"Construction works in the office building of Nadleśnictwo Świebodzin" – II proceedings

… disassembly and re-assembly in designated places (according to the design) of information boards in communication routes; (d) installation of the lift in the existing hanging ceiling located in the office of the Forest District; (e) in the hall, the replacement of the radiator from the existing one to the decorative one (2 pcs). (b) As part of the construction works for segment B, the following must be carried out: (a) construction work for the repair of cracks, priming and painting of premises. Rooms without system suspended ceilings with coffers (e.g. toilets) need to renew the surface of the ceilings by primer and paint; (b) installation of a g-k slab cavity on the rack in the above-mentioned cavity at the elevator; (c) in a social room (‘Kitchen’) replace in existing buildings the cladding with a system - tempered wall glass; (d) in designated office rooms, on individual walls, photo wallpapers should be applied (material in the form of photos will be made available by the Ordering Party); (e) an exhaust fan shall be installed in the social room (‘kitchen’) with connection and connection to the chimney chess in the adjacent hygienic and sanitary room. An under-cabinet kitchen hood should be installed for existing cabinets; (f) fireplaces – roof launchers shall be installed within the roof; (g) ceiling lamps should be installed at the lift, taking into account changes in the location of sockets. (c) As part of investment works for segment A, the following should be carried out: (a) system wood-like cladding - "English" wall paneling; (b) system wood-like cladding - lamellas; (c) system wood-like cladding – decorative panels to be installed at the entrance door to individual rooms, together with information plates; (d) installation of smooth panels in the cavities of the hoods at the stairway; (e) delivery and installation of fabric-printed paintings – canvas weighing 300-360 g/m2 on a furniture board, large-format in the form of graphics (selected by the Ordering Party); (f) delivery and assembly of images printed on fabric – canvas weighing 300-360 g/m2 illuminated, images in the form of graphics (selected by the Ordering Party); (g) supply and installation of furniture with equipment – built-in cabinets; (h) supply and installation of furniture with equipment – built-in reception counter; (i) the delivery and assembly of the 3D logo together with the letters; (j) installation of 120 cm diameter RING ceiling lamps; (k) installation of led clinker lamps at rests; (l) delivery and installation of wall hangers in the installation on the panel. (d) As part of investment works for segment B, the following must be carried out: (a) within traffic routes, local buildings made of wood-like system cladding – ‘English’ wall panelling at resting places; (b) installation of a wall panel with a lamella (local decorative element) in the cavity near the elevator shaft and within the corridor; (c) wood-like system cladding – spot panels at the entrances to individual rooms (offices, conference room, etc.); (d) wood-like cladding, system - slats (painted - in the corridor, wooden at the entrance to the meeting room); (e) install wood-like decorative panels with information plates at the door joinery; (f) on the other walls of the