Friedrich & ClementBETA

Supply, transport, installation and equipment of 4 insulated storage containers

Dostawa, transport, posadowienie oraz wyposażenie ocieplanych kontenerów magazynowych w ilości 4 sztuk

Poland · Celestynów · how to bid here →

Your path to submission

  1. Deadline: 8 October at 11:00 — 2 days left.
  2. You submit on eZamówienia — not here and not by e-mail. ↗ Submission via eZamówienia: account required; above the EU threshold a qualified signature, nationally the 'trusted signature' often suffices — check the wording. Sort out account and signature first — not on submission day.
  3. Collect your evidence — the eligibility requirements are listed above; for many of them the analysis explains how to obtain them.
Compiled automatically from notice and documents — no guarantee; the procedure's wording is binding.

Clement What the numbers say about this buyer

  • In this sector the buyer awards roughly every 2 months (6 awards, most recently March 2026) — by that rhythm the next award was due around May 2026. The last award went to PM Digital sp. z o. o..n = 6
  • 49% of this buyer's awards went to companies that had already won here before (214 awards since 2015, spread over 92 companies). That is well above the sector norm (31%) — newcomers have a harder time here than elsewhere.n = 214 awards since 2015
  • The median procedure drew 4 bids (21 procedures with a bid count); 19% ended with a single bidder. Sector: median 1 bids.n = 21
  • 2% of awards went to companies from abroad (214 awards with a known winner country). Sector average: 1%.n = 214

From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 04/10/2026.

Clement
When comparable contracts were last awarded here, usually just a single offer was on the table — a solid bid has real chances.
References and certificates from your home country count fully across the EU — that is what European procurement law is for.

Foreign bidders

In Poland · Software & IT systems, 65 contracts went to foreign companies over the last 3 years (of 16,009 recorded awards) — mostly from Germany, Czechia, Croatia.

Typical field: median 1 (from 3,585 awards).

Measured from linked award data; foreign winners bidding through a local subsidiary count as domestic — the true share is higher.

What the buyer is looking for

1. The subject of the contract is the delivery, transport, foundation and equipment of insulated storage containers in the amount of 4 pieces, intended for storing equipment, materials and means necessary to perform tasks in the field of civil protection, civil defence and crisis management. 2. Scope of the subject of the contract: 1) Container technical requirements The container should meet at least the following requirements: a)Construction and insulation • Container brand new, unused, intended for storage purposes. • Container construction made in such a way as to ensure adequate rigidity, durability and resistance to weather conditions. • The container should be insulated, with thermal insulation of walls, roof and floor. • The walls, roof and floor should be insulated to reduce heat loss and protect the stored equipment from adverse weather conditions. • The outer plating should be…

Show full description

… made of materials resistant to corrosion and weather conditions. • The floor should have a structure enabling safe storage of materials and storage equipment, including EURO pallets. • desired external dimensions min: 5.0 × 2.5 m • inner colour: white or light grey (RAL 9010 or similar) • external colour: grey/anthracite (RAL 7016 or similar). b) Electrical installation The container should be equipped with a complete electrical installation prepared to connect an external power source, the installation should include at least: • two lighting points inside the container, equipped with LED luminaires; • two 230 V electrical sockets, arranged in a way that allows convenient use of electrical equipment; • one three-phase power socket with a rated current of at least 16 A; • an electrical switchgear equipped with appropriate overcurrent and residual current protection; • connection point to connect the container to an external source of electricity; • installation carried out in accordance with the applicable rules and principles of technical knowledge; • air conditioner min. 3.0 kW; • The electrical installation should be made in such a way that it can be safely used and connected to an external power source, e.g. a power generator or power grid. (c) The Container window should be equipped with a tilt-and-tilt window that meets the following requirements: • the window shall be openable to the outside; • the window should be made in a technology that ensures adequate thermal insulation; • the window should be equipped with a burglar blind; • the roller blind should ensure that the window opening is effectively protected against unauthorised access; • Minimum window dimensions: 80x100 cm. • One Way Vision window. d) Door openings The container shall have two independent door openings: • Employee entrance door The first door opening should allow the employee to enter and exit freely, the door should be:  full and insulated,  equipped with a lock providing the possibility of locking,  resistant to weather conditions,  equipped with appropriate seals. • Warehouse door/gate The second door opening shall have a width permitting the entry of the forklift truck together with the euro pallet, the opening shall in particular allow:  forklift entry,  transport and handling of euro pallet,  safe loading and unloading of equipment. Warehouse doors/gates should be made in such a way as to ensure safety of use, proper durability and protection of the warehouse against unauthorized access. It is recommended that the usable width of this hole should be 2.0 m and its height should be adjusted to the parameters of a typical forklift truck with a Euro pallet being transported. 2) Transport and installation The Contractor is obliged to: a) delivery of the container at its own expense and risk to the place indicated by the Ordering Party; b) ensure the appropriate

Machine translation (EU eTranslation) — official wording via the PDF link.

Contract

BuyerGMINA CELESTYNÓW
TypeServices
Estimated valuenot published — common for below-threshold procedures
Published30 September 2026
CategorySoftware & IT systems · CPV 48820000-2

Who has won here before

CompanyAwardsPeriod
TOMIRAF Sp. z o.o. Sp. k.282021–2026
BUDMAX Sp. z o.o.192021–2025
Zające-Darkop Dariusz Zając72021–2026
PreZero Service Centrum Sp. z o.o.52019–2026
„MM-Projekt” Projektowanie i konsulting w Inżynierii Lądowej Michał Michniewicz52021–2026
From 18.0M documented awards · regular winners know this buyer's requirements — that is your competition.

How often this buyer tenders this

20253
20263

Who knows the rhythm prepares instead of reacting.

·
days until the deadline — Thursday 8 October at 11:00

How to bid

Guide: how to apply on e-Zamówienia (Polen) → Registration, signature, fees — from the operator's bidder manual.

Read the full notice — Original + documents
Goes directly to this tender on eZamówienia. The full specification and all annexes are there.
Friedrich finds tenders like this for you — every morning at 7:30, each one checked by Claude (Anthropic) for fit, and he learns from your feedback what your company really does.
Register now →