kell igazolnia. Ajánlatkérő az EEKD kitöltésével történő előzetes igazolás során elfogadja az érintett gazdasági szereplő egyszerű nyilatkozatát – IV. rész α pont kitöltésével – részletes információk kérése nélkül. A Kbt. 69. § (4)-(7) bekezdése alapján felhívott ajánlattevők az alkalmassági feltételnek való megfelelésüket az alábbiak szerint kötelesek igazolni: - a teljesítés ideje (kezdő és befejező időpontja év/hó/nap pontossággal), - a szerződést kötő másik fél megnevezése, - a szállítás tárgya (oly módon, hogy abból az alkalmassági előírásoknak való megfelelés megállapítható legyen, a felhívás II.2.4) pontja szerinti kategóriába sorolást megadva), - a szállítás ellenértéke (nettó HUF), - továbbá nyilatkozni kell arról, hogy a teljesítés az előírásoknak és a szerződésnek megfelelően történt-e. Az ajánlatkérő a vizsgált időszak alatt befejezett, de legfeljebb hat éven belül megkezdett szolgáltatásokat veszi figyelembe. /321/2015. (X. 30.) Korm. rendelet 21. § (1a) bek./ Ajánlatkérő felhívja a figyelmet a 321/2015. (X.30.) Kr. 22. § (1)-(2) bekezdéseire. A referenciaigazolásokat/referencianyilatkozatokat úgy kell kiállítani, hogy azokból az alkalmassági feltételek teljesülése ellenőrizhető legyen. Amennyiben a bemutatott referencia tárgya bővebb, mint a közbeszerzés tárgya, akkor a referencianyilatkozatban/referenciaigazolásban meg kell adni az alkalmassági követelményekre vonatkozó részmennyiséget/értékeket, illetve műszaki tartalmat. Ajánlatkérő felhívja a figyelmet a Korm. rendelet 24. § (1) bekezdésére. Az előírt alkalmassági követelménynek Ajánlattevők a Kbt. 65. § (6)-(7) és (9), (11) bekezdésében foglaltak betartása mellett együttesen, illetve bármely más szervezet vagy személy kapacitására támaszkodva is megfelelhetnek. Az alkalmasság minimumkövetelménye(i): (M/1.): Alkalmatlan a Részvételre jelentkező, ha nem rendelkezik az eljárást megindító felhívás feladásától* visszafelé számított 36 hónap során teljesített: Összességében legalább nettó 1 millió Ft értékű, az ajánlati felhívás II.2.4. pontja szerinti termékkategóriák valamelyikébe sorolható közbeszerzés tárgya szerinti (bútorok értékesítésére és/vagy gyártására vonatkozó) referenciával. (A 321/2015. (X. 30.) Kr. 22. § (3a) pontja alapján, figyelemmel arra, hogy a DBR jellegéből adódóan mennyiségi meghatározás nem alkalmazható.) Az előírt referenciakövetelmény több, de legfeljebb kettő szállításból származó referenciával igazolható, amely referenciák egy vagy több az Ajánlatkérő által meghatározott kategóriából származó teljesítést igazolhatnak, amennyiben az megfelel a közbeszerzés tárgyának (bútorok értékesítése és/vagy gyártása). * Az vizsgált időpont vagy időszak meghatározására minden esetben a Kbt. 107. § (8b) bekezdés tekintendő irányadónak. A részvételi jelentkezések során a referencia vizsgált időtartamára tehát a Kbt. 107. § (8b) bekezdésében foglaltak irányadóak.
Requirement texts are quoted in the notice's original language — the official wording is binding.

Contract

BuyerSzegedi Tudományegyetem
TypeSupplies
Estimated valuevalue not published
Published4 June 2026
CategoryFurniture & furnishings · CPV 39100000

Who has won here before

CompanyAwardsPeriod
UniCorp Biotech Kft.122024–2026
Medtronic Hungária Kereskedelmi Korlátolt Felelősségű Társaság92024–2026
ETIAM Korlátolt Felelősségű Társaság92023–2026
RK Tech Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság82023–2025
B. Braun Trading Kft.62025–2026
From 18.0M documented awards · regular winners know this buyer's requirements — that is your competition.

How often this buyer tenders this

20247
202511
20267

Who knows the rhythm prepares instead of reacting.

·
days until the deadline — Tuesday, 22 June 2027 at 10:00

How to bid

Read the full notice — Original + documents
Goes directly to this tender on TED — Tenders Electronic Daily. The full specification and all annexes are there.

Tender documents — direct download

Specifications and annexes hosted by the buyer — usually accessible without registration.
Friedrich finds tenders like this for you — every morning at 7:30, and he learns from your feedback.
Register now →