Friedrich & ClementBETA

Dynamic Purchasing System for Transport Container systems, PREFAB system, Design, Service and Repair/Maintenance

Denmark · Ballerup · how to bid here →

Your path to submission

  1. Deadline: 31 December 2027 at 23:59 — 455 days left.
  2. The submission point is stated in the notice (link on the right).
  3. Offer and evidence in: ENG, ENG, ENG, ENG, ENG, ENG, ENG, ENG.
  4. Collect your evidence — use the eligibility analysis above: it lists the requirements and, for known certificates, how to get them.
Compiled automatically from notice and documents — no guarantee; the procedure's wording is binding.

Clement What the numbers say about this buyer

  • In this sector the buyer awards roughly every 2 months (27 awards, most recently August 2026) — the next award is due around October 2026 by that rhythm. The last award went to Container Providers International ApS.n = 27
  • 12% of this buyer's awards went to companies that had already won here before (316 awards since 2021, spread over 214 companies). That is well below the sector norm (41%) — this buyer switches suppliers more often than others.n = 316 awards since 2021
  • 36% of awards went to companies from abroad (316 awards with a known winner country). Sector average: 8%.n = 316
  • The median procedure drew just one bid (276 procedures with a bid count); 53% ended with a single bidder. Sector: median 4 bids.n = 276
  • The award came in at a median 79% of the estimated value (10 awards with both estimate and value) — pricing at the estimate is usually too high here. Sector: 102%.n = 10

From this buyer's documented awards; comparison values from the same sector and country. Not a forecast, not legal advice. As of 27/09/2026.

Clement
When comparable contracts were last awarded here, usually just a single offer was on the table — a solid bid has real chances.
References and certificates from your home country count fully across the EU — that is what European procurement law is for.

Foreign bidders

In Denmark · Transport equipment, 39 contracts went to foreign companies over the last 3 years (of 590 recorded awards) — mostly from Germany, Sweden, Poland.

Typical field: median 1 (from 23 awards).

Measured from linked award data; foreign winners bidding through a local subsidiary count as domestic — the true share is higher.

What the buyer is looking for

These Container Systems will be used by the Danish Defence for transport and storage of goods or for donation purposes. The Container Systems in this category are used transport containers with a random color and BIC code. Can upon DALO request be upgraded with optional price list items. Delivery time: Short. For immediate transportation demands and fast deployment. · These Container Systems will be used by the Danish Defence for transport and storage of goods. The Con-tainer Systems in this section are new transport containers with a prespecified color and market with DA-LO BIC code. Can upon DALO request be upgraded with optional price list items. Delivery time: Short to Medium. For immediate transportation demands and fast deployment. · These Container Systems will be used of the Danish Defence for transport and storage of goods that needs to be lashed in a certain way and therefore…

Show full description

… requires a flexible anchoring/lashing system that is beyond what a standard transport container can accommodate. The Container Systems in this section are new transport containers modified with extra anchoring points, a prespecified color and market with DALO BIC code. Can upon DALO request be upgraded with optional price list items. Delivery time: Medium to Long. · These PREFAB Systems are for office and administration, living, living space, storage, depot, dining rooms and infirmary facilities. The PREFAB systems will be in different types and in it must help to provide satis-factory living conditions and support operational, logistical and managerial activities over a longer period of time. PREFAB must have as energy-efficient a profile as possible in order to optimize resource consump-tion. The PREFAB should have the similar size to an 20 ́ISO container whit the possible of connecting more than one together. It should further be possible to Assemble the PREFAB on site, meaning that it is possible to stack and transport without exciting the height of an 20 ́ISO container. · The DEMA (Danish Emergency Management Agency) will use this PREFAB for office, accommodations, kitchen, morgue, medical facility etc. DEMA is using the PREFAB primary for fast, easy and flexible solu-tions for operations in distressed areas around the world. The PREFAB is based on lightweight materials and assembled with simple tools, meaning that you can set it up with only a small group of people in a cou-ple of hours and with no need of heavy lifting equipment. · This category will be used of the Danish Defence for Service, repair and maintenance of new and old con-tainers in the fleet of Container Systems to secure that operational/functional, meets the statutory demands and are safe to use. • Repair and maintenance services • Man hours: Design, Documentation, Manufacturing, Service and Maintenance • Electrical services • Heating-system services • Plumbing services • Ventilation services • CSC recertification • Certification • Spareparts · This category will be used by the Danish Defence for complete New design, upgrade or modification of new and old containers. • Man hours: Design, Documentation, Manufacturing, Service and Maintenance • Components and semi-finished product • Installation services (except software) • Construction, engineering and inspection services · This category includes all that is not system specific to the CS-PREFAB. It can be third party product that are agnostic to the above 7 categories. Examples of accessories to the CS-PREFAB are: • Furniture (incl. office furniture), furnishings, domestic appliances (excl. lighting). • Electrical components and installations • Emergency and security equipment • Surface treatment, paint and colour • Construction materials and associated items • Site preparation work • Multi-functional buildings construction work • Transport services (excl. Waste transport) • Education and training services An applicant can apply for acceptance in one, more or all eight categories.

