Friedrich & ClementBETA

Személy- és haszongépjármű flottaüzemeltetés 2026

Hungary · Budapest · how to bid here →

Your path to submission

  1. Deadline: 19 October at 10:00 — 16 days left.
  2. The submission point is stated in the notice (link on the right).
  3. Offer and evidence in: HUN.
  4. Collect your evidence — use the eligibility analysis above: it lists the requirements and, for known certificates, how to get them.
Compiled automatically from notice and documents — no guarantee; the procedure's wording is binding.

Clement What the numbers say about this buyer

  • In this sector the buyer awards roughly every 3 months (17 awards, most recently June 2026) — by that rhythm the next award was due around September 2026. The last award went to Csúcs-Forma Kft..n = 17
  • 24% of this buyer's awards went to companies that had already won here before (179 awards since 2015, spread over 29 companies). That is well below the sector norm (46%) — this buyer switches suppliers more often than others.n = 179 awards since 2015
  • The median procedure drew 2 bids (174 procedures with a bid count); 49% ended with a single bidder. Sector: median 2 bids.n = 174
  • 4% of awards went to companies from abroad (179 awards with a known winner country). Sector average: 2%.n = 179
  • 0% of the bids received came from other countries (72 procedures with a bid mix) — all bidders, not just the winners. Sector: 0%.n = 72

From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 27/09/2026.

Clement
When comparable contracts were last awarded here, usually only 2 offers came in — a solid bid has real chances.
References and certificates from your home country count fully across the EU — that is what European procurement law is for.

Foreign bidders

In Hungary · Repair & maintenance, 12 contracts went to foreign companies over the last 3 years (of 1,228 recorded awards).

Submission language: HUN.

Typical field: median 2 (from 17 awards).

Measured from linked award data; foreign winners bidding through a local subsidiary count as domestic — the true share is higher.

What the buyer is looking for

Operation of a passenger car fleet as follows: - 1 new 7-seater monovan, Mileage: 20,000 km/year Engine: Hybrid (HEV), minimum cylinder capacity: 1500 ccm, performance minimum: 200 hp, gearbox: 6-speed automatic transmission, drive: all-wheel drive, number of seats: 7 seater, version: 5 doors, minimum length: 4830 mm, minimum width: 1850 mm. - 1 new boxed commercial vehicle, bodywork: closed small goods transport, driven axle: first, total length: max. 5,000 mm, overall width, with external mirrors: max. 2 210 mm, total height: max. 2 000 mm, wheelbase: min. 2 800 mm, load compartment length: min. 2 150 mm, load compartment width: min. 1 495 mm, load compartment height: min. 1 265 mm, load compartment volume: min. 3.7 m3, expected load capacity: min. 650 kg, double cab, cubic capacity min. 1450 ccm, fuel: diesel, min. power 100 hp, closed, interior-clad cargo compartment with rear and…

Show full description

… side doors, diesel engine with a rating of at least EUR06. - 1 new platform commercial vehicle Body: Chassis with single cab, driven axle: 4x2, front or rear wheel drive, bodywork: Plateau, total length: max. 5 800 mm, overall width, with external mirrors: max 2 500 mm, overall width, without outer mirrors: max. 2 150 mm, total height: max. 2 230 mm, wheelbase: min. 3 500 mm, platform length - inner: min. 3 200 mm, platform width – internal min: 2 000 mm, platform height: min. 400 mm, expected load capacity: min. 1,300 kg, towing device, with a maximum permissible braked towable mass of 2400 kg or more, cubic capacity min.-1950 ccm, fuel: diesel, min. power 130 hp, cab suitable for transporting 3 persons. The successful tenderer shall provide vehicle fleet management services for a total fleet of 1 passenger car and 2 commercial vehicles, consisting of vehicles with the performance and equipment specified in the technical specifications, which shall include the provision of the vehicle in the fleet to the Customer. Main tasks of the winning tenderer (tasks detailed in the draft contract and the technical description): • Ensuring the use of the vehicle • Organizing and arranging, at a time agreed with the Customer, full warranty and inspection inspections of the used vehicle and the repair of other defects • Providing seasonal winter-summer tires twice a year, replacing tires, and storing the replaced tires. • Making and maintaining CASCO insurance. • performing record-keeping and management tasks related to insurance. • the provision of a temporary replacement vehicle in the event of the vehicle being unserviceable for more than 24 hours under the assistance and the provision of onward travel or accommodation also under the assistance. • provision of assistance services for the delivered vehicle, rescue if necessary, as detailed in the technical specifications and the draft contract. • bring-and-take service • handling of damages The detailed task description is included in the technical specifications and the draft contract.

Machine translation (EU eTranslation) — official wording via the PDF link.

