Campus equipment procurements 2026

… to the purchase of furniture into further sub-parts is unjustified, and the delivery of 7 products at different locations in the framework of a separate part would result in uneconomical implementation. Description of the detailed quantities in the procurement documents. For the quantities of specified dimensions, types of materials and product requirements, a +/- 15% deviation is accepted for non-standard products for the relevant, specified values, and for colours, the technical specifications and budgets are to be interpreted only as guidelines. The technical equivalence of wood, metal and plastic requirements is ensured only within the raw material. For furniture with a minimum thickness of 18 mm (sheet) deviation in the negative direction is not allowed! The size of the kitchen furniture and curtains is a fixed CA’s estimate, with the proviso that the feasibility of the specified dimensions must be assessed and, if necessary, clarified during the performance of the contract! The contracting authority draws the attention of the Honourable Economic Operators to the fact that, with regard to the proof of technical conformity, the tenderer must indicate in its tender the manufacturer, the specific type designation and the place of origin. These requirements can be verified, for example, with a "Technical Data Sheet" in which the clearly identifiable properties of the offered product, the manufacturer and type designation or the distributor/manufacturer URL or the manufacturer data sheet (in Hungarian or English) are indicated, supplemented by the duration of the warranty - a photograph may be attached of the properties of the given product supporting the prescribed parameter. More information in the documentation. The contracting authority draws the attention of the Honourable Economic Operators to the fact that it is necessary to provide a guarantee of at least 3 years for the products offered, if the manufacturer’s guarantee does not provide this by default, the requirement is to provide an extended or additional guarantee undertaken by a distributor/supplier (undertaken guarantee pursuant to Section 6:171(1) of the Civil Code). Part 2: PVC floor covering for Kodolányi János Secondary School and Székesfehérvár Vasvári Pál Secondary School in the framework of the project ‘Establishment of a Secondary School Campus’ for the following main quantities: Kodolányi János Secondary School: temporary protective cover (windable) for an outdoor sports field of 23x45 m, to be used at least 5 times a year; Vasvári Pál Secondary School in Székesfehérvár: temporary protective cover (windable) for an outdoor sports field of 21x41 m, to be used at least 5 times a year; For both sports grounds, the guard shall meet at least the following requirements: Hardness min. 80 (+ /- 5) Sh Temperature range: -25 degrees Celsius to +80 degrees Celsius Thickness: Min. 3mm Density: min 1.55 g/cm3 With double internal reinforcement Its colour should not be black, so as not to colour the existing sports cover - the grey version is preferred Roll-on version Suitable for outdoor use at least 5 times a year. The subdivision of the floor coverings into further sub-parts is also unjustified, with identical products placed on the same site.