Machine translation (EU eTranslation) — official wording via the PDF link.

What you must prove — eligibility criteria

›
ef-stand
Financial ratio Description (English): Concerning the financial ratios specified in the relevant notice, the procurement documents or the ESPD, the economic operator declares that the actual values for the required ratios are as follows: The equity ratio (calc… ▸▾
Financial ratio Description (English): Concerning the financial ratios specified in the relevant notice, the procurement documents or the ESPD, the economic operator declares that the actual values for the required ratios are as follows: The equity ratio (calculated by dividing the tenderer’s equity with the tenderer’s total assets (equity/total assets x 100) at the end of the last 3 financial years available. The tenderer must have an equity ratio of at least 10 per cent in each of the last 3 financial years available. The tenderer and other entities, if any, must state the 1) equity, 2) total assets and 3) equity ratio as key figures in the ESPD. The equity and total assets must be stated in EUR. If the tenderer is composed of a group of entities (e.g. consortium), including temporary joint ventures, the equity ratio will be calculated by dividing the sum of the equities of all participants with the sum of the total assets of all participants (the sum of equities/the sum of total assets x 100) in each of the last 3 financial years available. If the tenderer relies on the economic and financial standing of an entity or entities (e.g. a parent or sister company or a subcontractor), the equity ratio will be calculated by dividing the sum of the tenderer’s and the entity’s/entities’ equity with the sum of the tenderer’s and the entity’s/entities’ total assets (the sum of equities/the sum of total assets x 100) in each of the last 3 financial years available. Upon request from DALO, the tenderer must submit the following documentation: Annual reports or excerpts thereof or other documentation stating the tenderer’s equity and total assets at the end of the last 3 financial years available if publication of annual reports is required under the law of the country in which the tenderer is established. Where groups of entities (e.g. consortiums), including temporary joint ventures, participate jointly in the tender procedure, the documentation must be provided for each of the participating entities. If the tenderer relies on the economic and financial standing of another entity or other entities (e.g. a parent or sister company or a subcontractor), the documentation must also be provided for each such entity or entities. Financial ratio Description (English): Concerning the financial ratios specified in the relevant notice, the procurement documents or the ESPD, the economic operator declares that the actual values for the required ratios are as follows: The equity ratio (calculated by dividing the tenderer’s equity with the tenderer’s total assets (equity/total assets x 100) at the end of the last 3 financial years available. The tenderer must have an equity ratio of at least 10 per cent in each of the last 3 financial years available. The tenderer and other entities, if any, must state the 1) equity, 2) total assets and 3) equity ratio as key figures in the ESPD. The equity and total assets must be stated in EUR. If the tenderer is composed of a group of entities (e.g. consortium), including temporary joint ventures, the equity ratio will be calculated by dividing the sum of the equities of all participants with the sum of the total assets of all participants (the sum of equities/the sum of total assets x 100) in each of the last 3 financial years available. If the tenderer relies on the economic and financial standing of an entity or entities (e.g. a parent or sister company or a subcontractor), the equity ratio will be calculated by dividing the sum of the tenderer’s and the entity’s/entities’ equity with the sum of the tenderer’s and the entity’s/entities’ total assets (the sum of equities/the sum of total assets x 100) in each of the last 3 financial years available. Upon request from DALO, the tenderer must submit the following documentation: Annual reports or excerpts thereof or other documentation stating the tenderer’s equity and total assets at the end of the last 3 financial years available if publication of annual report
›
sui-act
›
tp-abil
›
ef-stand
›
sui-act
›
tp-abil
›
ef-stand
›
sui-act
›
tp-abil
›
ef-stand
›
sui-act
›
tp-abil
›
ef-stand
›
sui-act
›
Security/guarantee required
Requirement texts are quoted in the notice's original language — the official wording is binding.

Contract

BuyerDanish Ministry of Defence Acquisition and Logistics Organisation
TypeSupplies
Estimated value200.000.000 DKK
Published22 April 2024
CategoryTransport equipment · CPV 34220000

Who has won here before

CompanyAwardsPeriod
Container Providers International ApS72025–2026
Kongsberg Defence & Aerospace As32024–2025
Precision Technic Defence A/S32024–2025
Defense Security Cooperation Agency, Foreign Military Sales (FMS)32023–2024
Blue Water Shipping A/S32024–2025
From 18.0M documented awards · regular winners know this buyer's requirements — that is your competition.

How often this buyer tenders this

202421
202516
202624

Who knows the rhythm prepares instead of reacting.

·
days until the deadline — Friday, 31 December 2027 at 23:59

How to bid

Read the full notice — Original + documents
Goes directly to this tender on TED — Tenders Electronic Daily. The full specification and all annexes are there.

Tender documents — direct download

Specifications and annexes hosted by the buyer — usually accessible without registration.
Friedrich finds tenders like this for you — every morning at 7:30, and he learns from your feedback.
Register now →