What you must prove — eligibility criteria

›
References: services
M/1. A 321/2015. (X. 30.) Korm. rendelet 1. § (1) bek és 5. § (1) bek alapján az ajánlattevőnek az ajánlatában csatolnia kell az egységes európai közbeszerzési dokumentumot, melynek elegendő a IV. részének „α” szakaszát kitölteni - a Korm. rend 2. § (5) bek al… ▸▾
M/1. A 321/2015. (X. 30.) Korm. rendelet 1. § (1) bek és 5. § (1) bek alapján az ajánlattevőnek az ajánlatában csatolnia kell az egységes európai közbeszerzési dokumentumot, melynek elegendő a IV. részének „α” szakaszát kitölteni - a Korm. rend 2. § (5) bek alapján az AK elfogadja az érintett gazdasági szereplő egyszerű nyilatkozatát is az M/1. szerinti műszaki-szakmai alkalmassági követelmény előzetes igazolására. A Korm. rendelet 1. §-ának (2) bek alapján az AK által a Kbt. 69. § (4)-(7) bek alapján az alkalmassági követelményekre vonatkozó igazolások benyújtására felhívott ajánlattevőnek a Korm. rendelet IV. Fejezetének megfelelően kell igazolnia, hogy megfelel az előírt alkalmassági követelményeknek, az alábbiak szerint: M/1. Az Ajánlattevőnek az M/1. számú műszaki és szakmai alkalmassági feltétel teljesülését a 321/2015. (X.30.) Korm.r. 21. § (3) bek. a) pontja alapján az eljárást megindító felhívás feladásának napjától visszafelé számított három évben (36 hónapban) teljesített és az eljárást megindító felhívás feladásától visszafelé számított hat évben (72 hónapban) megkezdett legjelentősebb közbeszerzés tárgya szerinti referenciá(i)nak bemutatásával – figyelemmel a 321/2015. (X. 30.) Korm. rend. 21. § (3a) bekezdésben és a 23. §-ában foglaltakra – a szerződést kötő másik fél által adott igazolással, vagy az ajánlattevő nyilatkozatával kell igazolnia. A szerződést kötő másik fél által adott igazolásnak tartalmaznia kell legalább: - a szerződést kötő másik fél nevét és címét, - a szerződést kötő másik fél kapcsolattartójának nevét és elérhetőségét, - a referenciamunka tárgyának rövid leírását olyan részletességgel, melyből az alkalmassági feltételnek való megfelelés egyértelműen megállapítható (az alkalmassági feltétel tekintetében releváns mennyiségi adatokat), - a teljesítés alkalmasság szempontjából releváns mennyiségi paramétereit, - a teljesítés idejét (teljesítés kezdésének és befejezésének időpontja év/hónap/nap formátumban), továbbá - nyilatkozatot arról, hogy a teljesítés az előírásoknak és a szerződésnek megfelelően történt-e. Az ajánlatkérő a 321/2015. (X. 30.) Korm. rendelet 21/A. §-ára figyelemmel jelzi, hogy elfogadja azon megvalósult teljesítések igazolását is, amelyek esetén bár szerződésszegés történt, de a gazdasági szereplő szerződésszegésért való felelőssége – a szerződést kötő másik fél által nem vitatottan – nem áll fenn. Ebben az esetben a szerződést kötő másik fél által adott igazolásnak (referenciaigazolásnak tartalmaznia kell a 321/2015. (X. 30.) Korm. rendelet 22. § (2) bekezdése második és – adott esetben – harmadik mondatában foglaltakat is. Az ajánlatkérő a - fentieken túli - egyéb szerződésszegéssel érintett teljesítések igazolását nem fogadja el. Az ajánlatkérő a referenciamunka tekintetében a kezdő napon a szerződés megkötésének napját érti. A műszaki-szakmai alkalmasság igazolása vonatkozásában alkalmazandóak továbbá a Kbt. 65. §-ának (6)-(7), (9) és (11)-(12) bekezdéseiben, a Kbt. 69. §-ának (11a) bekezdésében, valamint a Kbt. 140. §-ának (9) bekezdésében foglaltak. Az ajánlatkérő felhívja továbbá a figyelmet a Korm.r 24. §-ának (2) bek.-re. Az ajánlatkérő felhívja a figyelmet a Korm.rendelet 21. § (3a) bekezdés a) pontjára, 21/A. §-ára és 22. § (5) bekezdésére is. Ha az előírt alkalmassági követelményeknek az ajánlattevő más szervezet kapacitására támaszkodva felel meg, e szervezetnek - az általa igazolt alkalmassági követelmények tekintetében – az ajánlattevő tekintetében előírt igazolási módokkal azonos módon kell igazolnia az adott alkalmassági feltételnek történő megfelelést [Kbt. 67. § (3) bekezdés]. M1.) Alkalmatlan az ajánlattevő, ha nem rendelkezik az eljárást megindító felhívás feladásának napjától visszafelé számított három évben teljesített és az eljárást megindító felhívás feladásának napjától visszafelé számított hát évben megkezdett, legalább 1 db személy- vagy haszongépjármű flottaüzemeltetésére vonatkozó referenciával. [Kbt. 65. § (1) b), 321/2015. (X. 30.) Korm. rendele
Requirement texts are quoted in the notice's original language — the official wording is binding.

Contract

BuyerVárosliget Ingatlanfejlesztő Zártkörűen Működő Részvénytársaság
TypeServices
Estimated valuevalue not published
Published21 September 2026
CategoryRepair & maintenance · CPV 50111100

Who has won here before

CompanyAwardsPeriod
VALTON-SEC Kereskedelmi és Szolgáltató Zártkörűen Működő Részvénytársaság92022–2026
Museum Complex Szállítmányozó és Szolgáltató Korlátolt Felelősségű Társaság92023–2026
B+N Referencia Ipari, Kereskedelmi és Szolgáltató Zrt.52022–2025
KONE Felvonó Kft.42025
ÓBUDA-ÚJLAK Beruházásszervező és Fővállalkozó Zrt.42015
From 17.9M documented awards · regular winners know this buyer's requirements — that is your competition.

How often this buyer tenders this

202412
20256
202618

Who knows the rhythm prepares instead of reacting.

·
days until the deadline — Monday 19 October at 10:00

How to bid

Read the full notice — Original + documents
Goes directly to this tender on TED — Tenders Electronic Daily. The full specification and all annexes are there.

Tender documents — direct download

Specifications and annexes hosted by the buyer — usually accessible without registration.
Friedrich finds tenders like this for you — every morning at 7:30, and he learns from your feedback.
Register now →