Purchase and delivery of municipal equipment for the needs of Kraśnik Municipality
,, ZAKUP I DOSTAWA SPRZĘTU KOMUNALNEGO NA POTRZEBY GMINY KRAŚNIK”
Poland · Kraśnik · how to bid here →
Your path to submission
- Deadline: 5 October at 08:30 — 1 day left.
- You submit on eZamówienia — not here and not by e-mail. ↗ Submission via eZamówienia: account required; above the EU threshold a qualified signature, nationally the 'trusted signature' often suffices — check the wording. Sort out account and signature first — not on submission day.
- Collect your evidence — the eligibility requirements are listed above; for many of them the analysis explains how to obtain them.
Clement What the numbers say about this buyer
- 29% of this buyer's awards went to companies that had already won here before (86 awards since 2015, spread over 54 companies). That is well above the sector norm (14%) — newcomers have a harder time here than elsewhere.n = 86 awards since 2015
- The median procedure drew 3 bids (9 procedures with a bid count); 11% ended with a single bidder. Sector: median 2 bids.n = 9
- 1% of awards went to companies from abroad (86 awards with a known winner country). Sector average: 0%.n = 86
From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 27/09/2026.
Foreign bidders
In Poland · Agricultural machinery, 9 contracts went to foreign companies over the last 3 years (of 2,671 recorded awards).
Typical field: median 2 (from 364 awards).
What the buyer is looking for
1. Zad. 1 (part 1) Purchase and delivery of chipper, sprinkler, plow, weights and a working head with a circular saw for the needs of the Municipality of Kraśnik. Specification of chipper: • Brand new • Disc chopper designed for shredding wood, branches and trunks with a diameter of up to 12 cm. • Having an independent hydraulic system with its own pump and oil tank. • Drive of the cutting unit transmitted from the tractor via the power take-off shaft • Equipped with hydraulically driven feed shaft(s). • Possibility of adjusting the feed speed to the type of shredded material by means of step-by-step adjustment. • The system should have the function of retracting the material in case of blockage. • Emergency stop. • Cutting disc with a diameter of not less than 55 cm and a minimum weight of 65 kg. • The chips obtained are approximately 20-50 mm in size. • Adjustable support knife that…
Show full description
… allows you to set the right cutting gap depending on the operating conditions. • Rotating ejection hopper with 360° rotation. • Ejection pipe not less than 180 cm high. • Possibility of folding the throat for transport • Suitable for mounting on a three-point suspension system (TUZ) of the tractor. • min. 4 double-sided knives with counter-blade / counter-blade Specification of the hanging spreader: • Brand new • Hopper made of stainless steel • Tank capacity min 550 kg • Disc and centrifugal spreading system • Sprinkling working width with municipal attachment 1.2-5 m • PTO shaft rotation 540 rpm • Tarpaulin • PTO shaft • Filter net Specification of snow plough: • Brand new • Width 3 m. • Working width min. 2,60/max.3,0 m. • Cross copying of the terrain • Cushioned blade • Clamping RUZ cat. II • Sliding • Rubber skirting board min. 50 mm. • Electrical connector 12V (3 PIN connector to the socket mounted on the RUPD) • Lighting • Two independently controlled deflectors • Infinite hydraulic adjustment of the deflector from the controller • Deflector height min. 1.1 m. • Turning angle 30o • Hydraulic cables included Specification of weights for rear wheels: • Brand new • For Deutz-Fahr 5125 tractor • 300 kg of 150kg per side • Together with the assembly set and installation on the site indicated by the Ordering Party Specification of the working head with circular saw: • Brand new • Fully compatible with SaMASZ KWT 550 EP • Working width 1,80m – 2,00m • Number of circular saws 3 pieces • Circular saw blade diameter min 600 mm • Maximum diameter of cut branches up to 120 mm • Head weight up to max. 200 kg The remaining description of the subject of the order is specified in the SWZ 2. Zad. 2 (part 2) Purchase and delivery of barrels (trailer with tank) for drinking water for the needs of the Municipality of Kraśnik. Trailer specification: • Brand new • DMC 2700 kg • Load capacity not less than - 2000 kg • Mounting on the chassis of a two-axle road trailer • Trailer without sides and walls - platform • Front supports 2 pcs. • Rear supports 2 pcs. • Support wheel • All galvanized • Braking system 2700 kg • Year of manufacture 2026 • Lighting installation (LED) Tank specification: • Brand new • Capacity - 1500 l • manhole DN450 equipped with a labyrinth vent. • Storz 52 or Storz 50 connector for filling or emptying the tank • DN50 food connector • Distribution collector • The entire water system in a lockable locking cabinet with a key. A detailed description of the subject of the contract has been specified in the SWZ 3. Zad. 3 (part 3) Purchase and delivery of an agricultural trailer for the needs of the Municipality of Kraśnik. Agricultural trailer specification: • Brand new • Single-axle or tandem • Load capacity not less than 4800 kg • Box wall height 500 mm + 500mm • Floor sheet thickness not less than 3 • Rigid suspension • Tyre size 11,5/80-15.3 • Three-way tipping system • Cargo box with universal wall opening system • Central locking at the floor of the side walls and rear wall • Three-sided tipping system of the box with pr
Contract
Who has won here before
| Company | Awards | Period |
|---|---|---|
| Przedsiębiorstwem Usługowo – Handlowym „RB4” Dariusz Bożek | 4 | 2023–2026 |
| FlexiPower Group Sp. z o.o. Sp. K. | 4 | 2024 |
| EKOLAND Sp. z o.o. | 3 | 2022–2024 |
| Matuszewski Mariusz Firma Usługowo Handlowa TREMBUD | 3 | 2025–2026 |
| Krystyna Strumińska | 3 | 2024–2025 |
How often this buyer tenders this
Who knows the rhythm prepares instead of reacting.
How to bid
Guide: how to apply on e-Zamówienia (Polen) → Registration, signature, fees — from the operator's bidder manual.