Purchase of vehicles and equipment used for the implementation of OLiOC tasks
„Zakup pojazdów i osprzętu wykorzystywanych na potrzeby realizacji zadań OLiOC”
Poland · Wielowieś · how to bid here →
Your path to submission
- Deadline: 13 October at 08:00 — 10 days left.
- You submit on eZamówienia — not here and not by e-mail. ↗ Submission via eZamówienia: account required; above the EU threshold a qualified signature, nationally the 'trusted signature' often suffices — check the wording. Sort out account and signature first — not on submission day.
- Collect your evidence — the eligibility requirements are listed above; for many of them the analysis explains how to obtain them.
Clement What the numbers say about this buyer
- 28% of this buyer's awards went to companies that had already won here before (73 awards since 2018, spread over 52 companies). 72% went to new names.n = 73 awards since 2018
- The median procedure drew 2 bids (8 procedures with a bid count); 0% ended with a single bidder. Sector: median 3 bids.n = 8
- Not one of the 73 awards with a known winner country has gone to a foreign company so far. Sector average: 1%.n = 73
From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 30/09/2026.
Foreign bidders
In Poland · Mining & construction machinery, 22 contracts went to foreign companies over the last 3 years (of 3,260 recorded awards) — mostly from Czechia, Belgium, Germany.
Typical field: median 3 (from 867 awards).
What the buyer is looking for
1. Backhoe loader 18 t (+/- 5%) – technical requirements 1.1vehicle must be adapted to:a) operation at all times of the year and day in the weather conditions encountered in the Polish climate zone;b) drives on hard and ground roads;c)storage in a garage u/warehouse or outdoors;1.2 Drive system:a) diesel engine meeting the exhaust emission standard;b)power - minimum 170 hp; (c)4-wheel drive;(d)front steering axle;(e)fuel tank minimum 240 litres w; (f)minimum tyre 215/75R17,5;(g)wheels equal to the same tyre are allowed; (h)rear bridge with differential lock;(i)one lever change of direction; parking brake; the braking capability of each rear wheel; driving speed min, 30 km/h; 1.3 Plumbing (a)variable-spending piston pump; (b)a minimum capacity of 150 l/min;(c)a minimum working pressure of 300 bar; 1.4 Cabin (a)closed structure;(b)sound signal;(c)pneumatic adjustable seat, heated with…
Show full description
… safety belts;(d)factory air-conditioning;(e)heating and ventilation;(f)windscreen wipers and washer systems;(g)interior and exterior rear-view mirrors;(h)machine monitoring system;(i)warning light;(j)rear-view camera; (k)noise level max. 80 dB;1.5 Working system (a)Three-circuit working element; b)Boom length in the range of 4 m - 5 m;1c)Length at ground level with ipper in the range of 2.25 m to 9.20 m;d)Depth of digging with dipper in the range of 2.25 m to 6.10 m; e)Closing angle of the spoon5 in the range from 180° to 190°; 1.6 Transport dimensions a)Maximum width 2490 mm; (b)The overall height above the cab shall not exceed 3195 mm; (c)Length with dipper in the range: 2,25 m – 8223 mm;(d)Wheelbase between 2400 mm and 2500 mm; 1.7 Compulsory equipment (a)Operating instructions; (b)Warning triangle; (c)Self-refuelling pump; d) Shelves on the shoulder; e)Immobiliser; f)Radio; g)Additional LED working lights; 1.8 Equipment adapted to the tilt-and-turn head (a)Sorting gripper; (b)Asphalt milling machine; c)Hydraulic hammer; (d)Screening spoon5; (e)Ground compactor; f)Gear drilling rig with drill bit; g)Sweeper with a minimum width of 2300 mm; h)Hydraulic leveling lattice with a minimum width of 2400 mm; (i)Heavy duty finger gripper; As part of the order, the Ordering Party requires the provision of an extended package, free service protection for a 3-year period and a quality guarantee of the machine for a period of 36 months, a limit of 2000 motohours. The warranty period starts from the date of protocol collection of the backhoe loader. 2. 2 Low-bed semi-trailer – technical requirements 2.1. The trailer must be capable of: a) operation at all times of the year and day in the weather conditions encountered in the Polish climate zone; driving on hard and dirt roads; c) storage in a garage/warehouse or outdoors; 2.2 Dimensions (a) Length of the straight part of the machine between 6500 mm and 7000 mm; b) The total length of the platform in the range from 8200 mm to 8500 mm; c) Floor width between 2300 mm and 2600 mm; d) Minimum payload of 18,000 kg; 2.3 Equipment (a) Parabolic springs; Tyres 215/75R17,5; Hydraulic lowered/lifted overruns; d) Pneumatic brake system; e) Wooden flooring; f) LED lighting; g) Hydraulic installation of rear steering axle lock; 3. 3 Light goods trailer – technical requirements 3.1 The trailer must be capable of: a) operation at all times of the year and day in the weather conditions encountered in the Polish climate zone; driving on hard roads; c) storage in a garage/warehouse or outdoors; 3.2 Basic parameters a) loading length [mm] in the range of 2420 - 2520 interior (2500 - 2600 exteriors), b) loading width [mm] in the range of 1420 - 1520 interior (1500 - 1600 exterior), (c) maximum permissible mass up to 750 kg, (d) European type-approval, (e) tarpaulin with a height of max. 1800 mm, red, f) bu
Contract
Who has won here before
| Company | Awards | Period |
|---|---|---|
| REMONDIS TARNOWSKIE GÓRY SP. Z O.O. | 5 | 2021–2023 |
| OLS Sp. z o.o. Sp. k. | 4 | 2021–2025 |
| F.U.H.T. SARAH Sylwia Schygulla | 4 | 2021–2026 |
| R.Z. Waldemar Grochla | 3 | 2021–2023 |
| Nbit Jarosław Jenczmionka Sp. z o.o. | 2 | 2022–2026 |
How often this buyer tenders this
Who knows the rhythm prepares instead of reacting.
How to bid
Guide: how to apply on e-Zamówienia (Polen) → Registration, signature, fees — from the operator's bidder manual.