Supply of a brand new agricultural tractor for Miejski Zakład Komunalny Sp. z o.o. in Leżajsk

… (13)a system enabling the set engine speed to be set and maintained; (14)Viscous fan; 2. Electrical installation 1)alternator with a capacity of at least 120 A; 2) a battery with a capacity of at least 140 Ah; 3)a system that allows the battery to be disconnected; (4)electrical installation adapted for cooperation with agricultural machinery and equipment; 5) electric socket for cooperation with additional equipment. 3. Transmission 1)reversing gear with hydraulic reverse, 2)minimum 12 forward and 12 reverse gears, 3)maximum speed minimum 40 km/h; (4)A solution with additional crawling ratios to achieve very low driving speeds is permitted. 4. Rear power take-off (PTO) 1)independent rear PTO; 2) PTO switching hydraulically or electrohydraulic assisted; 3)Minimum 3 PTO speeds: 540/540E/1000 rpm; 4) the possibility of independent PTO switching on and off. 5. Drive and axes 1)four-wheel drive 4x4; 2) wheelbase minimum 2300 mm ,maximum 2400 mm; 3) turning radius max 4.50m; (4)Electrohydraulic actuation of the front axle drive or functionally equivalent; 5) rear axle differential lock; 6) Front axle differential lock or skid limiting solution; 7) a front axle designed to work with the front RUPD and front-mounted accessories, including the plough; 6. Hydraulic system 1)Hydraulic system to ensure the correct and independent operation of the steering system when powering the hydraulic receivers or a functionally equivalent solution; (2)Performance of the main hydraulic pump – minimum 60 l/min; 3)minimum 3 rear hydraulic sections with minimum 6 quick couplers; 4)rear hydraulic connections enabling the operation of receivers of one-sided and two-sided operation; 5) the possibility of configuring the functions of individual hydraulic sections depending on the application. 7. Rear lift 1)Rear three-point suspension system for Category II tools; 2)rear RUPD lift at a distance of 610 mm behind the tips – range from 3600 kg to 3800 kg 3)rear RUPD lift – range from 4200 kg to 4700 kg 4)rear control of RUPD: mechanical; 5)Hydraulic lifting system; (6)fast connectors of category II; 7)Function for quick lifting and lowering of tools; 8) the possibility of external control of the rear lift. 8. Front PTO and plow preparation 1) a tractor equipped with a front three-point tool suspension system (front PTO) with at least one pair of hydraulic outputs; 2)Front RUPD lifting capacity – minimum 2000 kg; 3) the previous RUPD powered by an additional 3-section hydraulic distributor; 4) control of the front RUPD and the hydraulics of the equipment from the operator's place using an additional, dedicated mechanical joystick; 5)hydraulic installation for safe cooperation with the front plough; 9. Cabin and operator's station 1)Closed cab, minimum 2 seats; 2) heating and air conditioning of the cabin; 3)operator seat cushioned mechan